Landoll Corporation

Search the Site  

Home > Products > Farm Equipment > Landoll Farm Equipment > 9600 Field Cultivator

9600 Series Field Cultivator

Description

The New Era in Field Cultivators

9600FieldCultivator_270x265px.jpg

The Landoll 9630/9650 Series Field Cultivator started with the need for efficiency.  High residue levels, larger acreages, higher horsepower tractors and an ever shrinking window of planting opportunities, the design team at Landoll had set the bar high.  Customer feedback from today’s top producers was used to eliminate the shortfalls found on competitive units.  All aspects of ultimate seedbed preparation were taken into consideration in the new design of the 9600 Series Field Cultivator.

It Starts with the Frame

High capacity tillage tools need to have a solid foundation to build from.  The Landoll 9630/9650 Series Field Cultivator uses precision, laser cut structural steel frame members that are robotically welded for ultimate strength and reliability.  This process of manufacturing provides the end user with piece of mind that the Landoll 9600 Series Field Cultivator will be reliable day after day and season after season.  The deep frame allows for a “split the middle” shank arrangement for unrestricted residue flow for perfect seedbed preparation.  The frame is the anchor for the self-leveling hitch and walking tandem transport axles.  The shanks are attached to 4” x 3” structural steel tubes that offer true 6” shank spacing on all models.

There's More

UHMW polymer is used on all rockshaft bearing surfaces.  This provides for maintenance-free operation in this high wear area.  The lift circuit uses 10” stroke phasing cylinders throughout for even raise/lower cycles.  The cylinders use hardened bushings in all pivots and nickel and chrome plated rods for extended life.  Single point depth control at the front of the machine provides precise depth control in ¼” increments.  Pivoting wing gauge wheels are standard on the 28 through 50 foot models.  1 ¼” hinge pins on the wing fold operate on UHMW maintenance-free bushings.

The Heart of the 9630/9650 Series

The shank is the heart of the Field Cultivator.  Landoll offers two styles of shanks on the 9600.  The spring tension shanks offer up 190 lbs. of point load with a 10” trip height, and 26 ½” under frame clearance.  6” spacing with standard 47 degree 8” sweeps will completely till the full width of the machine.  The spring towers feature a Connex wear bushing.  These bushings are Nitrotec® coated for increased wear and corrosion resistance.  The clamp assemblies utilize laser cut components for ease of assembly.  Extension style springs are used exclusively on all Landoll spring tension shanks. A two piece s-tine shank assembly is also available as an option in rock free conditions.  Like its counterpart, it has 190 lbs. of point load and uses 47 degree sweeps.

Fit and Finish

The Landoll 9600 Series is available in sizes from 20’ 6” to 50’ 6”.  The 9630 models are 3 section units and the 9650 models are 5 section units.  Horsepower requirements are in the 7 to 9 HP per foot range.  The final field finish will be determined by which optional leveling device is chosen.  Choose between a 4-Row Coil Tine, 3-Row Coil Tine with Reel, 5-Row Spike and 3-Bar Spike with Reel.  A rear hitch for towing additional implements is also available.

Features

Features for Outstanding Performance

  • Laser Cut, Robotically Welded Frame
  • 135” Frame Depth
  • 30” Minimum Between Shank Ranks
  • Self-Leveling Hitch
  • Cast Single Lip Hitch Cat. III or Cat. IV  (Model Dependent)
  • Outrigger Gauge Wheels on 28’ - 50’ Models
  • Shanks with 190 lbs. Point Load (Spring Clamp or Two Piece S-Tine)
  • 26 ½” Under Frame Clearance
  • 6” Shank Spacing
  • 8” Sweeps, 47 degree
  • Shanks Centered on Tires
  • Walking Tandems in All Locations
  • 11L x 15-12 Ply, 12.5L x 15-12 Ply, 12.5L x 15 Load Range F (Model Dependent)
  • Single Point Depth Control
  • Blue Powder Coat Paint
  • Safety Warning Lights

Compare Models

How does Landoll stack up against the competition? 

