Maximize Payload and Profitability
The 930E Traveling Tail is part of the 900 E-Series trailers. The tail is capable of lifting 24,000 lbs up to 53″ dock height. Maximize your loads by utilizing the entire deck and maximize your payload by having the undercarriage five feet behind the main hinge. The longer wheelbase gives you proper weight distribution between tractor and trailer and fully supports the tail.
The traveling tail concept allows for stable dock loading and increases your payload by having a longer wheelbase.
Why Own a 900 E-Series
Quick, simple, safe operation and a longer wheelbase that increases payload. A 15′ tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 E-Series trailers. The tail can raise and lift 24,000 lbs up to 57″ dock height. The 900 E-Series trailers are backed by a 5-year structural warranty.
Work with Ease
The low-load tail angle ensures easy clearance for loading low-sitting equipment, providing seamless loading capabilities. The hydraulic control allows for efficient and convenient loading and unloading operations, all managed through a single control point.
Features
Frame & General
| Capacity* | 35 Ton (70,000 lbs.) |
|---|---|
| Deck Rating | 50,000 lbs. in 10′ |
| Estimated Base Weight | 16,300 lbs. (48′) +/-3% |
| Main Frame | Fabricated 80,000 PSI Yield 4-Beam Design |
| Crossmembers | 4″ Junior I-Beam and 3″ Junior I-Beam on 8″ Centers |
| Slope Drop | 90° |
| Parking Stands | Jost Two Speed Landing Gear |
| Pin Setting | 18″ |
| Swing Clearance | 84″ |
| Hitch | Fifth-Wheel Kingpin |
| Deck Width | 102″ |
| Loaded Deck Height | 38″ |
| Loaded Ground Clearance | 20″ |
| Decking | 1-3/8″ Nominal Apitong (Lower Deck) |
| Tool Box | Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated |
| Tie Downs | Double Key Hole Chain Slot / Gotchas on 16″ Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Slope at Deck |
| Tail Lifting Capacity | 24,000 lbs. |
| Load Angle | 11° with 15′ Tail |
| Features | Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail, Center Deck Keyholes on Tail, Bolt-On Traction Plate Over Approach Plate |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Slope Ramp
| 6′ x 102″ Upper Deck Ramp (Air operated) (10,000 lbs. capacity) (11.5° load angle) |
|---|
Suspension & Undercarriage
| Suspension | Neway Air Ride RLU228, 22,500 lbs. Capacity with Manual Dump Valve |
|---|---|
| Undercarriage | Centralized Grease System |
| Axles | (2) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters |
| Axles Prepped for Air Inflation | |
| Brakes | 12.25 x 7.5 Full Air / Spring Brakes ABS, 4S2M |
| Tires | 235/75R 17.5 LRJ Double Coin |
| Rims | 17.5 x 6.75 Tubeless |
| Wheels | Steel Hub Pilot |
| Oil Seal Hubs | Internal Mated Assembly |
Hydraulics
| Hydraulic Hook Up | Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max |
|---|---|
| Hydraulic Winch | Upper Deck 12,000 lbs. Worm Gear with 85′ of 1/2″ Cable with Wear Plate |
| Hydraulic Valve Body | Rexroth |
Electrical
| Air / Electrical | 7 Way Receptacle |
|---|---|
| Lights | Grote MicroNova LED Clear Lens-Enhanced Stop, Tail & Turn; Rear Amber Strobe (10-year warranty) |
| Wiring Harness | Grote “Xtreme” Wiring Harness (7-year warranty) |
Finish & Color
| Finish | Steel Grit Shot Blast to Bright Metal |
|---|---|
| Color | Zinc Rich Primer |
| Powder Coat Color | White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue |
| Decals | Hi-Visibility Reflective Package |
Options
Bulkhead
| 16″ / 24″ 2 Position Bulkhead / Front Extension (Solid) (1,500 lbs. capacity 3,000 lbs. distributed) Powder Coated Black | |
|---|---|
| 48″ High Mesh 102″ Powder Coated Black | |
| Steel Bulkhead Wings | |
| Aluminum Bulkhead Wings | |
| Bolt-On Binder Storage Rack for 48″ Bulkheads | |
| LED Work Light | Dual (Mounted on Bulkhead) |
| Aluminum Light Bar, Bulkhead Mounted, Includes Dual LED Work Lights, Stop / Turn / Tail Lights, Aluminum Chain / Binder Rack | |
| Spare Tire Carrier | 48″ Bulkhead, Front Mounted |
| Spare Tire Carrier | 48″ Bulkhead, Rear Mounted |
| Spare Tire Carrier | Front Pocket Mounted |
| Dual LED Strobe Beacons | |
Parking Stands
| Pin Drop in lieu of Standard |
|---|
Tie Downs
| Flush Mounted D-Rings (Each) | |
|---|---|
| D-Ring Bolt-On at Winch (Each) (Two locations available) | |
| Recessed Mounted D-Rings (Each) (Not totally recessed with additional crossmembers) |
Winch & Accessories
| 20,000 lbs. Worm Gear Winch in lieu of 12,000 lbs. Standard. Upper Deck | |
|---|---|
| 20,000 lbs. Warn Planetary Winch, 2 Speed, with Air Release / Spring Tension in lieu of Standard | |
| 30,000 lbs. Warn Planetary Winch, 2 Speed, with Air Release / Spring Tension in lieu of Standard | |
