Haul More with Landoll Hauloll Detachable
The new 845-AG Hauloll is designed to move today and tomorrow’s heaviest equipment. The 845-AG’s 45-ton capacity is matched to handle even the heaviest of the field-ready tractors and choppers in production today. The heavy haul requirement was carefully considered during the product development of the 845E-AG resulting in a trailer that comes standard with a Heavy Duty Gooseneck with provisions for a 36” Flip extension.
Raising the Bar on GVWR
Most 2-axle base trailers run out of GVWR to legally permit many heavier loads. The Landoll 845-AG tops out at 116,500 lbs. / 51,076 KG GVWR allowing for a full 90,000 lbs. of payload. The trailer equipped with the gooseneck extension and the third flip axle will scale even the toughest ag tractors. Each state DOT controls the exact weighs you can transport on their highways.
Regen-Hoss Hydraulics
The 845-AG is built for the heavy haul and it comes standard with REGEN-HOSS hydraulics, the new hydraulic-regeneration valve system with Rexroth valve rated at 2500 PSI and 20 GPM. That is a significant increase in hydraulic speed, decreasing the amount of time it takes to load equipment.
Built for the Heavy Haul – Ag, Construction, Forklifts, & More
The 845-AG capacity comes in at 45 tons (90,000 lbs. within 16’ and 80,000 lbs. within 12’) and a 19-1/4” loaded deck height keeps the center of gravity lower than most detachable trailers. This trailer is built with heavy haul aluminum pullouts that are 30% stronger than the 835 pullouts and extend out to 13’ wide in 6” increments. Pulled out to the proper width and planked, these over widths are designed to handle big wheel loader and some tracking equipment. Enlarged lift cylinders with a 150,000 lbs. lift capacity and gooseneck flip brackets for 36” flip overextension round out the heavy haul features on the 845-AG. The heavy haul load carrier allows the driver to match the needed ground clearance in one of the 7-ride height positions to choose from.
Features
Frame & General
| Capacity* | 45 Tons (90,000 lbs.) |
|---|---|
| Dual Deck Rating | 90,000 lbs. in 16′, 80,000 lbs. in 12′ |
| Estimated Base Weight | 21,800 lbs. (845-48HD) +/- 3% |
| Main Frame | Fabricated 13″ Beam, 100,000 PSI Yield Flanges |
| Deck Width | 102″ |
| Loaded Deck Height | 19-1/4″ |
| Loaded Ground Clearance | 7″ |
| Decking | 1-1/2″ Nominal, Apitong Full Width |
| Crossmembers | 8″ x 3″ Rect Tube on 18″ Centers |
| Hitch | Patented Automatic Gooseneck Lock Engagement |
| Gooseneck | 12′ Heavy Duty (Includes Flip Brackets) |
| Pin Setting | 15″ |
| Swing Clearance | 84″ |
| Side Extension | 27″ Aluminum Telescoping Side Extensions (Lower Deck) (Capacity 9,000 lbs. each) |
| Accessories | 845HD-AG 48′ and 53′ Frame Prepared w/Flip Bkts Electric and Air for 3rd Axle Flip, includes Frame Provision for Hydraulic Flip (Adds components for Rear Trunnion and Bumper) Hydraulic Flip Option Not Available on 845E-53HD-AG-S60 |
| Tool Box | None Standard |
| Gooseneck Tie Downs | D-Rings: (2) Each at Front Corner; (2) Each at Back |
| Lower Deck Tie Downs | Side Mounted D-Rings on 36″ Centers |
| Rear Trunnion Tie Downs | D-Rings: (2) Each at Base Flush Mounted on Top of Inner Beams; (2) Each Web Mounted on Top; (2) Each Rear Flush Mounted on Top of Inner Beams; (2) Each Top of Slope (Outer web) |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Suspension & Undercarriage
| Suspension | Neway Air Ride, 25,000 lbs. Capacity |
|---|---|
| Grease | Centralized Grease System |
| Axles | (2) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Automatic Slack Adjusters |
| Axles Prepped for Air Inflation | |
| Brakes | 16.5 x 7 Full Air / Spring Brakes, ABS 4S2M |
| Tires | 255/70R 22.5 LRH Double Coin |
| Rims | 22.5 x 8.25 Steel |
| Wheels | Steel Hub Pilot |
| Oil Seal Hubs | Internal Mated Assembly |
Hydraulics
| Hydraulic Hook Up | Quick Couplers / 2,500 PSI – 20 GPM at Controls; 50GPM Max |
|---|---|
| Cylinders | Gooseneck Cylinder Hoizontally Mounted |
Electrical
| Air / Electrical | 7-Way Receptacle |
|---|---|
| Lights | Grote Clear Lens LED with Chrome Bezel (10-year warranty) |
| Wiring Harness | Grote “Xtreme” Wiring Harness (7-year warranty) |
