Page 4 - Bendi-B30-40-55AC-0224

TECHNICAL DATA
MODEL B30AC B40AC
Capacity at 24" (600mm) Load Center Ibs/kg 3,000 / 1,361 4,000 / 1,814
Weight with Battery lbs/kg 13,630 / 6,182 14,850 / 6,736
Loaded mph/kph 6.5 / 10.5 6.5 / 10.5
Travel Speed
Unloaded mph/kph 7 / 11.3 7 / 11.3
Loaded fpm/mpm 90 / 27.4 90 / 27.4
Lift Speed
Unloaded fpm/mpm 110 / 33.5 110 / 33.5
Loaded fpm/mpm 100 / 30.4 100 / 30.4
Lowering Speed
Unloaded fpm/mpm 90 / 27.4 90 / 27.4
Fwd / Back - Up to 293" (7.44M) deg 3 / 3 3 / 3
Mast Tilt
Fwd / Back - 294" (7.46M) and Higher deg 1 / 2 1 / 2
Lost Load Center E in/mm 12 / 305 12 / 305
Wheelbase F in/mm 63 / 1,600 63 / 1,600
Rear Overhang G in/mm 25 / 635 28 / 711
Overall Length Fork to Face H Mast Vertical in/mm 100 / 2,540 103 / 2,616
Underclearance I Under Mast in/mm 3 / 76 3 / 76
Operator Floor Height J in/mm 31 / 787 31 / 787
Overhead Guard Height K in/mm 89 / 2,261 89 / 2,261
Overhead Guard Width L in/mm 40 / 1,016 40 / 1,016
Overall Width M in/mm 45 / 1,143 50 / 1,270
Fork Carriage Width N in/mm 41 / 1,041 41 / 1,041
Fork Length O in/mm 40 / 1,016 40 / 1,016
Out to Out Fork Spread P Minimum / Maximum in/mm 9.4-39.5 / 239-1,003 9.4-39.5 / 24-100
Battery Compartment Height Q Floor to Top of Battery Tray in/mm 19 / 483 19 / 483
Right Angle Stacking Aisle with 48"L x 40"W (1,200mm x 1,000mm) Load in/mm 78 / 1,981 78 / 1,981
Intersecting Aisle with 48"L x 40"W (1,200mm x 1,000mm) Load in/mm 108 / 2,743 108 / 2,743
Gradeability Loaded / Unloaded % 15 15
Hydraulic Motor Rating Continuous Duty Rating type/kWh 12 12
Traction Motor Rating Continuous Duty Rating type/kWh 5.1 Ea / 10.2 Total 5.6 Ea / 11.2 Total
Traction Control Type Induction AC AC
Hydraulic Control Type Induction AC AC
Front (2 Each) Smooth Poly-Dia x Face in/mm 14x5 / 356x127 14x5 / 356x127
Wheel Sizes
Rear (2 Each) Smooth Rubber-Dia x Face in/mm 18x7 / 457x178 18x7 / 457x178
The specifications contained in this spec sheet are subject to change at any time without notice.
Actual dimensions and performance data given herein may vary due to manufacturing tolerances.

Landoll continuously improves products. We reserve the right to make any changes in illustrations,
specifications, equipment, and prices without prior notice and without changes on previous models.

Rear Controller Compartment
Loading / Unloading and Counterweight