Read more

Specs

9600 Series Field Cultivator

9630-20 9630-24 9630-28 9630-30NC 9630-30 9630-32 9630-34 9650-38 9650-42 9650-46 9650-50
Approximate Weight - Spring Shanks 9,600 lbs. (3,130 kg) 10,165 lbs. (4,611 kg) 10,625 lbs. (4,819 kg) N/A 11,500 lbs. (5,216 kg) N/A 11,940 lbs. (5,416 kg) 16,440 lbs. (7,457 kg) 17,640 lbs. (8,001 kg) 18,400 lbs. (8,346 kg) 18,950 lbs. (8,596 kg)
Approximate Weight - S-Tine Shanks 8,985 lbs. (4,076 kg) 9,430 lbs. (4,277 kg) 9,770 lbs. (4,432 kg) N/A 10,585 lbs. (4,801 kg) N/A 10,905 lbs. (4,946 kg) 15,210 lbs. (6,899 kg) 16,280 lbs. (7,384 kg) 16,915 lbs. (7,672 kg) 17,340 lbs. (7,865 kg)
Working Width 20 ft. 6 in. (6.2 m) 24 ft. 6 in. (7.5 m) 28 ft. 6 in. (8.7 m) 30 ft. 6 in. (9.3 m) 30 ft. 6 in. (9.3 m) 32 ft. 6 in. (9.9 m) 34 ft. 6 in. (10.5 m) 38 ft. 6 in. (11.7 m) 42 ft. 6 in. (13.0 m) 46 ft. 6 in. (14.1 m) 50 ft. 6 in. (15.4 m)
Transport Width 16 ft. 0 in. (4.9 m) 15 ft. 6 in. (4.7 m) 15 ft. 1 in. (4.6 m) 15 ft. 1 in. (4.6 m) 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m)
Transport Height 9 ft. 3 in. (2.8 m) 11 ft. 1 in. (3.4 m) 13 ft. 0 in. (4.0 m) 13 ft. 10 in. (4.2 m) 13 ft. 0 in. (4.0 m) 13 ft. 10 in. (4.2 m) 14 ft. 10 in. (4.5 m) 11 ft. 11 in. (3.6 m) 11 ft. 11 in. (3.6 m) 13 ft. 11 in. (4.2 m) 13 ft. 11 in. (4.2 m)
Number of Shanks 41 49 57 61 61 65 69 77 85 93 101
Number of Shanks Per Section 9-23-9 13-23-13 17-23-17 19-23-19 17-27-17 19-27-19 21-27-21 10-15-27-15-10 14-15-27-15-14 14-19-27-19-14 18-19-27-19-18
Shank Type Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks Spring Clamp Shanks or 2-Piece S-Tine Shanks
Shank Size 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm) 0.625 x 1.75 in. (15.9 x 44.5 mm)
Point Load 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg) 190 lbs. (86 kg)
Spring Shank Tower Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components Laser Cut/Matchcut Components
Spring Size Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter Extension Type 0.46875 in. (11.9 mm) Wire Diameter
Shank Spacing 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm) 6 in. (152 mm)
Special Shank Position Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires Rear Shanks Centered on Tires
Sweeps 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount 8 in. (203 mm) with 47 Degree Mount
Under Frame Clearance 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm) 26.5 in. (673 mm)
Frame 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded
Frame Type Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints Truss Type With Wrapped Shank Tube Joints
Transport Lift Axles 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System 4.5 in. (114 m) Axle With Tower Lift System
Walking Tandems Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings Standard With Hardened Connex Bushings
Tire Size - Main Frame (4) 12.5L x 15-12 Ply (4) 12.5L x 15-12 Ply (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F (4) 12.5L x 15, Load F
Wheel Hubs - Main Frame 6-Bolt 6-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt
Spindles - Main Frame 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 3 in. (76.2 mm) Slip-In Spindles 3 in. (76.2 mm) Slip-In Spindles 3 in. (76.2 mm) Slip-In Spindles 3 in. (76.2 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 11L x 15-12 Ply (4) 11L x 15-12 Ply (4) 11L x 15-12 Ply (4) 11L x 15-12 Ply (4) 11L x 15-12 Ply (4) 11L x 15-12 Ply (4) 11L x 15-12 Ply (8) 11L x 15-12 Ply (8) 11L x 15-12 Ply (8) 11L x 15-12 Ply (8) 11L x 15-12 Ply
Wheel Hubs - Wing Frame 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt 6-Bolt
Spindles - Wing Frame 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment Self-Leveling with Manual Adjustment
Hitch Category Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole
Machine Depth Control Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted
Hydraulics 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders 10 in. (254 mm) Stroke Cylinders
Outrigger Gauge Wheels Optional Optional Standard Standard Standard Standard Standard Standard Standard Standard Standard
Safety Warning Lights and SMV Emblem Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Blue Sapphire Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Rear Hitch With Hydraulic Hoses Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Cat. V Single Lip Hitch Clevis (3 in. Hole) N/A N/A N/A N/A N/A N/A N/A Optional Optional Optional Optional
9 in. Sweeps Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
8 in. Ultra Wing Sweeps Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
9 in. Ultra Wing Sweeps Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Attachment Options:
Flexible 5-Row Spike Harrow Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
4-Row Coil Tine Harrow Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
3-Row Spike and Reel Attachment Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
3-Row Tine and Reel Attachment Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Horsepower Requirements 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot 7 to 9 HP (5 to 7 kW) Per Foot

