Full-Featured CONTAINER Hauling
The 330D container trailer is designed with a solid, flat platform made with two main beams, and a rugged outer channel with a 3/8” skid plate and side rail built in. The full-width solid approach plate has four keyhole tie-downs. The 330D is also available in an optional single drop frame to haul high cube containers.
Versatile Full-Tilt Design
The tilt design provides load angle versatility that allows container placement with hydraulic control at all times. Adjust the load angle from 9° to 17° to accommodate different locations. Place containers right on target – beside buildings, in alleyways, or behind and within retail warehouses.
Easy Load & transport
Choose the optional Chain Drive Load System to load multiple boxes on the same load. Other standard equipment includes full 25,000-lbs. air-brake axle, spring brakes, and 255/70R 22.5 tires. Built with a rugged frame and heavy-duty components, it’s a trailer that will perform for years.
Features
Frame & General
Capacity* | 8 Ton (16,000 lbs.) |
---|---|
Deck Rating | 10,000 lbs. in 10′ |
Estimated Base Weight | 15,200 lbs. (48′) +/-3% |
Main Frame | Fabricated 80,000 PSI Yield Beams |
Crossmembers | 3-1/2″ x 3-1/2″ Tube on 18″ Centers |
Pin Setting | 30″ (18″ at 90° Drop) |
Swing Clearance | 72″ |
Deck Width | 102″ |
Loaded Deck Height | 42″ |
Decking | 1/8″ Steel Tread Plate, 5″ Cable Trough – Full Length, Formed Angle Skid Plate / Side 5/16″ x 12″ x 3-1/2″ |
Load Angle | 12° |
Tie Downs | (4) D-Rings – 2 per side, (4) 4″ Strap Ratchets Curbside with Opposing Hooks Street Side |
Parking Stands | Jost Two Speed Landing Gear |
Accessories | 29″ Approach Plate with 4 Keyhole Tie Downs, 1 Pair Adjustable Container Stops (N/A with 90° DD Frame Option), 1 Toolbox, (42″W x 28″ D x 9″H) |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Suspension & Undercarriage
Suspension | Transpro Mono Leaf, 25,000 lbs. Capacity |
---|---|
Undercarriage | (1) 4″ x 126″, Centralized Grease System; Powder Coated Black |
Axles | (1) 25,000 lb. Dual Tire, Oil Bath Bearings, Automatic Slack Adjusters Axles Prepped for Air Inflation |
Brakes | 16.5 x 7 Full Air / Spring Brakes ABS, 2S1M |
Tires | 255/70R 22.5 LRH Double Coin |
Rims | 22.5 x 7.50 Tubeless |
Wheels | Steel Hub Pilot |
Oil Seal Hubs | Internal Mated Assembly |
Hydraulics
Hydraulic Hook Up | Quick Couplers 2,500 PSI – 20 GPM at Controls, 50 GPM Max |
---|---|
Tilt Cylinders | (2) 6″ x 30″ |
Hydraulic Winch | 12,000 lbs. Worm Gear with Spring Tension and 85′ of 1/2″ Cable |
Hydraulic Valve Body | Rexroth |
Electrical
Air / Electrical | 7-Way Receptacle |
---|---|
Lights | Grote MicroNova® LED Clear Lens (10-Year Warranty) |
Wiring Harness | Grote “Xtreme” Wiring Harness (7-Year Warranty) |
Finish & Color
Finish | Steel Grit Shot Blast to Bright Metal |
---|---|
Powder Coat Color | White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue |
Decals | Hi-Visibility Reflective Package |
Options
Bulkhead
16″ / 24″ 2-Position Bulkhead / Front Extension (Solid) (1,500 lbs. loaded capacity, 3,000 lbs. distributed) Powder Coated Black | |
---|---|
48″ High Mesh 102″ Powder Coated Black | |
Bolt-On Binder Storage Rack for 48″ Bulkheads | |
Dual LED Work Lights (Mounted on Bulkhead) | |
Spare Tire Carrier 48″ Bulkhead, Front Mounted | |
Spare Tire Carrier 48″ Bulkhead, Rear Mounted |
Parking Stands
Pin Drop in lieu of Standard |
---|
Winch & Accessories
20,000 lbs. Winch in lieu of 12,000 lbs. | |