Finish & Color
| Finish | Steel Grit Shot Blast to Bright Metal |
|---|---|
| Powder Coat Color | White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue |
| Decals | Hi-Visibility Reflective Package |
Options
Gooseneck
| Removable Aluminum Upper Deck (P/N 171909) | Full Width for 12′ Gooseneck (124″L x 102″ W) 10,000 lbs. Capacity |
|---|---|
| Weld-On Steel Deck with Rub / Chain Rail | |
| 12,000 lbs. Warn Planetary Winch, Single Speed with Air Release (Wet Kit only) | |
| 20,000 lbs. Warn Planetary Winch, 2 Speed with Air Release (Wet Kit only) | |
| 30,000 lbs. Warn Planetary Winch, 2 Speed with Air Release (Wet Kit only) | |
| Bolt-On Chain and Binder Rack Between Lock Arms | |
| Gooseneck Mud Flaps | |
| Wireless Remote Control for Winch | |
| Bolt-On Lockable Tool Box (Curb side) (14″W x 22.5″D x 24″H) | |
| Heavy Duty Gooseneck in lieu of Standard (Includes Flip Brackets) | |
| 36″ Front Flip Extension for Heavy Duty Gooseneck only (119″ swing clearance) | |
| Gooseneck LED Lights (2 stop / turn / tail and 1 white work light per side) | |
| Liquid Filled (Oil) Weight Pressure Gauge Located by Control Panel | |
Trunnion – 102″ Wide
| Removable Aluminum Rear Deck (P/N 105190) (73″L X 102″W) 10,000 lbs. Capacity (For 845AG-48 and 845AG-53 Standard 2 axle only) | |
|---|---|
| Removable Aluminum Rear Deck (P/N 129311) (127″L x 102″ W) 10,000 lbs. Capacity (For 845R only) | |
| Weld-On Steel Frame Wood Deck with Rub / Chain Rail (2 axles only) | |
| Weight Cut Out Package for Wood Deck (Includes Cutout Base Cover) | |
| Weight Cut Out Package for Aluminum Deck (Includes Cutout Base Cover) | |
| Flip Third Axle Assembly 60” Spread | |
| Aluminum Deck for Flip Axle Assembly | |
| Hydraulic Flip for Flip Axle Assembly | |
| Wheel Well Cover, Steel (Weld-on) (2 axle) | |
| Boom Trough Cover (1/4″ Steel Tread Plate) (2 axles) | |
| Poly Fenders for Trunnion (2 axle) | |
| Poly Fenders for Flip | |
| Slope Cover Assy (P/N 135811) (Non-weight bearing) with 2 Access Holes for Tie Down D-Rings | |
| Traction Bars for Trunnion Slope (Track area) |
Trunnion – 108″ Wide
| 108” Wide Main Deck and Trunnion in lieu of STD (2 axle frame, 31’ deck, 60” spread and 3 axle frame, 27’ deck, 60” spread only) | |
|---|---|
| Removable Aluminum Rear Deck #TBD (73”L x 108”W) 10,000 lbs. Capacity (For 845AG-48 and 845AG-53 STD 2 axle only) | |
| Weld-On Steel Frame Wood Deck with Rub Chain Rails (2 axle only) | |
| Weight Cut Out Package for Wood Deck (Includes Cutout Base Cover) | |
| Weight Cut Out Package for Aluminum Deck (Includes Cutout Base Cover) | |
| Flip Third Axle Assembly 60” Spread (Frame ready for Hydraulic Flip Option) | |
| Aluminum Deck for Flip Axle Assembly | |
| Hydraulic Flip for Flip Axle Assy. | |
| Cotton Picker Wheels Wells (108” wide only) | |
| Wheel Well Cover, Steel (Weld-on) (2 axle) | |
| Boom Trough Cover (1/4″ Steel Tread Plate) (2 axles) | |
| Poly Fenders for Trunnion (2 axle) | |
| Poly Fenders for Flip | |
| Slope Cover Assy #TBD (Non-Weight Bearing) w/2 Access Holes for Tie-down D-Rings | |
| Traction Bars for Trunnion Slope (Track Area) |
845E-53HD-AG-S6010 – 120″ Wide
| 10′ Wide Main Deck and Trunnion in lieu of Standard (2 axle frame, 26′ deck, 60″ Spread and 3 axle frame) | |
|---|---|
| Removable Aluminum Rear Deck (145”L X 120”W) 10,000 lbs. Capacity (For 845AG 3 axle-S60) | |
| Weight Cut Out Package for Wood Deck (Includes Cutout Base Cover) | |
| Weight Cut Out Package for Aluminum Deck (Includes Cutout Base Cover) | |
| Weld-On Steel Frame Wood Deck with Rub / Chain Rail 3 Axle 10’ Wide 60” Spread | |
| Aluminum Deck for Flip Axle Assembly (10′ wide) | |
| Weld-On Steel Frame Wood Deck with Rub / Chain Rail for Flip Axle Assembly (10’ wide) | |
| Slope Cover Assembly (P/N 180910) (Non-weight bearing) with 2 Access Holes for Tie Down D-Rings for 10’ Wide | |
| Traction Bars for Trunnion Slope for 10’ Wide (Track area) |
Deck & Accessories
| Aluminum Ladder Ramp Assy 70″ Long, (One pair, P/N 125836) “Lower Deck to Rear Trunnion” (For trailer built after 11/2003) 9,000 lbs. Capacity (4,500 each) | |
|---|---|
