B30AC/B40AC Multipurpose Narrow Aisle Articulating Electric Forklift
Bendi Rear Wheel Drive Narrow Aisle Multipurpose Electric Forklift
The Bendi model B30AC/B40AC works in aisles as narrow as *78" (1.98M), has a basic capacity starting at 3,000 lbs. (1361 kg) at 24" (600mm) load center and has lift heights available to 26' (7.92M).
The Bendi B30AC/B40AC is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available making this unit excellent for loading/unloading trailers and containers. The B30AC/B40AC can also work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B30AC/B40AC does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.
Exceptional Performance and Maneuverability
Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B30AC/B40AC provides exceptional control and makes load placement and retrieval superior to the competition.
Maximizes Material Handling Productivity
The versatile Bendi B30AC/B40AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, yet operates in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B30AC/B40AC has large diameter tires and the truck has great underclearance for avoiding floor obstructions. This forklift can go from inside the truck to the rack eliminating staging and additional operators and support forklifts.
*Based on 48” (1200 mm) long x 40” (1000 mm) wide load.
Exceptional Design and Engineering
- 3,000 lb. (1361kg) and 4,000 lb. (1814kg) Capacity at 24" (600mm) Load Center
- Four-Wheel Design, Dual Rear Wheel Drive Provides Excellent Power, Braking and Traction
- Ergonomic Design for Exceptional Operator Comfort and Safety
- Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
- DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
- Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
- High Visibility Mast Allows Optimum Safety and Control
- AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
- High Efficiency Curtis AC Controllers Provide Trouble Free Operation
- Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
- 48 Volt Electrical System
- Optional Cold Storage Conditioned to -22°F (-30°C)
The specifications contained on this page are subject to change at any time without notice. Actual dimensions and performance data given herein may vary due to manufacturing tolerances.
|Capacity||lbs/kg||3000 / 1361||4000 / 1814|
|Load Center||in/mm||24 / 600||24 / 600|
|Power Source||48 Volt Battery||48 Volt Battery|
|Weight with Battery||lbs/kg||12800 / 5818||13,770 / 6,259|
|Travel Speed||Loaded||mph/kph||6.5 / 10.5||6.5 / 10.5|
|Unloaded||mph/kph||7 / 11.3||7 / 11.3|
|Lift Speed||Loaded||fpm/mpm||90 / 27.4||90 / 27.4|
|Unloaded||fpm/mpm||110 / 33.5||110 / 33.5|
|Lowering Speed||Loaded||fpm/mpm||100 / 30.4||100 / 30.4|
|Unloaded||fpm/mpm||90 / 27.4||90 / 27.4|
|Mast Tilt||Up to 293"||RWD/FWD||degrees||3 / 3||3 / 3|
|Up to 294" and Higher||RWD/FWD||degrees||2 / 1||2 / 1|
|Lost Load Center||E||in/cm||12 / 30.5||12 / 30.5|
|Wheelbase||F||in/cm||63 / 160||63 / 160|
|Rear Overhang||G||in/cm||25 / 64||28 / 71|
|Overall Length to Face of Forks||H||Mast Vertical||in/cm||100 / 254||103 / 262|
|Underclearance||I||Under Mast||in/cm||3 / 7.6||3 / 7.6|
|Operator Floor Height||J||in/cm||31 / 79||31 / 79|
|Overhead Guard Height||K||in/cm||89 / 226||89 / 226|
|Overhead Guard Width||L||in/cm||40 / 102||40 / 102|
|Overall Width||M||in/cm||43 / 109||48 / 122|
|Fork Carriage Width||N||in/cm||41 / 104||41 / 104|
|Fork Length||O||in/cm||40 / 102||40 / 102|
|Fork Spread||P||Min / Max||in/cm||9.4-39.5 / 24-100||9.4-39.5 / 24-100|
|Battery Compartment Height||Q||Floor to Top of Battery Tray||in/cm||19 / 48||19 / 48|
|Right Angle Stacking Aisle||with 48"Lx40"W (1200mmx1000mm) Load||in/cm||78 / 198||78 / 198|
|Intersecting Aisle||with 48"Lx40"W (1200mmx1000mm) Load||in/cm||108 / 274||108 / 274|
|Hydraulic Motor Rating||Continuous Duty||kWh||12||12|
|Drive Motor Rating||Continuous Duty||kWh||5.1ea / 10.2 Total||5.6ea / 11.2 Total|
|Traction Control Type||Curtis||AC||AC|
|Hydraulic Control Type||Curtis||AC||AC|
|Wheel Size||Front 2each Smooth Poly-Dia x Face||in/cm||14x5 / 35.6x12.7||14x5 / 35.6x12.7|
|Wheel Size||Rear 2each Smooth Rubber-Dia x Face||in/cm||18x7 / 45.7x17.8||18x7 / 45.7x17.8|
Specifications subject to change without notice.
Downloadable Product Literature
Request Printed Literature
If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.
Choose A Forklift
Call Us: (800) 428-5655 or (785) 562-5381
Email Us: firstname.lastname@example.org