---|---|
Wireless Remote Control | Six Function |
Cable Roller Guide for Winch | |
Guard, Winch 12 / 20K (Cannot be used in conjunction with Pivoting Cable Roller Guide) | |
Dual Slope Rollers (Recommended for 90° Drop) | |
12,000 lbs. Capacity Gear Box Continuous Chain Drive System in lieu of Standard (Includes, P/N 135316, 129209, 129210 and Front Lock Pins) | |
Container Load Chain Assembly (P/N 135316) | |
Chain Connect / Container Assembly for Chain Drive (P/N 129209) | |
Container Pusher Assembly for Chain Drive (P/N 129210) |
Tie Downs
Extra Flush Mounted D-Rings (Each) | |
---|---|
D-Ring Bolt on at Winch (Each) | |
Extra Ratchet Winch for 4″ Nylon Strap (Weld-on, less strap) |
Upper Deck & Accessories
90° Drop in lieu of Straight | |
---|---|
Rub / Chain Rail | Web Mount (Price per foot of Rail) |
Under Deck Tool Box (42″W x 28″D x 9″H) | |
Light for Hydraulic Controls | |
Centering Boards (2 front, 2 rear) |
Suspension & Undercarriage
Air Ride in lieu of Spring Standard | |
---|---|
Low Load Angle 9-1/2° (48′ only) | |
Galvanized Bumper in lieu of Standard Painted Bumper |
Hydraulic Power Source
Wet Kit for Tractor (Includes 30 Gallon Steel Tank) | Shipped loose with trailer or factory installed |
---|---|
Hydraulic Quick Couplers 1 Male / 1 Female (Matches trailer) (P/N 105902) | |
Polished Aluminum Hydraulic Tank, (19″W x 24D”) (Side mount) in lieu of Standard | |
Hydraulic Engine Package | Upper Deck with Cover Kohler EFI 25 HP Gas Under Deck Mount, Kohler EFI 25 HP Gas |
Tires & Rims
255/70R 22.5 Michelin Tires in lieu of Standard | |
---|---|
235/75R 17.5 Double Coin Tires in lieu of Standard 22.5 | |
Spare Double Coin Tire and Hub Pilot Type Rim (235/75R 17.5) | |
Spare Double Coin Tire and Hub Pilot Type Rim (255/70R 22.5) | |
Spare Michelin Tire and Hub Pilot Type Rim (255/70R 22.5) | |
Hubometer | |
Pressure Guard Tire Inflation N/A |
Paint & Special
Hot Dip Galvanizing (Trailer frame is totally submerged) | Adds minimum of 3 weeks to delivery |
---|---|
Paint Over Galvanizing | Top surface only with Standard Colors only Sides only with Standard Colors only |
Special Paint | Contact factory |
Specifications
Model | Capacity* | Base Weight | Deck | Axles | Tires & Ply Rating |
---|---|---|---|---|---|
330D-1-42 | 8 Ton | 12,200 lbs. (+/- 3%) | 102″ x 42′ | 1 | (4) 255/70R 22.5 Double Coin |
330D-1-48 | 8 Ton | 15,000 lbs. (+/- 3%) | 102″ x 48′ | 1 | (4) 255/70R 22.5 Double Coin |
330D-1-50 | 8 Ton | Consult Factory | 102″ x 50′ | 1 | (4) 255/70R 22.5 Double Coin |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Specifications subject to change without notice.
Disclaimer: Landoll has a corporate policy of continuous product improvement and development, therefore, specifications are subject to change without any advance notice. Landoll is not responsible for differences between the specifications or illustrations contained on literature, data sheets, website and actual equipment.
The information on any form of this website is intended only for the sole use of Landoll. We do not share or sell any of this information to third parties. This drawing and all information therein is property of Landoll and is confidential. It must not be made public or copied. This drawing is loaned subject to return upon demand and shall not be used directly or indirectly in anyway detrimental to our interest. Drawing illustrates standard equipment; optional equipment may change standard measurements.