Landoll Corporation

Search the Site  

Home > Products > Forklifts > Bendi Forklifts > B55AC

B55AC Multi-Purpose Articulating Electric Forklift

Description

Bendi Rear Wheel Drive High Capacity, High Lift Narrow Aisle Multipurpose Electric Articulating Forklift

The Bendi model B55AC works in aisles as narrow as *84" (2.13M). The B55AC high volume model has a basic capacity of 5,500 lbs. (2495kg) at 24" (600mm) load center and has lift heights available to 30' (9.14M).

The B55AC model is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available. The B55AC can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles. 

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B55AC provides exceptional control and makes load placement and retrieval superior to the competition.

Maximizes Material Handling Productivity

The versatile Bendi B55AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B55AC has large diameter tires and the truck has great underclearance for avoiding floor obstructions. One truck can go from inside the dock to the rack, eliminating staging and additional operators and support forklifts. 

*Based on 48” (1200mm) long x 40” (1000mm) wide load.  

Features

 Exceptional Design and Engineering

  • B55AC 5,500 lb. (2495kg) Capacity at 24" (600mm) Load Center
  • Four-Wheel Design, Dual Rear Wheel Drive Provides Excellent Power, Braking and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
  • DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • High Visibility Mast Allows Optimum Safety and Control

State-of-the-Art Electronics

  • AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 48 Volt Electrical System
  • Optional Cold Storage Conditioned to -22°F (-30°C)

The specifications contained on this page are subject to change at any time without notice. Actual dimensions and performance data given herein may vary due to manufacturing tolerances.

 

 

Specs

Specification Dimension State U/M B55AC
Capacity lbs/kg 5500 / 2495
Load Center in/mm 24 / 600
Power Source 48 Volt Battery
Weight with Battery lbs/kg 16950 / 7705
Travel Speed Loaded mph/kph 6.5 / 10.5
Unloaded mph/kph 7 / 11.3
Lift Speed Loaded fpm/mpm 90 / 27.4
Unloaded fpm/mpm 110 / 33.4
Lowering Speed Loaded fpm/mpm 100 / 30.5
Unloaded fpm/mpm 90 / 27.4
Mast Tilt FWD/RWD (up to 293") degrees 3/3
FWD/RWD(294" to 360") degrees 1/2
Carriage Tilt FWD/RWD degrees N/A
Lost Load Center E in/cm 12 / 310
Wheelbase F in/cm 69 / 175
Rear Overhang G in/cm 31.7 / 81
Overall Length to Face of Forks H in/cm 113 / 287
Underclearance I in/cm 3 / 7.6
Floor Height J in/cm 31 / 79
Overhead Guard Height K in/cm 89 / 226
Overhead Guard Width L in/cm 46 / 117
Chassis Width M in/cm 56 / 142
Fork Carriage Width N in/cm 41 / 104
Fork Length O in/cm 40 / 101
Battery Compartment Height Q Floor to Top of Battery Tray in/cm 19 / 48
Right Angle Stacking Aisle 48-in.L x 40-in.W (122 x 102cm) in/cm 84 / 213
Intersecting Aisle 48-in.L x 40-in.W (122 x 102cm) in/cm 114 / 289
Gradeability Loaded % 15
Gradeability Unloaded % 15
Hydraulic Motor Rating Continuous Duty Rating type / kWh AC / 16.8
Traction Motor Rating Continuous Duty Rating type / kWh AC / 7.5 ea. - 15 Total
Traction Controller AC
Hydraulic Controller AC
Wheel Size Front(2each Poly) Dia. x Face in/cm 14x8 / 36x20
Wheel Size Rear(2each Rubber)Dia. x Face in/cm 18x9 / 46x23

Specifications subject to change without notice.

Videos

Literature

CLICK HERE to REQUEST LITERATURE on Multiple Products

View Literature

Bendi B55AC

Bendi B55AC Product Brochure (Printer Friendly)

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.


 
 
Home > Products > Forklifts > Bendi Forklifts > B55AC