| Delete Standard 12,000 lbs. Winch | |
| Guard, Winch 12/20K (Cannot be used in conjunction with Pivoting Cable Roller Guide) | |
| Cable Roller Guide for Winch | 12,000 lbs. or 20,000 lbs. |
| Pivoting Cable Roller Guide for Winch with Air Tension / Air Release | 20,000 lbs. |
| Wireless Remote Control | Six Function for Rexroth Valve |
Deck & Accessories
| Toolboxes | Non-Load Bearing, Top Opening (Standard) Load Bearing, Self-Supporting, Top Opening Side Opening |
|---|---|
| Traction Bars for Tail | Weld On 12′ Tail (1” sq. 6” spacing) (Recommended when loading track equipment) Weld On 15′ Tail (1” sq. 6” spacing) (Recommended when loading track equipment) |
| Bolt-On Steel Landoll Traction Plate over 1” Wood on Tail | |
| Keyhole Tie Downs for Center Main Deck (Level with wood) | |
| Double Drop Deck in lieu of Standard (Long frame only) (48-12) or (51-15) | |
| Keyhole Tie Downs for Center Deck (Level with wood) | |
| Lower Deck Bolt-On Lockable Tool Box (Curb or street side) (42″W x 28″ D x 9″H) | |
| Swing Out Side Turn Signal / Emergency Flasher Lights (1) Pair, Locations available, Upper Deck Behind Tool Box, Lower Deck Behind Center Turn Light (1) Pull-Out Step (Drivers side and/or curb side available) | |
Suspension & Undercarriage
| Air-Weigh Digital Scale System Bluetooth Loadmax Plus/ Quickload Plus | |
|---|---|
| Galvanized Bumper in lieu of Standard Painted Bumper |
Hydraulic Power Source
| Wet Kit for Tractor (Includes 30 Gallon Steel Tank) | Shipped loose with trailer or factory installed |
|---|---|
| Hydraulic Quick Couplers 1 Male / 1 Female (Matches trailer) (P/N 105902) | |
| Polished Aluminum Hydraulic Tank, (19″W x 24D”) (Side mount) in lieu of Standard | |
| Hydraulic Engine Package | Upper Deck with Cover Kohler EFI 25 HP Gas Kohler 25 EFI HP Gas – Under Deck Mount (Not available with Upper Deck Ramp) |
Tires & Rims
| 235/75R 17.5 Continental Tires in lieu of Standard | |
|---|---|
| 245/70R 17.5 Michelin (Multi T) LRH Tires in lieu of Standard (235 not available) | |
| 255/70R 22.5 Double Coin Tires in lieu of Standard | |
| 255/70R 22.5 Michelin Tires in lieu of Standard | |
| Spare Double Coin Tire and Hub Pilot Type Rim (235/75R 17.5) | |
| Spare Continental Tire and Hub Pilot Type Rim (235/75R 17.5) | |
| Spare Michelin Tire and Hub Pilot Type Rim (245/70R 17.5) | |
| Spare Double Coin Tire and Hub Pilot Type Rim (255/70R 22.5) | |
| Spare Michelin Tire and Hub Pilot Type Rim (255/70R 22.5) | |
| 17.5 Aluminum Wheel (8-bolt polished) in lieu of Standard (Each) | |
| 17.5 Aluminum Wheel (8-bolt machined) in lieu of Standard (Each) | |
| 22.5 Aluminum Wheel (10-bolt polished) in lieu of Standard (Each) | |
| 22.5 Aluminum Wheel (10-bolt machined) in lieu of Standard (Each) | |
| Hubometer | |
| Pressure Guard Tire Inflation N/A | |
| Crossfire Air Equalizers (Price per axle) |
Paint & Special
| Hot Dip Galvanizing (Trailer frame is totally submerged) | Adds minimum 3 weeks to delivery |
|---|---|
| Paint Over Galvanizing | Sides only with Standard Colors only |
| Paint Over Galvanizing | Top surface only with Standard Colors only |
| Special Paint | Contact factory |
Specifications
| Model | Capacity* | Base Weight | Length | Tail Length | Deck | Axles | Tires & Ply Ratings |
|---|---|---|---|---|---|---|---|
| 930E-45-12 | 35 Ton | 17,265 lbs. (+/- 3%) | 45′ | 12′ | 102″ x 35’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
| 930E-48-12 | 35 Ton | 17,660 lbs. (+/- 3%) | 48′ | 12′ | 102″ x 38’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
| 930E-48-15 | 35 Ton | 18,770 lbs. (+/- 3%) | 48′ | 15′ | 102″ x 38’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
| 930E-51-15 | 35 Ton | 19,250 lbs. (+/- 3%) | 51′ | 15′ | 102″ x 41’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Specifications subject to change without notice.
Disclaimer: Landoll has a corporate policy of continuous product improvement and development, therefore, specifications are subject to change without any advance notice. Landoll is not responsible for differences between the specifications or illustrations contained on literature, data sheets, website and actual equipment.
The information on any form of this website is intended only for the sole use of Landoll. We do not share or sell any of this information to third parties. This drawing and all information therein is property of Landoll and is confidential. It must not be made public or copied. This drawing is loaned subject to return upon demand and shall not be used directly or indirectly in anyway detrimental to our interest. Drawing illustrates standard equipment; optional equipment may change standard measurements.
Gallery
