Landoll Corporation

Search the Site  

Home > Products > Farm Equipment > Landoll Farm Equipment > 7400 VT Plus

7400 Series VT PLUS (Vertical Tillage)

Description

America's Favorite Vertical Tillage Machine

Isn’t it time that excessive residue levels and cold wet spring soils be addressed in your operation?  Put the 7400 VT Plus Series from Landoll to work and increase your return on investment with higher yields, a direct result of earlier planting and more uniform emergence.

Perfectly Sizes and Mixes Residue & Soil

7400VTPlus_270x181px.jpg

A great deal of research went into the design of the 7400 VT Plus Series.  Determining the perfect gang angle, disc blade, and spacing was addressed head on by the engineering staff.  The results are the ideal vertical tillage unit that has the ability to anchor residue, work at shallow depths, mix and blend the soil, kill weeds and level ruts from previous operations.  The smooth blades stay sharp longer and handle rocks and stones better than ripple or fluted blades.

Spring or Fall? It’s Your Choice

Better return on investment is what multi-tasking is all about.  The Landoll 7400 VT Plus Series offers you a true multi-tasking tool.  The VT can be used in fall, spring, or in both seasons!  In fall, the VT allows the decomposition process to begin by mixing just the right amount of soil with the residue.  The residue is anchored down to prevent wind and water erosion during the winter months.  In spring, the VT prepares the perfect seedbed.  Because the VT can perform at precise working depths, it can be set to run no deeper than where the seed will be placed during planting.

Durable and Reliable

The Landoll 7400 VT Plus Series is built in true Landoll style…precision, laser cut frame components that embrace the technology of robotic welding to its fullest.  Durability is built in, not added on.  Incorporation of UHMW polymer in the lift axles provides a maintenance-free feature that eliminates daily greasing.  Trunnion mount bearings are used throughout the disc assemblies and are covered by a 3-year warranty.  Gang angles are fixed at 10 degrees on the front and rear. Disc blades are spaced at 7” on all gangs on all sizes.  The blades are 22” low concavity; blade thickness is either 6 ga. or ¼”.  The self-leveling hitch and single point depth control add to the list of items that extend the reliability of the VT Plus beyond the competition. Oversized tires on walking tandem axles carry the load and allow for precision depth control across the entire width of the machine. Pivoting gauge wheels on the front of the wings contribute to controlled depth of the wings even at higher speeds.

Sized to Fit

The VT Plus Series is available in sizes from 13’ 10” to 49’ 9”.  The units up to 33 feet are 3 section folding while the units from 39’ 9” to 49’ 9” feet are 5 section folding.  The 3 section units transport under 17’ 11”.  The 5 section machines transport at 17’ 6”.  Transport heights range from 9’ 10” to 13’ 11”.  Horsepower requirements for the VT Plus Series is 10 HP per foot.

Results

With proper depth and timing, the 7400 Series VT Plus from Landoll can minimize moisture loss and improve seed to soil contact.  In the photo below, the VT made a pass on the left at 2" deep at 8 MPH; the right is no-tilled into standing canola stubble. The results are quite evident!  This photo was taken in March 2014 near Enid, Oklahoma.

VT-Plus-Results_560x460px.jpg

Features

Superior in Design - Best in Performance

  • Laser Cut, Robotically Welded Frame
  • 5 1/2” Lift Axles with Maintenance-Free Lift System
  • Walking Tandems on All Sizes (Single Wheel on Wing of 20 Foot)
  • Slip-In Spindles
  • 12.5L x 15 (GY-FI) Load Range F, 380/55R x 16.5, 32/1550 x 16.5 SL, 235/75R 17.5 Tires (Model Dependent)
  • Self-Leveling Hitch (Hydraulic Control Optional on 3 Section, Standard on 5 Section)
  • Cast Single Lip Hitch Cat. III or Cat. IV  (Model Dependent)
  • Single Point Depth Control
  • Pivoting Wing Gauge Wheels on All Models
  • 22” 6 Gauge or 1/4” Disc Blades Spaced at 7” on All Models
  • 10 Degree Gang Angle Front and Rear
  • 1 3/4” Gang Bolt
  • Solid 5 1/2” Cast Iron Spools of Front Gang
  • Steel Spools 5 1/2” Diameter with 1/4” Wall Thickness on Rear Gang
  • Trunnion Mount Bearings
  • C-Cushion Bearing Mounts
  • Overlapping/Staggered Offset Tandem Disc Gangs
  • Heavy-Duty Adjustable Scrapers
  • Adjustment/Maintenance Wrenches
  • Blue Powder Coat Paint
  • Safety Warning Lights

Compare Models

How does Landoll stack up against the competition? 

