Landoll Corporation

Search the Site  

Home > Products > Icon > 800 Series Scraper > 800 Series Scraper Compare Models

800 Series Scrapers Compare Models

Manufacturer ICON ICON Ashland Deere Deere
Machine Classification 800 Series Scraper 800 Series Scraper Direct Mount Scraper Direct Mount Scraper Direct Mount Scraper
Model 819 Single 821 Single I-200 TS4 1814E 2112E
Approximate Weight 28,000 lbs. (12,701 kg) 28,900 lbs. (13,109 kg) 25,225 lbs. (11,442 kg) 25,800 lbs. (11,703 kg) 27,200 lbs. (12,338 kg)
Horsepower Requirement 300 HP (224 kW) Minimum, 600 HP (447 kW) Maximum 300 HP (224 kW) Minimum, 600 HP (447 kW) Maximum 325 - 450 HP (242 - 336 kW) 360 - 575 HP (268 - 429 kW) 450 - 575 HP (336 - 429 kW)
Capacity - Heaped 19 yards (14.5 mᵌ) 21 yards (16.0 mᵌ) 20 yards (15.3 mᵌ) 18 yards (13.8 mᵌ) 21 yards (16.0 mᵌ)
Capacity - Struck 17.3 yards (13.2 mᵌ) 18.4 yards (14.1 mᵌ) 15.9 yards (12.2 mᵌ) 13.2 yards (10.1 mᵌ) 15 yards (11.5 mᵌ)
Cutting Width 10 ft. 0 in. (3.0 m) 11 ft. 0 in. (3.4 m) 10 ft. 6 in. (3.2 m) 14 ft. 6 in. (4.4 m) 12 ft. 0 in. (3.7 m)
Cutting Edge Replaceable Replaceable Multi-Piece Center Frost Bit with Corner Edges Multi-Piece Straight Blade Multi-Piece Straight Blade
Transport Width 10 ft. 11. in. (3.3 m) 11 ft. 11 in. (3.6 m) 11 ft. 11 in. (3.6 m) 15 ft. 11 in. (4.9 m) 13 ft. 5 in. (4.1 m)
Transport Height 9 ft. 1 in. (2.8 m) 9 ft. 1 in. (2.8 m) 8 ft. 2 in. (2.5 m) 6 ft. 7 in. (2.0 m) 7 ft. 6 in. (2.3 m)
Transport Clearance 18 in. (457 mm) 18 in. (457 mm) 18 in. (457 mm) NP NP
Overall Length 28 ft. 3 in. (8.6 m) 29 ft. 3 in. (8.9 m) 29 ft. 8 in. (9.0 m) 26 ft. 10 in. (8.2 m) 31 ft. 10 in. (9.7 m)
Bowl Opening NP NP 56 in. (1,422 mm) 52 in. (1,321 mm) 52 in. (1,321 mm)
Frame Hitch Cast 360 Cast 360 MDU Yoke Yoke Yoke
Tire Size (2) 29.5 x 25 (2) 20.5 x 25 & (2) 23.5 x 25 20.5 x 25 Bias Ply or 20.5 x 25 Radial 17.5 x 25 Standard; 20.5 x 25 Optional 23.5 x 25 Standard; 26.5 x 25 Optional
Spindle Size Rear 3.25 in. (82.6 mm) 3.25 in. (82.6 mm) 5.75 in. (146 mm) NP NP
Frame Construction All Welded All Welded All Welded All Welded All Welded
Remotes Required NP NP 2 2 2
GPM Requirement NP NP 20 GPM @ 55 GPM Maximum Flow 25 GPM @ 2,500 PSI 25 GPM @ 2,500 PSI
Push-Off Cylinder NP NP 4 in. x 60 in. (102 x 1,524 mm) NP NP
Apron Cylinder NP NP 5 in. x 13 in. (127 x 330 mm) NP NP
Lift Cylinder NP NP 5 in. x 20 in. (127 x 508 mm) NP NP
Sequencing Valve NP NP Standard NP Standard
Paint Industrial Yellow Industrial Yellow Industrial Yellow Industrial Yellow Industrial Yellow
Safety Items Light Kit Light Kit NP NP NP
Hydraulic Brakes Standard Standard NP Yes Yes
Auxiliary Drawbar Optional Optional Yes Yes Yes
Tandem Haul Package (Hyd. & Hitch) Optional Optional Yes Yes Yes
Three Circuit Hydraulics NP NP Yes NP NP
Laser Mast Mount NP NP Yes Yes Yes
High Speed Leveling Pads NP NP NP Yes Yes
Website Address www.landoll.com www.landoll.com www.ashlandind.com www.Deere.com www.Deere.com

* Denotes Feature is Used on Specific Models; NP = Not Published; N/A = Not Applicable

Information provided is subject to change without notice.