Landoll Corporation

Search the Site  

Home > Products > Farm Equipment > Landoll Farm Equipment > 850 Finisholl > 850 Series Finisholl Compare Models

850 Finisholl Compare Models

Manufacturer Landoll Landoll John Deere Kuhn Krause Sunflower
Machine Classification Mulch Finisher Mulch Finisher Mulch Finisher Mulch Finisher Mulch Finisher
Model 850 Series Finisholl 875/876 Series Tilloll 2310 Series 6200/6400 Series 6200, 6300, 6400 Series
Working Width Range 11 ft. 4 in. - 35 ft. 4 in. (3.5 - 10.8 m) 10 ft. 6 in. - 40 ft. 0 in. (3.2 - 12.2 m) 18 ft. 9 in. - 45 ft. 9 in. (5.7 - 13.9 m) 9 ft. 0 in. - 45 ft. 0 in. (2.7 - 13.7 m) 17 ft. 4 in. - 42 ft. 9 in. (4.4 - 13.0 m)
Transport Width Range 13 ft. 0 in. - 17 ft. 4 in. (4.0 - 5.3 m) 12 ft. 0 in. - 17 ft. 9 in. (3.7 -5.4 m) 12 ft. 6 in. - 15 ft. 11 in. (3.8 - 4.9 m) 10 ft. 0 in. - 14 ft. 11 in. (3.0 - 4.5 m) 13 ft. 6 in. - 17 ft. 6 in. (4.1 - 5.3 m)
Transport Height Range 9 ft. 0 in. - 16 ft. 4 in. (2.7 - 5.0 m) 8 ft. 6 in. - 13 ft. 9 in. (2.6 - 4.2 m) 8 ft. 8 in. - 14 ft. 0 in. (2.6 - 4.3 m) 9 ft. 6 in. - 14 ft. 6 in. (2.9 - 4.4 m) 11 ft. 6 in. - 14 ft. 0 in. (3.5 - 4.3 m)
Total Weight Range 4,580 lbs. - 15,500 lbs. (2,077 - 7,031 kg) 5,059 lbs. - 18,800 lbs. (2,295 - 8,528 kg) NP NP NP
Depth of Frame NP NP 139 in. (3.5 m) NP NP
Distance Between Ranks NP NP 5 Ranks 5 Ranks NP
Frame Type All Welded Structural Tube All Welded Structural Tube 4 in. x 4 in. (102 x 102 mm) 3 in. x 4 in. (76 x 102 mm) NP
Frame Style Flexible/Folding Flexible/Folding Flexible/Folding Flexible/Folding Flexible/Folding
Hitch Type Self-Leveling with Single Lip Hitch Self-Leveling Level Lift Floating Self-Leveling with Single Lip Hitch
Hitch Category Cat. II or Cat. III Cat. II Cat. III or Cat. IV NP Cat. II or Cat. III
Fore/Aft Leveling Manual Adjustment Level Lift Manual Adjustment Integral with Hitch Type Integral with Hitch Mechanical
Depth Control Single Point Control at Front of Machine Single Point Control at Front of Machine Manual Single Point Mechanical Depth Control Single Point Depth Control
Lift Cylinders Phasing System Phasing System NP NP NP
Wing Frame Gauge Wheels Outrigger Style Gauge Wheels Std. on Folding Models Swivel Type Gauge Wheels Castering Gauge Wheels with 9.5L x 15 Tires Standard Gauge Wheels Standard Gauge Wheels
Gang Bearings Rock Flex Protected Bearing Assemblies Rock Flex Protected Bearing Assemblies NP NP NP
Gang Bearings Triple Lip Seals Regreaseable Triple Lip Seals Regreaseable Dura-Flex Regreaseable Super Seal Regreaseable Triple Sealed Regreaseable
Gang Bolt 1.5 in. (38.1 mm) 1.5 in. (38.1 mm) 1.125 in. (28.6 mm) 1.5 in. (38.1 mm) 1.75 in. (44.5 mm)
Gang Depth Adjustment Ratchet Jack NP Hydraulic Control Mechanical or Hydraulic Depth Control Mechanical or Hydraulic Depth Control
Disc Blades 20 in. (508 mm) Shallow Concavity 20 in. (508 mm) Shallow Concavity 20 in. (508 mm) x 0.197 in. (5.0 mm) Low Concavity 20 in. (508 mm) x 6 gauge Extra Low Concavity 20 in. (508 mm) x 6 gauge 1.32 in. (33.5 mm) Concavity