Flexible 5-Row Spike Harrow Attachment

Adapts To: 9630-20 9630-24 9630-28 9630-30NC 9630-30 9630-32 9630-34 9650-38 9650-42 9650-46 9650-50
Approximate Weight 2,215 lbs. (1,005 kg) 2,460 lbs. (1,116 kg) 2,675 lbs. (1,213 kg) 2,789 lbs. (1,265 kg) 2,789 lbs. (1,265 kg) 2,890 lbs. (1,311 kg) 2,991 lbs. (1,357 kg) 3,658 lbs. (1,659 kg) 3,760 lbs. (1,706 kg) 3,925 lbs. (1,780 kg) 4,025 lbs. (1,826 kg)
Teeth 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm)
Teeth Spacing 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm)
Distance Between Bars 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm)
Spike Angle Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment
Harrow Mounting 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section
Section Sizes 6 ft. (1.8 m) -- 10.5 ft. (3.2 m) -- 6 ft. (1.8 m) 7.5 ft. (2.3 m) -- 11.25 ft. (3.4 m) -- 7.5 ft. (2.3 m) 9.75 ft. (3.0 m) -- 10.5 ft. (3.2 m) -- 9.75 ft. (3.0 m) 10.5 ft. (3.2 m) -- 11.25 ft. (3.4 m) -- 10.5 ft. (3.2 m) 9.75 ft. (3.0 m) -- 12.75 ft. (3.9 m) -- 9.75 ft. (3.0 m) 10.5 ft. (3.2 m) -- 12.75 ft. (3.9 m) -- 10.5 ft. (3.2 m) 12 ft. (3.7 m) -- 12.75 ft. (3.9 m) -- 12 ft. (3.7 m) 6 ft. (1.8 m) -- 8.25 ft. (2.5 m) -- 12.75 ft. (3.9 m) -- 8.25 ft. (2.5 m) -- 6 ft. (1.8 m) 7.5 ft. (2.3 m) -- 8.25 ft. (2.5 m) -- 12.75 ft. (3.9 m) -- 8.25 ft. (2.5 m) -- 7.5 ft. (2.3 m) 8.25 ft. (2.5 m) -- 9.75 ft. (3.0 m) -- 12.75 ft. (3.9 m) -- 9.75 ft. (3.0 m) -- 8.25 ft. (2.5 m) 9.75 ft. (3.0 m) -- 9.75 ft. (3.0 m) -- 12.75 ft. (3.9 m) -- 9.75 ft. (3.0 m) -- 9.75 ft. (3.0 m)

