Brillion
Zone Commander

The Brillion Zone Commander is a compaction management tool designed to address soil compaction issues within the growth profile in a controlled manner in a defined area. Designed from the ground up to meet the requirements of compaction control with minimal surface disturbance, the Zone Commander has developed the reputation of being a very reliable machine that has the ability to work in unknown soil profiles without failure or downtime. Read More…

The 2500 In-Row Ripper is the Landoll equivalent of the Zone Commander. Brillion branded Zone Commander Literature coming soon.

Rugged and Durable

All tillage tools need to be built to handle the stress of the fast paced industry of today. However, deep tillage machines with depth capacities well below the normal operating depths need to be especially tough. In many instances these tools will be operating in profiles that have never been touched by a tillage tool before. The Zone Commander has what it takes.

The Frame

Built with 6” x 6” and 6″ x 4″ structural steel tubing, the robotically welded frame is the foundation for the heavy-duty Cat. II, III or IV three-point hitch. The robust frame is the anchor for the lead coulters that start the tillage process. The rear bar of the frame supports the Zone Commander’s shank assemblies.

The Shank Mount

The Zone Commander shank mounts are built to withstand the rigorous torture that operating in unknown soil profiles can dish out. The auto-reset spring shank assemblies allow for 2,300 lbs. of point load and 16” of trip height. New to the line-up is the heavy-duty hydraulic auto-reset shank assemblies that offer a massive 4,000 lbs. of point load and 28″ trip height. This is the most rugged shank offered and can handle heavy clay soils with ease and offers protection in rocky conditions. Rigid-shear bolt models are also available for areas with minimal soil obstructions.

The Shank Leg

The heart and soul of the Zone Commander is the shank leg, which cuts a narrow slot into the soil profile. The geometry of the shank leg and the shape of the point combine to lift and lower the soil between the slots and develop a network of horizontal cracks and breaks between the shanks. This slot along with the cracks and breaks created in the growth profile allow water and oxygen to infiltrate the soil to enhance plant growth for the next season. The depth of the slot is determined by how deep and thick the compaction layer is. This process is instrumental in keeping the biological environment favorable for residue decomposition.

Versatility in Options

The Zone Commander can be equipped with auto-reset spring shank assemblies, HD hydraulic auto-reset shanks, or rigid-shear bolt shanks. Shank leg options include the 1 ¼” straight leg, the 1 ¼” parabolic leg, or the ¾” low disturbance shank. Spring cushion lead coulters with different blade options cut the residue and slice the upper layers in the soil profile ahead of the shanks. Easily adjustable gauge wheels allow for quick, positive depth changes for different conditions. The Zone Commander is available in 3 to 7 shank non-folding models and in 7 to 16 shank folding models. The larger folding models include a heavy-duty pull hitch caddy.

Your Investment

The Zone Commander is more than just another ripper. The Zone Commander can be an integral part of almost any type of cropping scenario. Even though these machines were initially designed for deep in-line tillage, some customers use the Zone Commander for incorporation practices such as sludge and manure application. Others have utilized the parabolic shank leg option for more disturbance on the soil surface. Still others have opted for the low disturbance shank legs for the absolute least amount of surface disturbance. From true no-tillers to conventional tillage aficionados, the Zone Commander and its concept of compaction management is a yield enhancement investment.

The Brillion Zone Commander…one machine…widely diversified…your investment.

Features 

  • 6” x 6” Rear and 6″ x 4″ Front Frame Construction
  • Cat. II, III Narrow Three-Point Hitch for Narrow Non-Folding Models
  • Cat. III, IV Three-Point Hitch for Standard Non-Folding Models and Folding Models
  • Heavy-Duty Pull Hitch Caddy Included on Larger Folding Models
  • 40 ½” Under Frame Clearance
  • Maximum Working Depth of 20” on HD Hydraulic Auto-Reset Models and Rigid Shear Bolt Models; 16″ on Auto-Reset Spring Shank Models
  • Heavy-Duty Coulter Assemblies with 22” Smooth Blades
  • 600 lbs. of Down Pressure on Coulter Assemblies
  • Coulter Assemblies – 6” Trip Height
  • Turnbuckle Adjustable Gauge Wheels with 280/70R x 15 Radial Tires
  • Parking Stands
  • Powder Coat Paint
  • LED Warning Lights & SMV Emblem
  • Auto-Reset Spring, HD Hydraulic Auto-Reset or Rigid Shear Bolt Shank Assemblies
  • Choice of Straight Leg Shanks, Parabolic Shanks or Low Disturbance Shanks
  • Variety of Points and Wearstrips Available
  • 16” Trip Height on Auto-Reset Spring Shank Models with 2,300 lbs. of Point Load
  • 28″ Trip Height on Hydraulic Auto-Reset Shank Models with a Massive 4,000 lbs. of Point Load
  • Options Available for Coulter Assemblies