Read more

Specs

7400 Series - Rigid and Three Section Folding Models

7410-14 7431-20 7431-23 7431-26 7431-29 7431-33
Approximate Weight 10,940 lbs. (4,962 kg) 15,780 lbs. (7,158 kg) 18,135 lbs. (8,226 kg) 20,500 lbs. (9,299 kg) 22,165 lbs. (10,054 kg) 25,120 lbs. (11,394 kg)
Working Width 13 ft. 10 in. (4.2 m) 19 ft. 10 in. (6.0 m) 23 ft. 6 in. (8.1 m) 26 ft. 3 in. (8.0 m) 29 ft. 0 in. (8.8 m) 33 ft. 2 in. (10.1 m)
Front Gang Cut 11 ft. 8 in. (3.6 m) 17 ft. 8 in. (5.4 m) 22 ft. 0 in. (6.7 m) 24 ft. 5 in. (7.4 m) 26 ft. 10 in. (8.2 m) 31 ft. 4 in. (9.5 m)
Transport Width 15 ft. 2 in. (4.6 m) 13 ft. 7 in. (4.1 m) 13 ft. 7 in. (4.1 m) 13 ft. 7 in. (4.1 m) 13 ft. 7 in. (4.1 m) 17 ft. 11 in. (5.5 m)
Transport Height N/A 9 ft. 10 in. (3.0 m) 11 ft. 6 in. (3.5 m) 13 ft. 1 in. (4.0 m) 13 ft. 11 in. (4.2 m) 13 ft. 11 in. (4.2 m)
Number of Blades - Front Gang 22 34 40 44 48 56
Number of Blades - Rear Gang 24 36 42 46 50 58
Blade Diameter 22 in. (559 mm) 22 in. (559 mm) 22 in. (559 mm) 22 in. (559 mm) 22 in. (559 mm) 22 in. (559 mm)
Blade Thickness 0.25 in. (6.35 mm) 0.25 in. (6.35 mm) 0.25 in. (6.35 mm) 0.25 in. (6.35 mm) 0.25 in. (6.35 mm) 0.25 in. (6.35 mm)
0.25 in. (6.35 mm) Rollable 0.25 in. (6.35 mm) Rollable 0.25 in. (6.35 mm) Rollable 0.25 in. (6.35 mm) Rollable 0.25 in. (6.35 mm) Rollable 0.25 in. (6.35 mm) Rollable
6 ga. (4.86 mm) 6 ga. (4.86 mm) 6 ga. (4.86 mm) 6 ga. (4.86 mm) 6 ga. (4.86 mm) 6 ga. (4.86 mm)
Blade Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity Low Concavity
Blade Spacing - Front Gang 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm)
Blade Spacing - Rear Gang 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm)
Blade Scrapers 4 in. (102 mm) Adjustable 4 in. (102 mm) Adjustable 4 in. (102 mm) Adjustable 4 in. (102 mm) Adjustable 4 in. (102 mm) Adjustable 4 in. (102 mm) Adjustable
Blade Scraper Mount Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm
Gang Spools - Front Gang 5.5 in. (140 mm) Diameter Solid Cast 5.5 in. (140 mm) Diameter Solid Cast 5.5 in. (140 mm) Diameter Solid Cast 5.5 in. (140 mm) Diameter Solid Cast 5.5 in. (140 mm) Diameter Solid Cast 5.5 in. (140 mm) Diameter Solid Cast
Gang Spools - Rear Gang 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment
Gang Angle 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree 10 Degree
Gang Shaft 1.75 in. (44.5 mm) Round 1.75 in. (44.5 mm) Round 1.75 in. (44.5 mm) Round 1.75 in. (44.5 mm) Round 1.75 in. (44.5 mm) Round 1.75 in. (44.5 mm) Round
Number of Gang Bearings - Front 6 8 10 10 12 14
Number of Gang Bearings - Rear 6 8 10 10 12 14
Gang Bearings C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Frame 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm) 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm) 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm) 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm) 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm) 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots 5.5 in. (140 mm) with UHMW Maintenance Free Pivots 5.5 in. (140 mm) with UHMW Maintenance Free Pivots 5.5 in. (140 mm) with UHMW Maintenance Free Pivots 5.5 in. (140 mm) with UHMW Maintenance Free Pivots 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type - Main Frame Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots
Transport Axle Type - Wing Frame N/A - Non Folding Single Wheels Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 12.5L x 15 (GY-FI) Load Range F (4) 12.5L x 15 (GY-FI) Load Range F (4) 12.5L x 15 (GY-FI) Load Range F (4) 380/55R x 16.5 (4) 380/55R x 16.5 (4) 32/1550 x 16.5 SL
Wheel Hubs - Main Frame 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt
Spindles - Main Frame 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 3 in. (76.2 mm) Slip-In Spindles 3 in. (76.2 mm) Slip-In Spindles 3 in. (76.2 mm) Slip-In Spindles
Tire Size - Wing Frame N/A - Non Folding (2) 12.5L x 15 (GY-FI) Load Range F (4) 12.5L x 15 (GY-FI) Load Range F (4) 12.5L x 15 (GY-FI) Load Range F (4) 12.5L x 15 (GY-FI) Load Range F (4) 12.5L x 15 (GY-FI) Load Range F
Wheel Hubs - Wing Frame N/A - Non Folding 8-Bolt 8-Bolt 8-Bolt 8-Bolt 8-Bolt
Spindles - Wing Frame N/A - Non Folding 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Manual Adjustment Self-Leveling with Hydraulic Control Self-Leveling with Hydraulic Control Self-Leveling with Hydraulic Control Self-Leveling with Hydraulic Control Self-Leveling with Hydraulic Control
Hitch Category Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. III Single Lip with 2.0 in. (50.8 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole
Finishing Device Standard Standard Standard Standard Standard Standard
Finishing Device Type 15 in. (356 mm) Diameter Chevron Design Reel 15 in. (356 mm) Diameter Chevron Design Reel 15 in. (356 mm) Diameter Chevron Design Reel 15 in. (356 mm) Diameter Chevron Design Reel 15 in. (356 mm) Diameter Chevron Design Reel 15 in. (356 mm) Diameter Chevron Design Reel
Rod Diameter 0.875 in. (22.2 mm) 0.875 in. (22.2 mm) 0.875 in. (22.2 mm) 0.875 in. (22.2 mm) 0.875 in. (22.2 mm) 0.875 in. (22.2 mm)
Number of Mounting Arms 2 Per Section 2 Per Section 2 Per Section 2 Per Section 2 Per Section 2 Per Section
Reel Protection Adjustable Spring Loaded Down Pressure Adjustable Spring Loaded Down Pressure Adjustable Spring Loaded Down Pressure Adjustable Spring Loaded Down Pressure Adjustable Spring Loaded Down Pressure Adjustable Spring Loaded Down Pressure
Reel Bearings C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Machine Depth Control Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted
Wing Gauge Wheels - Swivel Type N/A - Non Folding (2) Standard (2) Standard (2) Standard (2) Standard (2) Standard
Safety Warning Lights and SMV Emblem Standard Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard Standard
Adjustment Wrenches Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Blue Sapphire Standard Standard Standard Standard Standard Standard
Hydraulic Self-Leveler with Indicator Optional Standard Standard Standard Standard Standard
Hydraulic Reel Control Optional Optional Optional Optional Optional Optional
Rear Hitch With Hydraulic Hoses N/A Optional Optional Optional Optional N/A
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) Optional Optional Optional Optional Standard Standard
Double Lip Hitch Clevis (1.563 in. Hole) Optional Optional Optional Optional Optional Optional
Spare Tire & Wheel Assembly Optional Optional Optional Optional Optional Optional
Horsepower Requirements 8 to 10 HP (6 to 7 kW) per Foot 8 to 10 HP (6 to 7 kW) per Foot 8 to 10 HP (6 to 7 kW) per Foot 8 to 10 HP (6 to 7 kW) per Foot 8 to 10 HP (6 to 7 kW) per Foot 8 to 10 HP (6 to 7 kW) per Foot

