Landoll Corporation

Search the Site  

Home > Products > Forklifts > Drexel Forklifts > SL60 / SL80

SL60/80 VNA SWINGMAST®

Description

Drexel SwingMast® Front Wheel Drive, Rear Wheel Steer VNA and Side Loading Forklift

The Drexel model SL60SE and SL80SE are high capacity SwingMast® models that work in aisles as narrow as 66" (1.7M), have a basic capacity of 6,000 lbs. (2722kg), and up to 8,000 lbs. (3629kg) at 24" (600mm) load center and have lift heights available to 289” (7.34M).  

The SL60SE and SL80SE are 4-Wheel SwingMast® VNA and Side Loading forklifts with independently driven front wheels and dual rear steer tires. The front mast rotates 90°, has side shift of 30” (762mm), allows easy stacking in Very Narrow Aisles. Both can work inside and outside on paved surfaces and can perform the jobs of high capacity front loading and side loading forklifts including working in bulk storage, cantilever rack, push-back rack, double deep and climbing steep ramps. The SL range does the jobs of reach and counterbalanced trucks in aisles over 40% smaller. The ability to store and transport heavy long loads as a side loader increases versatility and maximizes utilization.      

Exceptional Performance and Maneuverability

The SL60SE and SL80SE's fast lift/lower and travel speeds with tight turning radius provide excellent maneuverability and productivity. The optional roll-out battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four stage masts are available for a wide range of applications including those with low overhead obstructions requiring high lift heights. Wire Guidance is a standard option on this model allowing safe, full-speed travel in the narrowest aisles.  

Maximizes Material Handling Productivity

The versatile SL60SE and SL80SE forklifts replace conventional reach and counterbalanced fork trucks in standard warehouse pallet-handling operations. The unique design allows operators to use it as a counterbalance truck indoors or out, operates in very narrow aisles in the warehouse, and replace reach and counterbalanced trucks that require much wider aisles. The operator’s compartment is offset providing a wide, long load-carrying side deck to be used as side loaders. The front tires are 20" (500mm) diameter and the rear/steer tires are 16.5” (419mm) dia. providing great underclearance for avoiding floor obstructions. The rear steer axle is articulated to provide a smooth ride over rough floor conditions. 

*Based on 48” (1200mm) long x 40” (1000mm) wide load

Features

 Exceptional Design and Engineering

  • 6,000 lb. (2722kg) and 8,000 lb. (3629kg) Capacities at 24" (600mm) Load Center
  • Four-Wheel Design, Independently Driven Front Drive Wheels and Dual Rear Steering Wheels Provide Excellent Maneuverability and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Dual Joysticks Control all Hydraulic Functions
  • Hydrostatic Power Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Adjustable Suspension Seat Improves Operator Comfort
  • Large Battery Compartment Allows Maximum Battery Capacity for Long Run Times
  • High Visibility Mast Allows Optimum Safety and View of Loads and Forks

State-of-the-Art Electronics

  • SEPEX Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High Efficiency Curtis SEPEX Controllers Provide Trouble-Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 72 Volt Electrical System

 

 The specifications contained on this page are subject to change at any time without notice. Actual dimensions and performance data given herein may vary due to manufacturing tolerances.


Specs

Specification Dimension State U/M SL60 SL80
Capacity lbs/kg 6000 / 2722 8000 / 3629
Load Center in/mm 24 / 600 24 / 600
Power Source Battery, electric Battery, electric
Weight with Battery lbs/kg 18700 / 8500 20900 / 9500
Travel Speed Loaded mph/kph 6.9 / 11.1 6.9 / 11.1
Unloaded mph/kph 7.7 / 12.3 7.7 / 12.3
Lift Speed Loaded fpm/mpm 55 / 16.7 55 / 16.7
Unloaded fpm/mpm 70 / 21.3 70 / 21.3
Lowering Speed Loaded fpm/mpm 95 / 28.9 95 / 28.9
Unloaded fpm/mpm 60 / 18.2 60 / 18.2
Mast Tilt FWD/RWD degrees 3 / 4 3 / 4
Lost Load Center A **with Triple Mast** in/mm 24 / 607 24 / 607
Wheelbase B in/mm 56 / 1422 56 / 1422
Overall Length to Face of Forks C **with Triple Mast** in/mm 105 / 2667 109 / 2769
Underclearance D in/mm 4 / 102 4 / 102
Cab Floor Height E in/mm 32 / 889 32 / 889
Seat Height F in/mm 52 / 1321 52 / 1321
Overhead Guard Height G in/mm 90 / 2286 90 / 2286
Chassis Width H in/mm 52 / 1321 56 / 1422
Mast Shift I in/mm 30 / 762 30 / 762
Side Reach J in/mm 3 / 76 3 / 76
Side Deck Height K in/mm 52 / 1321 52 / 1321
SIde Deck Width L in/mm 24 / 610 27 / 686
Fork Carriage Width M in/mm 41 / 1041 41 / 1041
Turning Radius N in/mm 93.5 / 2375 96.5 / 2451
Fork Length in/mm 40 / 1016 40 / 1016
Gradeability Loaded % 15 15
Lift Motor Rating kW 17.6 17.6
Steer Motor Rating kW 6.5 6.5
Drive Motor Rating 2 each kW 7.5x2 7.5x2
Wheel Sizes Front (2 each) in/mm 20x9 / 508x229 20x9 / 508x229
Wheel SIzes Rear (2 each) in/mm 16.25x7 / 413x178 16.25x7 / 413x178
Battery Recommended Electric 72 volt kWh 53-55 53-55
Minimum Battery Weight lbs/kg 4300 / 1955 4300 / 1955
Control Type Traction, dual Separately Excited Separately Excited
Control Type Hydraulic Series Series
Loading images...

Literature

CLICK HERE to REQUEST LITERATURE on Multiple Products

View Literature

Drexel SL60

Drexel SL60 Product Brochure (printer friendly)

Drexel SL80

Drexel SL80 Product Brochure (printer friendly)

Request Printed Literature

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.


 
 
Home > Products > Forklifts > Drexel Forklifts > SL60 / SL80