4-Row Coil Tine Harrow Attachment

Adapts To: 9630-20 9630-24 9630-28 9630-30NC 9630-30 9630-32 9630-34 9650-38 9650-42 9650-46 9650-50
Approximate Weight 2,017 lbs. (915 kg) 2,182 lbs. (990 kg) 2,347 lbs. (1,065 kg) 2,410 lbs. (1,093 kg) 2,430 lbs. (1,102 kg) 2,520 lbs. (1,143 kg) 2,595 lbs. (1,177 kg) 3,481 lbs. (1,579 kg) 3,646 lbs. (1,654 kg) 3,751 lbs. (1,701 kg) 3,975 lbs. (1,803 kg)
Tines 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm)
Tine Spacing 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm) 2 in. (50.8 mm)
Distance Between Bars 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm)
Tine Adjustment Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments
Harrow Mounting 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section
Section Sizes 7 ft. (2.1 m) -- 9 ft. (2.7 m) -- 7 ft. (2.1 m) 8 ft. (2.4 m) -- 11 ft. (3.4 m) -- 8 ft. (2.4 m) 9 ft. (2.7 m) -- 11 ft. (3.4 m) -- 9 ft. (2.7 m) 11 ft. (3.4 m) -- 11 ft. (3.4 m) -- 11 ft. (3.4 m) 11 ft. (3.4 m) -- 12 ft. (3.7 m) -- 11 ft. (3.4 m) 11 ft. (3.4 m) - 13 ft. (4.0 m) -- 11 ft. (3.4 m) 12 ft. (3.7 m) -- 13 ft. (4.0 m) -- 12 ft. (3.7 m) 7 ft. (2.1 m) -- 8 ft. (2.4 m) -- 12 ft. (3.7 m) -- 8 ft. (2.4 m) -- 7 ft. (2.1 m) 8 ft. (2.4 m) -- 8 ft. (2.4 m) -- 12 ft. (3.7 m) -- 8 ft. (2.4 m) -- 8 ft. (2.4 m) 8 ft. (2.4 m) -- 9 ft. (2.7 m) -- 13 ft. (4.0 m) -- 9 ft. (2.7 m) -- 8 ft. (2.4 m) 9 ft. (2.7 m) -- 11 ft. (3.4 m) -- 13 ft. (4.0 m) -- 11 ft. (3.4 m) -- 9 ft. (2.7 m)

3-Row Spike and Reel Attachment

Adapts To: 9630-20 9630-24 9630-28 9630-30NC 9630-30 9630-32 9630-34 9650-38 9650-42 9650-46 9650-50
Approximate Weight 2,567 lbs. (1,164 kg) 2,742 lbs. (1,244 kg) 2,912 lbs. (1,321 kg) 3,098 lbs. (1,405 kg) 3,098 lbs. (1,405 kg) 3,098 lbs. (1,405 kg) 3,249 lbs. (1,474 kg) 4,382 lbs. (1,988 kg) 4,552 lbs. (1,988 kg) 4,725 lbs. (2,143 kg) 4,895 lbs. (2,220 kg)
Teeth 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm) 0.75 in. x 14 in. (19.1 x 356 mm)
Teeth Spacing 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm) 1.8 in. (45.7 mm)
Distance Between Bars 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm)
Spike Angle Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment 2 Position Adjustment
Reel Diameter 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm)
Reel Bars Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar
Harrow Mounting 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section
Section Sizes 6.25 ft. (1.9 m) -- 8.75 ft. (2.7 m) -- 6.25 ft. (1.9 m) 7.5 ft. (2.3 m) -- 10 ft. (3.0 m) -- 7.5 ft. (2.3 m) 10 ft. (3.0 m) -- 8.75 ft. (2.7 m) -- 10 ft. (3.0 m) 10.5 ft. (3.2 m) -- 11.25 ft. (3.4 m) -- 10.5 ft. (3.2 m) 8.75 ft. (2.7 m) -- 6.25 ft. (1.9 m) -- 6.25 ft. (1.9 m) -- 8.75 ft. (2.7 m) 9.75 ft. (3.0 m) -- 6.25 ft. (1.9 m) -- 7.5 ft. (2.3 m) -- 9.75 ft. (3.0 m) 10 ft. (3.0 m) -- 6.25 ft. (1.9 m) -- 7.5 ft. (2.3 m) -- 10 ft. (3.0 m) 5 ft. (1.5 m) -- 7.5 ft. (2.3 m) -- 6.25 ft. (1.9 m) -- 6.25 ft. (1.9 m) -- 7.5 ft. (2.3 m) -- 5 ft. (1.5 m) 7.5 ft. (2.3 m) -- 6.25 ft. (1.9 m) -- 7.5 ft. (2.3 m) -- 7.5 ft. (2.3 m) -- 6.25 ft. (1.9 m) -- 7.5 ft. (2.3 m) 7.5 ft. (2.3 m) -- 8.75 ft. (2.7 m) -- 6.25 ft. (1.9 m) -- 6.25 ft. (1.9 m) -- 8.75 ft. (2.7 m) -- 7.5 ft. (2.3 m) 8.75 ft. (2.7 m) -- 8.75 ft. (2.7 m) -- 6.25 ft. (1.9 m) -- 7.5 ft. (2.3 m) -- 8.75 ft. (2.7 m) -- 8.75 ft. (1.9 m)