Disc Spacing 7.5 in. (191 mm) 7.5 in. (191 mm) 7.25 in. (184 mm) 9.125 in. (232 mm) 7.5 in. (191 mm)
Gang Angle 8 Degree 10 Degree NP 8 Degrees NP
Shank Type Spring Type / 2 pc. S-Tine Spring Type Spring Type K-Tines, Spring Type, HD Spring Tine 2-Piece S-Tine, Spring Tine
Point Load 150 lbs. (68.0 kg)/140 lbs. (63.5 kg) 150 lbs. (68.0 kg) 200 lbs. (90.7 kg) 180 lbs. (81.6 mm) or 190 lbs. (86.2 mm), 270 lbs. (122 kg) 190 lbs. (86.2 mm)
Shank Size 0.5625 in. (14.3 mm) x 1.75 in. (44.5 mm) 0.5625 in. (14.3 mm) x 1.75 in. (44.5 mm) 0.75 in. (19.1 mm) x 1.75 in. (44.5 mm) NP NP
Shank Style Edge Bent Standard Bolt Pattern Edge Bent Standard Bolt Pattern Flat Flat Flat
Under Frame Clearance 25.5 in. (648 mm) 25.5 in. (648 mm) 24 in. (610 mm) 25 in. (635 mm) 24 in. (610 mm)
Shank Spacing 8 in. (203 mm) 9 in. (229 mm) 9 in. (229 mm) 7 in. or 9 in. (178 or 229 mm) 9 in. (229 mm)
Standard Sweeps 10 in. (254 mm) 10 in. (254 mm) NP 9 in. (229 mm) or 10 in. (254 mm) 10 in. (254 mm)
Maximum Depth of Operation NP NP 5 in. (127 mm) 6 in. (152 mm) NP
Wheel Mounting Walking Tandem Walking Tandem Walking Beam Walking Tandem Walking Tandem
Spindle Size 2.0 in. (50.8 mm), 2.125 in. (54.0 mm) 2.25 in. (57.2 mm), 2.75 in. (69.9 mm) NP NP 2.0 in. (50.8 mm), 2.75 in. (69.9 mm)
Tire Size 9.5L x 15-8, 11L x 15-10 11L x 15-10, 12.5L x 15 Highway Service 9.5L x 15F1, 11L x 15F1, 12.5L x 16.5SL 9.5L x 15F1, 11L x 15F1, 12.5L x 16.5SL 11L x 15-12, 12.5L x 15-12, 12.5L x 15SL Highway Service
Hitch Options NP Cat. III & IV NP NP NP
Optional Sweeps Ultra-Wing in lieu of Standard Ultra-Wing in lieu of Standard 10 in. (254 mm) Perma-Loc in lieu of Standard NP NP
Hydraulic Gang Adjustment Yes NP NP NP Yes
Rear Mounted Leveling Attachment Flexible 5-Bar Spike Tooth Harrow 16 in. (406 mm) 10 Degree Chopper Reel Standard 6-Bar Spike Tooth Harrow 5-Bar Spike Tooth Harrow 6-Bar Spike Tooth Harrow
Rear Mounted Leveling Attachment NP 3-Bar Spike Tooth Harrow Standard 5-Bar Coil Tine Harrow 3-Bar Coil Tine NP
Rear Mounted Leveling Attachment Four Row Coil Tine Harrow NP Three Bar Coil Tine 4-Bar Coil Tine Harrow NP
Rear Mounted Leveling Attachment Three Row Spike and Reel NP Three Row Spike and Basket Three Row Spike and Reel Three Row Spike and Reel
Rear Mounted Leveling Attachment Three Row Coil Tine and Reel NP Three Row Coil Tine and Basket Three Row Coil Tine and Basket Three Row Coil Tine and Basket
Rear Hitch Yes NP Yes with Hydraulic Kit Yes with Tandem Haul Adaptor NP
Other Outrigger Style Gauge Wheels Per Pair NP Touch-Set Depth Control Package NP NP
Website Address www.landoll.com www.landoll.com www.deere.com www.krauseco.com www.sunflowermfg.com

* Denotes Feature is Used on Specific Models; NP = Not Published; N/A = Not Applicable

Information provided is subject to change without notice.