Landoll Corporation

Search the Site  

Home > Products > Forklifts > Bendi Forklifts > B40AC-DR/B50AC-DR

B40AC-DR B50AC-DR Bendi Electric Deep Reach Forklift

Description

BENDI REAR WHEEL DRIVE NARROW AISLE DEEP REACH MULTIPURPOSE ELECTRIC FORKLIFT

The Bendi model B40AC-DR / B50AC-DR will stack loads two deep in aisles as narrow as *96” (2.4 M) has a basic starting capacity of 2,500 lbs. (1,136 kg) at 24” (600 mm) load center and has lift heights available to 35' 5" (10.80 M).  The reach from face to mast is 52” (1,321 mm) and the integral pantograph reach stroke is 41” (1,041 mm) The B40AC-DR / B50AC-DR has a 33” (838 mm) wide tilting and side shifting fork carriage.

The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires.  The B40AC-DR / B50AC-DR can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.


EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-DR / B50AC-DR provides exceptional control and makes load placement and retrieval superior to the competition.


3-STAGE MAST

The new mast has a rigid mounting and as standard a tilting and side shifting carriage.  The new design offers increased mast rigidity, capacity and improved visibility.  Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast.   Lowered heights have been reduced and a new mounting position on the 48” (1,219 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.  Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available. 

*Based on 48” (1200mm) long x 40” (1000mm) wide load.  


Features

Features

  • 2,500 lb. (1,136kg) and 3,000 lb. (1,364kg) Capacity at 24" (600mm) Load Center
  • Four-Wheel Design, Dual Rear Wheel Drive
  • Integral 8" (200mm) Stroke Sideshifter and 36" (914mm) High Load Backrest
  • Hydraulic Power Steering - Front Wheel Steer
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators

State-of-the-art

  • AC Traction and Hydraulic Motors Ensure Minimal Maintenace and High Efficiency
  • High Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 48 Volt Electrical System
  • Optional Cold Storage Conditioned to -22°F (-30°C)


The specifications contained on this page are subject to change at any time without notice. Actual dimensions and performance data given herein may vary due to manufacturing tolerances.


Specs

Specification Dimension State U/M B40AC-DR B50AC-DR
Capacity lbs/kg 2,500 / 1,136 3,000 / 1,364
Load Center in/mm 24 / 600 24 / 600
Power Source Battery, Electric Battery, Electric
Weight with Battery lbs/kg 14,270 / 6,486 17,350 / 7,886
Travel Speed Loaded mph/kph 6.5 / 10.5 6.5 / 10.5
Unloaded mph/kph 7 / 11.3 7 / 11.3
Lift Speed Loaded fpm/mpm 90 / 27.4 90 / 27.4
Unloaded fpm/mpm 110 / 33.4 110 / 33.4
Lowering Speed Loaded fpm/mpm 100 / 30.5 100 / 30.5
Unloaded fpm/mpm 90 / 27.4 90 / 27.4
Carriage Tilt Up to 293" FWD/Back degrees 3/ 4 3/ 4
Lost Load Center E in/mm 21 /533.4 21 /533.4
Lost Load Center Extended E* in/mm 61/1,549.4 61/1,549.4
Wheelbase F in/mm 72.6 / 1,844 72.6 / 1,844
Rear Overhang G in/mm 28.6 / 726 31.6 / 803
Overall Length to Face of Forks H in/mm 122.2 / 3,103.9 125.2/3,180
Underclearance I Under Mast in/mm 3 / 76 3 / 76
Cab Floor Height J in/mm 31.3 / 795 31.3 / 795
Seat Height K in/mm 52 / 1,321 52 / 1,321
Overhead Guard Height K in/mm 89 / 2,261 89 / 2,261
Chassis Width M in/mm 50 / 1,270 54 / 1,372
Fork Length O in/mm 40 / 1,016 40 / 1,016
Battery Compartment Height Q Floor to Top of Battery Tray in/mm 19.24 / 489 19.24 / 489
Front Articulation P deg 180 180
Front Axle Width with 48"Lx40"W (1200mmx1000mm) Load in/mm 48 / 1,219.2 48 / 1,219.2
Gradeability Loaded % 15 15
Gradeability Unloaded % 15 15
Hydraulic Motor Rating Continuous Duty kWh 12 12
Drive Motor Rating Continuous Duty kWh 5.6ea / 11.2 Total 7.5ea / 15 Total
Traction Control Type Curtis AC AC
Hydraulic Control Type Curtis AC AC
Wheel Size Front 1each Smooth Poly-Dia x Face in/mm 14x5 / 356x127 15x6 / 381x152
Wheel Size Rear 2each Smooth Rubber-Dia x Face in/cm 18x7 / 457x178 18x9 / 457x229
Loading images...

Videos

Literature

Downloadable Literature

Bendi B40AC-DR / B50AC-DR Product Brochure

Bendi B40AC-DR / B40AC-DR Product Brochure (Printer Friendly)

Request Printed Literature

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.

Note: To request literature for multiple products, visit our Literature Request page.