Landoll Corporation

Search the Site  

Home > Products > Trailers > Detachable Trailers > Model 845E-HD-AG

Detachable Model 845E-HD-AG

Description

HAUL MORE WITH LANDOLL HAULOLL DETACHABLES

The new 845E-AG Hauloll is designed to move today and tomorrow’s heaviest equipment.  The 845E-HD-AG’s 45-ton capacity is matched to handle even the heaviest of the field-ready tractors and choppers in production today.  The heavy haul requirement was carefully considered during the product development of the 845E-AG resulting in a trailer that comes standard with a Heavy Duty Gooseneck with provisions for a 36” Flip extension. 

BUILT FOR THE HEAVY HAUL – AG, CONSTRUCTION, FORKLIFTS AND MORE

The 845E-HD-AG capacity comes in at 45 tons (90,000 lbs within 16’ and 80,000 lbs. within 12’) and a 19-1/4” loaded deck height keeps the center of gravity lower than most detachables.  This trailer is built with Heavy Haul aluminum pullouts that are 30% stronger than the 835 pullouts and extend out to 13’ wide on 6” increments.  Pulled out to the proper width and planked, these overwidths are designed to handle big wheel loader and some track equipment.  Enlarged lift cylinders with a 150,000 lb. lift capacity,  and gooseneck flip brackets for 36” flip over extension round out the heavy haul features on the 845E-HD-AG.  The heavy haul load carrier allows the driver to match the needed ground clearance in one of the 7-ride height positions to choose from. 

RAISING THE BAR ON GVWR

Most 2 axle base trailers run out of GVWR to legally permit many heavier loads.  The Landoll 845E HD AG tops out at 116,500 lbs. / 51,076 KG GVWR allowing for a full 90,000 lbs. of payload.  The trailer equipped with the gooseneck extension and the third flip axle will scale even the toughest AG tractors.   Now as always each state DOT will control the exact weighs you can transport on their individual highways.

 

REGEN-HOSS HYDRAULICS

Not only is the 845E-HD-AG built for heavy haul Ag, it comes standard with REGEN-HOSS hydraulics, the new hydraulic -regeneration valve system with Rexroth valve rated at 2500 PSI and 20GPM.  That is a significant increase in hydraulic speed, decreasing the amount of time it takes to load equipment.

Features

STANDARD EQUIPMENT

FRAME and FEATURES:

  • Capacity: 45 Tons (90,000 lbs.)
  • Dual Deck Rating: 90,000 lbs. in 16'
  • Estimated Base Weight: 21,800 lbs. (845-48HD) +/- 3%
  • Main Frame: Fabricated 13" Beam, 100,000 PSI Yield Flanges
  • Deck Width: 102"
  • Loaded Deck Height: 19-1/4"
  • Loaded Ground Clearance: 7"
  • Decking: 1-1/2" Nominal, Apitong Full Width
  • Crossmembers: 6" x 3" High Tensile Strength Tubing on 18" Centers
  • Hitch: Patented Automatic Gooseneck Lock Engagement
  • Gooseneck: 12' Heavy Duty (Includes Flip Brackets)
  • Pin Setting: 15"
  • Swing Clearance: 84"
  • Side Extension: 27" Aluminum Telescoping Side Extensions (Lower Deck)
  • Accessories: 845E-HD-AG 48' and 53' Frame Prepared with Flip Bkts, Electric and Air for 3rd Axle Flip, Includes Frame Prep in Rear Trunnion Bumper for Hyd Flip Option.  845E-53HD AG S60 Has No Provision for a Flip Axle.
  • Tool Box: None Standard 
  • Gooseneck Tie Downs: D-Rings: (2) Each at Front Corner; (2) Each at Back 
  • Lower Deck Tie Downs: Side Mounted D-Rings on 36" Centers 
  • Rear Trunnion Tie Downs: D-Rings: (2) Each at Base Flush Mounted on Top of Inner Beams; (2) Each Web Mounted on Top; (2) Each Rear Flush Mounted on Top of Inner Beams; (2) Each Top of Slope (Outer Web) 

SUSPENSION and UNDERCARRIAGE:

  • Suspension: Neway Air Ride, 25,000 lb. Capacity
  • Grease: Centralized Grease System
  • Axles: (2) 25,000 lb. Axles, Dual Tire, Oil Bath Bearings, Automatic Slack Adjusters
  • Brakes: 16.5 x 7 Full Air / Spring Brakes, ABS, 4S2M
  • Tires: 255/70R 22.5 LRH
  • Rims: 22.5 x 8.25 Steel
  • Wheels: Hub Pilot / Steel Outboard Hubs
  • Oil Seal Hubs: Internal Mated Assembly