| Adjustable Aluminum Ladder Ramp with Rod Bracket, Full Width (P/N 148786 and 110527 for 102” wide trailers) | |
| Adjustable Aluminum Ladder Ramp with Rod Bracket, Full Width (P/N 164814 and 110527 for 120” wide trailer) | |
| Adjustable Aluminum Ladder Ramp with Rod Bracket, Track Area only (P/N 182056 and 110527 for 102” wide trailers with weight cut-out) | |
| Adjustable Aluminum Ladder Ramp with Rod Bracket, Track Area only (P/N 192387 and 110527 for 120” wide trailers with weight cut-out) | |
| Flush Mounted “Angled” D-Ring (Each) | |
| Recessed Mounted D-Rings | |
| 3/8 x 3-1/2 Double Keyhole Strap Full-Length Lower Deck on Each Side | |
| Aluminum Filler for Front Pullout (Recommended when loading track units) | |
| Arctic Hose Package |
Accessories
| Flag and Banner Package (6 Flags and 2 overwidth Banners) | |
|---|---|
| Magnetic LED Amber Warning Lights (360° flashing, battery powered) | |
| Strobing Light Package Bumper (Each) One required for Frame, one required for Flip | |
| Four Corner Light Package (Attaches to Pull Out) | |
| Battery Back-Up for Strobe Lights (Used when Gooseneck detached) |
Suspension & Undercarriage
| Air-Weigh Digital Scale System LoadMaxx (Trailer only) | |
|---|---|
| LoadMaxx ComLink Cable Kit (Cable connects trailer unit to tractor scale) | |
| Air Raise and Lower Valve | |
| Air Lift / Retract per Axle |
Hydraulic Power Source
| Wet Kit for Tractor (Includes 30 Gallon Steel Tank) | Shipped loose with trailer or factory installed |
|---|---|
| Hydraulic Quick Couplers 1 Male / 1 Female (Matches trailer) (P/N 105902) | |
| Polished Aluminum Hydraulic Tank, (19″W x 24D”) (Side mount) in lieu of Standard | |
| 13 H.P. Honda Engine Package Gooseneck Mounted with Cover (Net 10.2 HP) | |
| Hydraulic Engine Package | Gooseneck Mounted with Cover 25HP EFI Kohler Gas Includes Mounting Kit (P/N 178434 for Standard 835) (P/N 136578 for 835HD) |
Tires & Rims
| 255/70R 22.5 Continental Tires in lieu of Standard | |
|---|---|
| 255/70R 22.5 Michelin Tires in lieu of Standard | |
| Spare 255/70R 22.5 Double Coin Tire and Hub Pilot Type Rim | |
| Spare 255/70R 22.5 Continental Tire and Hub Pilot Type Rim | |
| Spare 255/70R 22.5 Michelin Tire and Hub Pilot Type Rim | |
| 22.5 Aluminum Wheel (10-bolt polished) in lieu of Standard (Each) | |
| 22.5 Aluminum Wheel (10-bolt machined) in lieu of Standard (Each) | |
| 22.5 Aluminum Wheel (10-bolt Dura-Brite) in lieu of Standard (Each) | |
| Hubometer | |
| Crossfire Air Equalizers (Price per axle) | |
| Pressure Guard Tire Inflation (Price per axle) N/A | |
| PSI Tire Inflation System (Price per axle) | |
| Shock Straps (Price per axle) | |
| Dust Shields (Price per axle) |
Paint & Special
| Hot Dip Galvanizing (Lower Deck and Trunnion) G/N Powder Coated only | |
|---|---|
| Hot Dip Galvanizing of Flip Axle Assembly | |
| Paint Over Galvanizing | Sides only of Lower Deck and Trunnion Slope with Standard Colors only |
Specifications
| Model | Capacity* | Base Weight | Length | Axles | Tires & Ply Rating |
|---|---|---|---|---|---|
| 845-48-AG | 45 Ton | 21,800 lbs. (+/- 3%) | 102″ | 2 | (8) 255/70R 22.5 LRH |
| 845-53-AG | 45 Ton | 23,000 lbs. (+/- 3%) | 102″ | 2 | (8) 255/70R 22.5 LRH |
| 845-53-AG-S60 | 45 Ton | Consult Factory | 102″ | 3 | (12) 255/70R 22.5 LRH |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Specifications subject to change without notice.
Disclaimer: Landoll has a corporate policy of continuous product improvement and development, therefore, specifications are subject to change without any advance notice. Landoll is not responsible for differences between the specifications or illustrations contained on literature, data sheets, website and actual equipment.
The information on any form of this website is intended only for the sole use of Landoll. We do not share or sell any of this information to third parties. This drawing and all information therein is property of Landoll and is confidential. It must not be made public or copied. This drawing is loaned subject to return upon demand and shall not be used directly or indirectly in anyway detrimental to our interest. Drawing illustrates standard equipment; optional equipment may change standard measurements.
Gallery