7400 Series - 5 Section Folding Models

7450-39 7450-44 7450-49
Approximate Weight 37,170 lbs. (16,860 kg) 39,490 lbs. (17,912 kg) 41,810 lbs. (18,965 kg)
Working Width 39 ft. 9 in. (12.1 m) 44 ft. 9 in. (13.6 m) 49 ft. 9 in. (15.1 m)
Front Gang Cut 37 ft. 6 in. (11.4 m) 42 ft. 6 in. (13.0 m) 47 ft. 6 in. (14.5 m)
Transport Width 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m) 17 ft. 4 in. (5.3 m)
Transport Height 11 ft. 0 in. (3.4 m) 12 ft. 3 in. (3.7 m) 13 ft. 6 in. (4.1 m)
Number of Blades - Front Gang 66 74 82
Number of Blades - Rear Gang 68 76 84
Blade Diameter 22 in. (559 mm) 22 in. (559 mm) 22 in. (559 mm)
Blade Thickness 0.25 in. (6.35 mm) 0.25 in. (6.35 mm) 0.25 in. (6.35 mm)
0.25 in. (6.35 mm) Rollable 0.25 in. (6.35 mm) Rollable 0.25 in. (6.35 mm) Rollable
6 ga. (4.86 mm) 6 ga. (4.86 mm) 6 ga. (4.86 mm)
Blade Concavity Low Concavity Low Concavity Low Concavity
Blade Spacing - Front Gang 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm)
Blade Spacing - Rear Gang 7 in. (178 mm) 7 in. (178 mm) 7 in. (178 mm)
Blade Scrapers 4 in. (102 mm) Adjustable 4 in. (102 mm) Adjustable 4 in. (102 mm) Adjustable
Blade Scraper Mount Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm
Gang Spools - Front Wing Gangs 5.5 in. (140 mm) Diameter Solid Cast 5.5 in. (140 mm) Diameter Solid Cast 5.5 in. (140 mm) Diameter Solid Cast
Gang Spools - Center Gangs & Rear Wing Gangs 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment
Gang Angle 10 Degree 10 Degree 10 Degree
Gang Shaft 1.75 in. (44.5 mm) Round 1.75 in. (44.5 mm) Round 1.75 in. (44.5 mm) Round
Number of Gang Bearings - Front 18 20 20
Number of Gang Bearings - Rear 18 20 20
Gang Bearings C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Frame 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm) 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm) 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots 5.5 in. (140 mm) with UHMW Maintenance Free Pivots 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type - Main Frame Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots
Transport Axle Type - Wing Frame Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (8) 235/75R17.5 (8) 235/75R17.5 (8) 235/75R17.5
Wheel Hubs - Main Frame 8-Bolt 8-Bolt 8-Bolt
Spindles - Main Frame 4 in. (102 mm) Slip-In Spindles 4 in. (102 mm) Slip-In Spindles 4 in. (102 mm) Slip-In Spindles
Tire Size - Wing Frame (8) 12.5L x 15 (GY-FI) Load Range F (8) 12.5L x 15 (GY-FI) Load Range F (8) 12.5L x 15 (GY-FI) Load Range F
Wheel Hubs - Wing Frame 8-Bolt 8-Bolt 8-Bolt
Spindles - Wing Frame 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles 2.25 in. (57.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Hydraulic Control Self-Leveling with Hydraulic Control Self-Leveling with Hydraulic Control
Hitch Category Cat. IV Single Lip with 2.25 (57.2 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole Cat. IV Single Lip with 2.25 (57.2 mm) Hole
Finishing Device Standard Standard Standard
Finishing Device Type 15 in. (356 mm) Diameter Chevron Design Reel 15 in. (356 mm) Diameter Chevron Design Reel 15 in. (356 mm) Diameter Chevron Design Reel
Rod Diameter 0.875 in. (22.2 mm) 0.875 in. (22.2 mm) 0.875 in. (22.2 mm)
Number of Mounting Arms 2 Per Section 2 Per Section 2 Per Section
Reel Protection Adjustable Spring Loaded Down Pressure Adjustable Spring Loaded Down Pressure Adjustable Spring Loaded Down Pressure
Reel Bearings C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Machine Depth Control Single Point, Front Mounted Single Point, Front Mounted Single Point, Front Mounted
Wing Gauge Wheels - Swivel Type (4) Standard (4) Standard (4) Standard
Safety Warning Lights and SMV Emblem Standard Standard Standard
Safety Chain Kit Standard Standard Standard
Adjustment Wrenches Standard Standard Standard
Powder Coat Paint, Blue Sapphire Standard Standard Standard
Hydraulic Reel Control Optional Optional Optional
Rear Hitch With Hydraulic Hoses Optional Optional Optional
Cat. V Single Lip Hitch Clevis (3 in. Hole) Optional Optional Optional
Spare Tire & Wheel Assembly Optional Optional Optional
Horsepower Requirements 8 to 10 HP (6 to 7 kW) per Foot 8 to 10 HP (6 to 7 kW) per Foot 8 to 10 HP (6 to 7 kW) per Foot

Specifications subject to change without notice.

Videos

Literature

Downloadable Literature

7400 Series VT Plus

7400 Series VT Plus (Printable Version)

Request Printed Literature

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.

Note: To request literature for multiple products, visit our Literature Request page.


 

Captcha Code

Click the image to see another captcha.
 

Manuals

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for Three-Section Folding VT Plus models.

This manual contains repair part listings for Three-Section Folding VT Plus models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for Five-Section Folding VT Plus models.

This manual contains repair part listings for Five-Section Folding VT Plus models.

To view manuals for previous versions of this or a different product line, click here.