Landoll Corporation

Search the Site  

Home > Products > Farm Equipment > Landoll Farm Equipment > 875/876 Tilloll

875/876 Series Tilloll

Description

"One Trip" Proven Seedbed Preparation Machine

875876Tilloll_270x371px.jpg

Conditions at planting time are all-important to crop yields, and soil conditions and seedbed preparations are a major factor.  Leveling, incorporating and bringing the soil to a nearly perfect seedbed condition in one trip across the field is what the Tilloll from Landoll is all about. Reducing field trips will save fuel, operator labor and equipment dollars.  Combining field trips also conserves moisture and provides a firmer seedbed.  The soil is worked fewer times, depositing erosion resistant residue and coarser soil on the surface to prevent sealing.  Chemicals are successfully mixed throughout the seedbed in a single high-speed pass.

True One Pass Tool

The Landoll 875/876 Series Tilloll was designed from the ground up as a true one pass seedbed preparation tool, not as an afterthought as a modified field cultivator.  The Tilloll has 10 degree disc angles with spray shields behind the disc gangs to knock down soil to allow a smooth surface for chemical application.  The Tilloll offers spring cushion shanks with 10” sweeps; under frame clearance is 25 1/2”.  There is an incorporating reel behind the shanks to mix and blend the soil with the finer particles in the seedbed zone while incorporating chemicals.  Clods and residue are left on the surface to curtail erosion.  The field is finished with a heavy-duty three bar spike harrow.

Unique Design

The incorporation reel and the spray shield are unique to the design of the Landoll 875/876 Tilloll. The unique disc combination resists conventional disc ridging.  Couple that with the adjustable three bar spike harrow and you have the recipe for the finest finisher in the industry.  Nobody does it better than Landoll when it comes to making the perfect seedbed in one trip across the field!

Features

True One Pass Tool

  • Laser Cut, Robotically Welded Frame
  • T-Type Self-Leveling Hitch
  • 7 1/2 Degree Wing Float Up and Down
  • Rock Flex Bearing Standards on Disc Gangs and Incorporation Reel
  • Mechanical Ratchet Depth Adjustment
  • 20” Concave Disc Blades Spaced at 7 1/2”
  • 10 Degree Gang Angle
  • Spring Loaded Scrapers
  • Soil Deflector/Spray Shields on Disc Gangs
  • Spring Clamp Shanks with 150 lbs. Point Load
  • Edge Bent Shanks
  • 8” Shank Spacing with 10” Sweeps
  • Heavy-Duty 3 Bar Spike Harrow with Adjustable Down Pressure
  • Yellow Powder Coat Paint
  • Safety Warning Lights

Compare Models

How does Landoll stack up against the competition? 