HYDRAULICS:

  • Hydraulic Hook Up: Quick Couplers / 2,500 PSI - 20 GPM at Controls, 50 GPM Max
  • Cylinders: Gooseneck Cylinders Horizontally Mounted

ELECTRICAL:

  • Air/Electrical: 7 Way Receptacle
  • Lights: Grote Clear Lens LED with Chrome Bezel (10-Year Warranty)
  • Wiring Harness: Grote “Xtreme” Wiring Harness (7-Year Warranty)

FINISH and COLOR:

  • Finish: Steel Grit Shot Blast to Bright Metal
  • Powder Coat Color: TGIC Polyester Powder Coat, White / Black / Yellow / Blue / Red / Green / Dark Gray / Sapphire Blue 
  • Decals:  Hi-Visibility Reflective Package

Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice. 




Options

OPTIONAL EQUIPMENT

GOOSENECK:

  • Removable Aluminum Upper Deck (P/N 171909) - Full Width for 12' Gooseneck (124"L x 102"W) 10,000 lb. Capacity
  • Weld On Steel Deck with Rub / Chain Rail 
  • 20,000 lb Warn Planetary Winch, 2 Speed with Air Release (Wet Kit Only)
  • 30,000 lb Warn Planetary Winch, 2 Speed with Air Release (Wet Kit Only)
  • Bolt-On Chain and Binder Rack Between Lock Arms  
  • Gooseneck Mud Flaps
  • Wireless Remote Control for Winch  
  • Bolt-On Lockable Tool Box (Curb Side) (14"W x 22.5"D x 24"H) 
  • Heavy Duty Gooseneck in Lieu of Standard (Includes Flip Brackets)
  • 36" Front Flip Extension for Heavy Duty Gooseneck Only (119" Swing Clearance)
  • Gooseneck LED Lights (2 Stop / Turn / Tail and 1 White Work Light per Side)  
  • Liquid Filled (Oil) Weight Pressure Gauge Located by Control Panel 

DECK AND ACCESSORIES:

  • Aluminum Ladder Ramp Assy 70" Long, (One Pair, P/N 125836) "Lower Deck to Rear Trunnion" (For Trailer Built After 11/2003) 9,000 lb Capacity (4,500 Each)
  • Adjustable Aluminum Ladder Ramp with Rod Bracket, Full Width (P/N 148786 and 110527 for 102” Wide Trailers)
  • Adjustable Aluminum Ladder Ramp with Rod Bracket, Full Width (P/N 164814 and 110527 for 120” Wide Trailer
  • Adjustable Aluminum Ladder Ramp with Rod Bracket, Track Area Only (P/N 182056 and 110527 for 102” Wide Trailers with Weight Cut-Out)
  • Adjustable Aluminum Ladder Ramp with Rod Bracket, Track Area Only (P/N 192387 and 110527 for 120” Wide Trailers with Weight Cut-Out)
  • Flush Mounted “Angled” D-Ring (Each)  
  • Recessed Mounted D-Rings
  • 3/8 x 3-1/2 Double Keyhole Strap Full Length Lower Deck on Each Side
  • Aluminum Filler for Front Pullout (Recommended When Loading Track Units)
  • Arctic Hose Package

TRUNNION: (102” Wide Trailers)

  • Removable Aluminum Rear Deck (P/N 105190) (73"L X 102"W) 10,000 lb. Capacity (For 845AG-48 and 845AG-53 Standard 2 Axle Only)
  • Weld On Steel Frame Wood Deck with Rub / Chain Rail (2 Axles Only)
  • Weight Cut Out Package for Wood Deck (Includes Cutout Base Cover)
  • Weight Cut Out Package for Aluminum Deck (Includes Cutout Base Cover)
  • Flip Third Axle Assembly 60” Spread
  • Aluminum Deck for Flip Axle Assembly
  • Hydraulic Flip for Flip Axle Assembly
  • Wheel Well Cover, Steel (Weld On) (2 Axle)
  • Boom Trough Cover (1/4" Steel Tread Plate) (2 Axles)
  • Poly Fenders for Trunnion (2 Axle)
  • Poly Fenders for Flip
  • Slope Cover Assy (P/N 135811) (Non-Weight Bearing) with 2 Access Holes for Tie Down D-Rings
  • Traction Bars for Trunnion Slope (Track Area)

Model 845E-53HD-AG-S6010’ (120”) WIDE MAIN DECK AND TRUNNION:

  • 10' Wide Main Deck and Trunnion in Lieu of Standard (2 Axle Frame, 26' Deck, 60" Spread and 3 Axle Frame) 
  • Removable Aluminum Rear Deck (145”L X 120”W) 10,000 lb. Capacity (For 845AG 3 Axle-S60)
  • Weight Cut Out Package for Wood Deck (Includes Cutout Base Cover)
  • Weight Cut Out Package for Aluminum Deck (Includes Cutout Base Cover)
  • Weld On Steel Frame Wood Deck with Rub / Chain Rail 3 Axle 10’ Wide 60” Spread 
  • Aluminum Deck for Flip Axle Assembly (10' Wide)
  • Weld On Steel Frame Wood Deck with Rub / Chain Rail for Flip Axle Assembly (10’ Wide)
  • Slope Cover Assembly (P/N 180910) (Non-Weight Bearing) with 2 Access Holes for Tie Down D-Rings for 10’ Wide
  • Traction Bars for Trunnion Slope for 10’ Wide (Track Area)

ACCESSORIES:

  • Flag and Banner Package (6 Flags & 2 Overwidth Banners)
  • Magnetic LED Amber Warning Lights (360° Flashing, Battery Powered)
  • Strobing Light Package in Bumper (Each) One Required for Frame, One Required for Flip
  • Four Corner Light Package (Attaches to Pull Out)
  • Battery Back-Up for Strobe Lights (Used when Gooseneck Detached)

SUSPENSION:

  • Air Weigh Digital Scale System LoadMaxx (Trailer Only)
  • LoadMaxx ComLink Cable Kit (Cable Connects Trailer Unit to Tractor Scale)  
  • Air Raise and Lower Valve
  • Air Lift / Retract per Axle

HYDRAULIC POWER SOURCE:

  • Wet Kit for Tractor (Includes 30 Gallon Steel Tank)  
         -Shipped Loose with Trailer   
         -Factory Installed
  • Hydraulic Quick Couplers 1 Male / 1 Female (Matches Trailer) (P/N 105902)
  • Polished Aluminum Hydraulic Tank (19"W x 24D") (Side Mount) in Lieu of Standard
  • 13 H.P. Honda Engine Package Gooseneck Mounted with Cover (Net 10.2 HP)
  • Hydraulic Engine Package - Gooseneck Mounted with Cover 25HP EFI Kohler Gas Includes Mounting Kit (P/N 178434 for Standard 835) (P/N 136578 for 835HD)

TIRES AND RIMS:

  • 255/70R 22.5 Continental Tires in Lieu of Standard
  • 255/70R 22.5 Michelin Tires in Lieu of Standard
  • Spare 255/70R 22.5 Double Coin Tire and Hub Pilot Type Rim
  • Spare 255/70R 22.5 Continental Tire and Hub Pilot Type Rim
  • Spare 255/70R 22.5 Michelin Tire and Hub Pilot Type Rim
  • 22.5 Aluminum Wheel (10-Bolt Polished) in Lieu of Standard (Each)
  • 22.5 Aluminum Wheel (10-Bolt Machined) in Lieu of Standard  (Each)
  • 22.5 Aluminum Wheel (10-Bolt Dura-Brite) in Lieu of Standard (Each)
  • Hubometer
  • Crossfire Air Equalizers (Price per Axle)
  • Pressure Guard Tire Inflation (Price per Axle) N/A
  • Meritor Tire Inflation / PSI (Price per Axle)
  • Shock Straps (Price per Axle)
  • Dust Shields (Price per Axle)

SPECIAL PRICES:

  • Hot Dip Galvanizing (Lower Deck and Trunnion) G/N Powder Coated Only
  • Hot Dip Galvanizing of Flip Axle  Assembly
  • Paint over Galvanizing - Sides Only of Lower Deck and Trunnion Slope with Standard Colors Only


Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice. 

Specs

MODEL CAPACITY BASE WEIGHT DECK WIDTH AXLES TIRES & PLY RATING
845E-48HD-AG 45 Ton 21,800 lbs. 26'6" 102" 2 (8) 255/70R 22.5 LRH
845E-53HD-AG 45 Ton 23,000 lbs. 31'8" 102" 2 (8) 255/70R 22.5 LRH
845E-53HD-AG-S60 45 Ton 25'8" 102" 3 (12) 255/70R22.5 LRH

Drawing

Loading images...

Line Drawing

845E-HD-AG Line Drawing

Literature

View Literature

Detachable 835E / 835E-HD / 845E-HD-AG 

Detachable 835E / 835E-HD / 845E-HD-AG Printable

Request Printed Literature

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.

Note: To request literature for multiple products, visit our Literature Request page.