Bendi Narrow Aisle Electric Forklift

The Bendi B3/30AC forklift works in aisles as narrow as 72″ (1.83M)*, has a starting capacity of 3,000 lbs (1361kg) at 24″ (600mm) load center and lift heights available to 30′ (9.14M).

A 3-wheel articulating forklift with a single poly front drive tire and solid rubber rear tires. Front articulation of 220°, narrow mast and a compact front end allow easy stacking in Very Narrow Aisles. The Bendi B3/30AC can work inside and outside on paved surfaces. It can do the same jobs of a reach truck, in aisles at least 40″ (1M) smaller.

* Based on 48” (1200mm) long x 40” (1000mm) wide load.

Exceptional Performance and Maneuverability

Equipped with the LandActive control and the Landoll DuraSteer™ front wheel hydraulic steering, the B3/30AC provides exceptional control and makes load placement and retrieval superior to the competition.

Maximizes Material Handling Productivity

The versatile Bendi B3/30AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. All tires on the Bendi B3/30AC are 18″ (457mm) diameter and the truck has great under clearance for avoiding floor obstructions.


  • 3,000 lb. (1361kg) Capacity at 24″ (600mm) Load Center
  • 3-Wheel Design, Single Front Wheel Drive Provides Excellent Maneuverability and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Integral Sideshifter Makes Placing and Picking Loads Effortless
  • DuraSteer™ Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • LandActive Control Provides Enhanced Traction Control Based on Steering Angle
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • High Visibility Mast Allows Optimum Safety and Control
  • AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 48 Volt Electrical System and Large Capacity Battery Compartment
  • Optional Cold Storage Conditioned to -22°F (-30°C)


  • Non-Standard Fork Lengths
  • Dual Overhead Guard-Mounted LED Headlights
  • Dual Rear Safety LED Light Bars
  • Safety Flashing LED Light
  • Backup Alarm – Beeping Tone (“Smart” dB Adjusting)
  • Fire Extinguisher – OHG Post Mounted
  • Roller / Slide-Out Battery Tray
  • Lazer Fork Height Indicator
  • Fork Positioner
  • Keyless Key Pad On-Off
  • Cold Storage Conditioned to -22°F (-30°C)


  • Three-Wheel Design, Single Front Wheel Drive
  • 9.75” (248mm) Stroke Integral Side Shifter
  • 220˚ Front End Rotation
  • Adjustable Seat and Steering Wheel
  • DuraSteer™ Front Wheel Hydraulic Steering
  • AC Traction Motor Controller with LandActive Control (LandActive control provides additional control during stacking as the maximum truck speed is controlled by steering angle.)
  • AC Hydraulic Motor Controller
  • Interactive LCD Status Monitor
  • BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration
  • Hydraulic Rear Wheel Brakes
  • Safety Seat Switch and Seat Belts
  • 40” (1000mm) Tapered Tip Forks – Rear Tow Pin
  • Hand Actuated Parking Brake
  • Creep Speed Mode Selection Switch
  • High Visibility Mast and 36” (914mm) High Backrest
  • Mast Tilt 1º Forward and 2º Backward
  • 48 Volt Electrical System
  • Three Section Hydraulic Control Valve
  • Smooth Poly Front Drive Tire and Rubber Rear Tires
  • Horn, Key Switch and Hour Meter
  • Meets ANSI B56.1