Read more

Specs

875-10D 875-13D 875-15 875-15F 875-18 875-21 875-25 876-30 876-35 876-40
Approximate Weight 5,059 lbs. (2,295 kg) 5,753 lbs. (2,610 kg) 6,090 lbs. (2,762 kg) 6,900 lbs. (3,130 kg) 9,700 lbs. (4,400 kg) 10,050 lbs. (4,559 kg) 10,917 lbs. (4,952 kg) 15,800 lbs. (7,167 kg) 16,700 lbs. (7,575 kg) 18,800 lbs. (8,528 kg)
Working Width 10 ft. 6 in. (3.2 m) 13 ft. 6 in. (4.1 m) 15 ft. 0 in. (4.6 m) 15 ft. 0 in. (4.6 m) 18 ft. 0 in. (5.5 m) 21 ft. 0 in. (6.4 m) 25 ft. 6 in. (7.8 m) 30 ft. 0 in. (9.1 m) 34 ft. 6 in. (10.5 m) 40 in. 0 in. (12.2 m)
Transport Width 12 ft. 0. (3.7 m) 15 ft. 0 in. (4.6 m) 16 ft. 6 in. (5.0 m) 9 ft. 4 in. (2.8 m) 10 ft. 6 in. (3.2 m) 12 ft. 4 in. (3.8 m) 15 ft. 0 in. (4.6 m) 16 ft. 6 in. (5.0 m) 17 ft. 9 in. (5.4 m) 17 ft. 9 in. (5.4 m)
Transport Height N/A N/A N/A 8 ft. 6 in. (2.6 m) 8 ft. 6 in. (2.6 m) 8 ft. 6 in. (2.6 m) 8 ft. 6 in. (2.6 m) 8 ft. 6 in. (2.6 m) 13 ft. 0 in. (4.0 m) 13 ft. 9 in. (4.2 m)
Type of Fold Non-Folding Non-Folding Non-Folding Single Fold Unit 180 Degree Fold System 180 Degree Fold System 180 Degree Fold System 180 Degree Fold System Stack Fold System Stack Fold System
Number of Shanks 14 18 20 20 24 28 34 40 46 52
Shank Type Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank Spring Clamp, Edge Bent Shank
Shank Size 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm) 0.5625 in. x 1.75 in. (14.3 x 44.5 mm)
Point Load 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg) 150 lbs. (68 kg)
Shank Spacing 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm)
Under Frame Clearance 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm) 25.5 in. (648 mm)
Sweeps 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm) 10 in. (254 mm)
Number of Blades 14 20 22 22 26 30 38 46 54 60
Soil Deflector/Spray Shield Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs Mounted Behind Gangs
Blade Diameter 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm) 20 in. (508 mm)
Blade Thickness 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm) 0.197 in. (5.0 mm)
Blade Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity
Blade Spacing 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm) 7.5 in. (191 mm)
Reversible Blade Scrapers 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm) 4 in. x 0.179 in. (102 x 4.5 mm)
Gang Protection Rock Flex Mount Rock Flex Mount Rock Flex Mount Rock Flex Mount Rock Flex Mount Rock Flex Mount Rock Flex Mount Rock Flex Mount Rock Flex Mount Rock Flex Mount
Gang Spool 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm) 3.5 in. x 3.0625 in. (89 x 78 mm)
Gang Angle 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree
Gang Shaft 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.5 in. (38.1 mm)
Gang Bearings 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable 1.5 in. (38.1 mm) Flange Type Greaseable
Chopper Reel and 3-Bar Spike Drag Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Chopper Reel Size 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter 16 in. (406 mm) Diameter
Chopper Reel Bars 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled
Chopper Reel Bearings Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection Trunnion Bearings with C-Flex Protection
Chopper Reel Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle Mounted at 10 Degree Angle
3-Bar Spike Drag Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure Adjustable Down Pressure
3-Bar Spike Drag Angle Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable
Spike Size 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm) 0.75 in. x 11 in. (19.0 x 0279 mm)
Spike Spacing Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers Spaced on 2.5 in. (63.5 mm) Centers
Frame Sizes 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm)
4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm) 4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment
Walking Tandems Standard Standard Standard Single Wheels Standard Standard Standard Standard Standard Standard
Wing Axles N/A N/A N/A Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment Indvidual Wheel Arm Weldment
Walking Tandems on Wings N/A N/A N/A N/A N/A N/A N/A N/A Standard Standard
Wing Flex N/A N/A N/A 7.5 Degrees Up/Down 7.5 Degrees Up/Down 7.5 Degrees Up/Down 7.5 Degrees Up/Down 7.5 Degrees Up/Down 7.5 Degrees Up/Down 7.5 Degrees Up/Down
Tire Size - Main Frame (4) 11L x 15-10 Ply (4) 11L x 15-10 Ply (4) 11L x 15-10 Ply (2) 11L x 15 Hwy Load F (4) 11L x 15 Hwy Load F (4) 11L x 15 Hwy Load F (4) 11L x 15 Hwy Load F (4) 11L x 15 Hwy Load F (4) 12.5L x 15 Hwy Load F (4) 12.5L x 15 Hwy Load F
Wheel Hubs - Main Frame 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 8-Bolt 8-Bolt 8-Bolt
Spindles - Main Frame 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2.125 in. (54.0 mm) Slip-In Spindles 2.125 in. (54.0 mm) Slip-In Spindles 2.125 in. (54.0 mm) Slip-In Spindles
Tire Size - Wing Frame N/A N/A N/A (1) 11L x 15 Hwy Load F (2) 11L x 15 Hwy Load F (2) 11L x 15 Hwy Load F (2) 11L x 15 Hwy Load F (2) 11L x 15 Hwy Load F (4) 11L x 15 Hwy Load F (4) 11L x 15 Hwy Load F
Wheel Hubs - Wing Frame N/A N/A N/A 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt
Spindles - Wing Frame N/A N/A N/A 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles 2 in. (50.8 mm) Slip-In Spindles
Hitch Type Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment
Hitch Category Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip Cat. II Single Lip
Machine Depth Control Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder Stroke Control on Master Cylinder
Safety Warning Lights and SMV Emblem Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Yellow Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
10 in. Ultra Wing Sweeps Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Cat. III Single Lip Hitch Clevis (2 in. Hole) Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Horsepower Requirements 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot 9 to 11 HP (7 to 8 kW) per Foot

Specifications subject to change without notice.

Videos

Literature

Downloadable Literature

875/876 Tilloll

875/876 Tilloll (Printable Version)

Request Printed Literature

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.

Note: To request literature for multiple products, visit our Literature Request page.


 

Captcha Code

Click the image to see another captcha.
 

Manuals

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for the 875 Tilloll.

This manual contains repair part listings for the 875 Tilloll.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for the 876 Tilloll.

This manual contains repair part listings for the 876 Tilloll.

To view manuals for previous versions of this or a different product line, click here.