3-Row Tine and Reel Attachment

Adapts To: 9630-20 9630-24 9630-28 9630-30NC 9630-30 9630-32 9630-34
Approximate Weight 3,150 lbs. (1,429 kg) 3,468 lbs. (1,573 kg) 3,745 lbs. (1,699 kg) 3,895 lbs. (1,767 kg) 3,895 lbs. (1,767 kg) 3,895 lbs. (1,767 kg) 4,195 lbs. (1,903 kg)
Tines 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm) 0.4375 in. x 18 in. (11.1 x 457 mm)
Tine Spacing 2.67 in. (67.8 mm) 2.67 in. (67.8 mm) 2.67 in. (67.8 mm) 2.67 in. (67.8 mm) 2.67 in. (67.8 mm) 2.67 in. (67.8 mm) 2.67 in. (67.8 mm)
Distance Between Bars 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm) 14 in. (356 mm)
Tine Adjustment Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments Multiple Angle Adjustments
Reel Diameter 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm)
Reel Bars Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar Round Bar
Harrow Mounting 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section 2 Support Arms Per Section
Section Sizes 6.25 ft. (1.9 m) -- 8.75 ft. (2.7 m) -- 6.25 ft. (1.9 m) 7.5 ft. (2.3 m) -- 10 ft. (3.0 m) -- 7.5 ft. (2.3 m) 10 ft. (3.0 m) -- 8.75 ft. (2.7 m) -- 10 ft. (3.0 m) 10.5 ft. (3.2 m) -- 10.5 ft. (3.2 m) -- 10.5 ft. (3.2 m) 8.75 ft. (2.7 m) - 6.25 ft. (1.9 m) - 6.25 ft. (1.9 m) -- 8.75 ft. (2.7 m) 8.75 ft. (2.7 m) -- 6.25 ft. (1.9 m) - 7.5 ft. (2.3 m) - 8.75 ft. (2.7 m) 10 ft. (3.0 m) -- 6.25 ft. (1.9 m) -- 7.5 ft. (2.3 m) -- 10 ft. (3.0 m)

Specifications subject to change without notice.

Videos

Literature

Downloadable Literature

9600 Field Cultivator

9600 Field Cultivator (Printable Version)

Request Printed Literature

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.

Note: To request literature for multiple products, visit our Literature Request page.


 

Captcha Code

Click the image to see another captcha.
 

Manuals

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for Three-Section Folding Field Cultivator models.

This manual contains repair part listings for Three-Section Folding Field Cultivator models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for Five-Section Folding Field Cultivator models.

This manual contains repair part listings for Five-Section Folding Field Cultivator models.

To view manuals for previous versions of this or a different product line, click here.

Home > Products > Farm Equipment > Landoll Farm Equipment > 9600 Field Cultivator