Spec Tables

Auto-Reset Spring Shanks, Non-Folding Units

wdt_IDProduct Attributes2511ZC-3N2511ZC-4N2511ZC-5N2512ZC-52512ZC-62512ZC-7
1Approximate Weight3,357 lbs. (1,523 kg)3,849 lbs. (1,746 kg)4,725 lbs. (2,143 kg)6,398 lbs. (2,902 kg)8,209 lbs. (3,724 kg)9,406 lbs. (4,266 kg)
2Working Width7 ft. 6 in. (2.3 m)10 ft. 0 in. (3.0 m)12 ft. 6 in. (3.8 m)12 ft. 6 in. (3.8 m)15 ft. 0 in. (4.6 m)17 ft. 6 in. (5.3 m)
3Transport Width9 ft. 3 in. (2.8 m)9 ft. 3 in. (2.8 m)12 ft. 0 in. (3.7 m)11 ft. 6 in. (3.5 m)13 ft. 5 in. (4.1 m)15 ft. 11 in. (4.9 m)
4Frame TypeNarrow Non-FoldingNarrow Non-FoldingNarrow Non-FoldingStandard Non-FoldingStandard Non-FoldingStandard Non-Folding
5Frame Structure6 in. x 4 in. (152 x 102 mm) Double Bar Frame6 in. x 4 in. (152 x 102 mm) Double Bar Frame6 in. x 4 in. (152 x 102 mm) Double Bar Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame
6Frame ConstructionLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically Welded
7Frame ExtensionsNoneNone12 in. (305 mm) Bolt-OnNone12 in. (305 mm) Bolt-On27 in. (686 mm) Bolt-On
8Coulter AssembliesStandardStandardStandardStandardStandardStandard
9Number of Coulters345567
10Coulter Blade Diameter22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)

* Units are equipped with choice of Straight Leg Shanks, Parabolic Shanks or Low Disturbance Shanks. Points and Wearstrips listed above as Standard are included with each respective shank choice, unless Optional equipment is chosen.

Auto-Reset Spring Shanks, Folding Units

wdt_IDProduct Attributes2512ZCF-72512ZCF-82512ZCF-92512ZCF-102512ZCF-112512ZCF-122512ZCF-132512ZCF-142512ZCF-152512ZCF-16
1Approximate Weight10,422 lbs. (4,727 kg)11,559 lbs. (5,243 kg)12,721 lbs. (5,770 kg)21,686 lbs. (9,837 kg)22,738 lbs. (10,314 kg)23,859 lbs. (10,822 kg)24,911 lbs. (11,299 kg)26,244 lbs. (11,904 kg)27,113 lbs. (12,298 kg)28,545 lbs. (12,948 kg)
2Working Width17 ft. 6 in. (5.3 m)20 ft. 0 in. (6.1 m)22 ft. 6 in. (6.9 m)25 ft. 0 in. (7.6 m)27 ft. 6 in. (8.4 m)30 ft. 0 in. (9.1 m)32 ft. 6 in. (9.9 m)35 ft. 0 in. (10.7 m)37 ft. 6 in. (11.4 m)40 ft. 0 in. (12.2 m)
3Transport Width13 ft. 11 in. (4.2 m)16 ft. 5 in. (5.0 m)13 ft. 11 in. (4.2 m)16 ft. 5 in. (5.0 m)18 ft. 11 in. (5.8 m)13 ft. 11 in. (4.2 m)18 ft. 11 in. (5.8 m)21 ft. 5 in. (6.5 m)18 ft. 11 in. (5.8 m)21 ft. 5 in. (6.5 m)
4Frame TypeThree-Point Hitch FoldingThree-Point Hitch FoldingThree-Point Hitch FoldingFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type Caddy
5Frame Structure6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame
6Frame ConstructionLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically Welded
7Frame Extensions2 ft. 0 in. (0.6 m) Wing2 ft. 0 in. (0.6 m) Wing2 ft. 0 in. (0.6 m) Wing4 ft. 4 in. (1.3 m) Wing4 ft. 4 in. (1.3 m) Wing6 ft. 10 in. (2.1 m) Wing6 ft. 10 in. (2.1 m) Wing6 ft. 10 in. (2.1 m) Wing9 ft. 4 in. (2.8 m) Wing9 ft. 4 in. (2.8 m) Wing
8Coulter AssembliesStandardStandardStandardStandardStandardStandardStandardStandardStandardStandard
9Number of Coulters78910111213141516
10Coulter Blade Diameter22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)

* Units are equipped with choice of Straight Leg Shanks, Parabolic Shanks or Low Disturbance Shanks. Points and Wearstrips listed above as Standard are included with each respective shank choice, unless Optional equipment is chosen.

Hydraulic Auto-Reset Shanks, Non-Folding Units

wdt_IDProduct Attributes2512ZCH-52512ZCH-62512ZCH-7
1Approximate Weight6,338 lbs. (2,875 kg)8,120 lbs. (3,683 kg)9,386 lbs. (4,257 kg)
2Working Width12 ft. 6 in. (3.8 m)15 ft. 0 in. (4.6 m)17 ft. 6 in. (5.3 m)
3Transport Width11 ft. 6 in. (3.5 m)13 ft. 5 in. (4.1 m)15 ft. 11 in. (4.9 m)
4Frame TypeStandard Non-FoldingStandard Non-FoldingStandard Non-Folding
5Frame Structure6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame
6Frame ConstructionLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically Welded
7Frame ExtensionsNone12 in. (305 mm) Bolt-On27 in. (686 mm) Bolt-On
8Coulter AssembliesStandardStandardStandard
9Number of Coulters567
10Coulter Blade Diameter22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)

* Units are equipped with choice of Straight Leg Shanks or Parabolic Shanks. Points and Wearstrips listed above as Standard are included with each respective shank choice, unless Optional equipment is chosen.

Hydraulic Auto-Reset Shanks, Folding Units

wdt_IDProduct Attributes2512ZCHF-72512ZCHF-82512ZCHF-92512ZCHF-102512ZCHF-112512ZCHF-12
1Approximate Weight10,302 lbs. (4,673 kg)11,409 lbs. (5,175 kg)12,541 lbs. (5,689 kg)21,476 lbs. (9,741 kg)22,540 lbs. (10,224 kg)23,589 lbs. (10,700 kg)
2Working Width17 ft. 6 in. (5.3 m)20 ft. 0 in. (6.1 m)22 ft. 6 in. (6.9 m)25 ft. 0 in. (7.6 m)27 ft. 6 in. (8.4 m)30 ft. 0 in. (9.1 m)
3Transport Width14 ft. 4 in. (4.4 m)16 ft. 1 in. (4.9 m)14 ft. 4 in. (4.4 m)14 ft. 4 in. (4.4 m)16 ft. 1 in. (4.9 m)14 ft. 4 in. (4.4 m)
4Frame TypeThree-Point Hitch FoldingThree-Point Hitch FoldingThree-Point Hitch FoldingFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type Caddy
5Frame Structure6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame
6Frame ConstructionLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically Welded
7Frame Extensions2 ft. 0 in. (0.6 m) Wing2 ft. 0 in. (0.6 m) Wing2 ft. 0 in. (0.6 m) Wing4 ft. 4 in. (1.3 m) Wing4 ft. 4 in. (1.3 m) Wing6 ft. 10 in. (2.1 m) Wing
8Coulter AssembliesStandardStandardStandardStandardStandardStandard
9Number of Coulters789101112
10Coulter Blade Diameter22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)

* Units are equipped with choice of Straight Leg Shanks or Parabolic Shanks. Points and Wearstrips listed above as Standard are included with each respective shank choice, unless Optional equipment is chosen.

Rigid Shear Bolt Shanks, Non-Folding Units

wdt_IDProduct Attributes2511ZCR-3N2511ZCR-4N2511ZCR-5N2512ZCR-52512ZCR-62512ZCR-7
1Approximate Weight2,410 lbs. (1,093 kg)2,735 lbs. (1,241 kg)3,345 lbs. (1,517 kg)5,573 lbs. (2,528 kg)7,219 lbs. (3,274 kg)8,251 lbs. (3,743 kg)
2Working Width7 ft. 6 in. (2.3 m)10 ft. 0 in. (3.0 m)12 ft. 6 in. (3.8 m)12 ft. 6 in. (3.8 m)15 ft. 0 in. (4.6 m)17 ft. 6 in. (5.3 m)
3Transport Width9 ft. 3 in. (2.8 m)9 ft. 3 in. (2.8 m)12 ft. 0 in. (3.7 m)11 ft. 6 in. (3.5 m)13 ft. 5 in. (4.1 m)15 ft. 11 in. (4.9 m)
4Frame TypeNarrow Non-FoldingNarrow Non-FoldingNarrow Non-FoldingStandard Non-FoldingStandard Non-FoldingStandard Non-Folding
5Frame Structure6 in. x 4 in. (152 x 102 mm) Double Bar Frame6 in. x 4 in. (152 x 102 mm) Double Bar Frame6 in. x 4 in. (152 x 102 mm) Double Bar Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame
6Frame ConstructionLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically Welded
7Frame ExtensionsNoneNone12 in. (305 mm) Bolt-OnNone12 in. (305 mm) Bolt-On27 in. (686 mm) Bolt-On
8Coulter AssembliesStandardStandardStandardStandardStandardStandard
9Number of Coulters345567
10Coulter Blade Diameter22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)

* Units are equipped with choice of Straight Leg Shanks, Parabolic Shanks or Low Disturbance Shanks. Points and Wearstrips listed above as Standard are included with each respective shank choice, unless Optional equipment is chosen.

Rigid Shear Bolt Shanks, Folding Units

wdt_IDProduct Attributes2512ZCRF-72512ZCRF-82512ZCRF-92512ZCRF-102512ZCRF-112512ZCRF-122512ZCRF-132512ZCRF-142512ZCRF-152512ZCRF-16
1Approximate Weight9,267 lbs. (4,203 kg)10,239 lbs. (4,644 kg)11236 lbs. (5,097 kg)20,036 lbs. (9,088 kg)20,923 lbs. (9,491 kg)21,879 lbs. (9,924 kg)22,766 lbs. (10,326 kg)23,934 lbs. (10,856 kg)24,638 lbs. (11,176 kg)25,905 lbs. (11,750 kg)
2Working Width17 ft. 6 in. (5.3 m)20 ft. 0 in. (6.1 m)22 ft. 6 in. (6.9 m)25 ft. 0 in. (7.6 m)27 ft. 6 in. (8.4 m)30 ft. 0 in. (9.1 m)32 ft. 6 in. (9.9 m)35 ft. 0 in. (10.7 m)37 ft. 6 in. (11.4 m)40 ft. 0 in. (12.2 m)
3Transport Width13 ft. 11 in. (4.2 m)16 ft. 5 in. (5.0 m)13 ft. 11 in. (4.2 m)16 ft. 5 in. (5.0 m)18 ft. 11 in. (5.8 m)13 ft. 11 in. (4.2 m)18 ft. 11 in. (5.8 m)21 ft. 5 in. (6.5 m)18 ft. 11 in. (5.8 m)21 ft. 5 in. (6.5 m)
4Frame TypeThree-Point Hitch FoldingThree-Point Hitch FoldingThree-Point Hitch FoldingFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type CaddyFolding with Pull-Type Caddy
5Frame Structure6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame6 in. x 6 in. x 0.5 in. (152 x 152 x 13 mm) Rear Frame 6 in. x 4 in. x 0.5 in. (152 x 102 x 13 mm) Front Frame
6Frame ConstructionLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically WeldedLaser Cut Components; Robotically Welded
7Frame Extensions2 ft. 0 in. (0.6 m) Wing2 ft. 0 in. (0.6 m) Wing2 ft. 0 in. (0.6 m) Wing4 ft. 4 in. (1.3 m) Wing4 ft. 4 in. (1.3 m) Wing6 ft. 10 in. (2.1 m) Wing6 ft. 10 in. (2.1 m) Wing6 ft. 10 in. (2.1 m) Wing9 ft. 4 in. (2.8 m) Wing9 ft. 4 in. (2.8 m) Wing
8Coulter AssembliesStandardStandardStandardStandardStandardStandardStandardStandardStandardStandard
9Number of Coulters78910111213141516
10Coulter Blade Diameter22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)22 in. (559 mm) Smooth Blade (Standard)

* Units are equipped with choice of Straight Leg Shanks, Parabolic Shanks or Low Disturbance Shanks. Points and Wearstrips listed above as Standard are included with each respective shank choice, unless Optional equipment is chosen.

Manuals

Zone Commander Operator’s Manual

Zone Commander Repair Parts Manual

To view manuals for previous versions of this or a different product line, click here.

Information presented here is subject to change without notice.