Landoll’s innovative trailer solutions directly impact the paving industry with a Detachable series of Lowboy trailers. These trailers are designed to make your driver’s job safer, simpler, and more productive.


Drivers need flexibility while loading. With bigger equipment, it’s necessary to make loading onto the lower deck trouble-free. From a clean assist ramp for larger equipment to the fully Hydraulic Power Ramp loading forklifts, pavers and rollers, Landoll gives you the ability to load just about anything just inches from the ground.

Patented Neck

Landoll’s patented neck has a single hydraulic function. It uses one hydraulic lever to fully detach and carry the neck away from the lower deck. Reconnecting is just as easy. Back up and the alignment wedge centers the neck and the “A” frame load carrier relocks the lower deck and lifts the trailer to transport position. Choose one of seven ride heights to adjust to the proper transport position.

Safety, High-Visibility Lighting

Landoll, working in collaboration with Grote Industries, offers new LED diode maker lights to maximize the luminous output with up to 22 lights on every trailer. The rear-facing DOT lights have also been enhanced by adding the fourth tail-turn light to the mud flap bracket. This High-Visibility Light Package substantially increases awareness and is standard equipment on all 400 and 800 series trailers.

Get the most from your equipment dollars, work safely at night, and get the highest return on your investment with a Landoll Detachable or Traveling Axle Trailer from the world leader in equipment trailers – Landoll.


Frame & General

Capacity* 35 Ton (70,000 lbs.)
Deck Rating 70,000 lbs. in 12′
Estimated Base Weight 17,740 lbs. (51′)
Main Frame Fabricated 11-3/8″, 100,000 PSI Flange
Crossmembers 6″ High Tensile I-Beams on 21-3/4″ Centers
Gooseneck 11’9″ with 7 Position Fifth Wheel Ride Height
Pin Setting 15″
Swing Clearance 84″
Hitch Fifth Wheel Type Automatic Gooseneck Lock Engagement with Lock / Unlock Visual from Tractor Cab
Deck Width 102″
Loaded Deck Height 18″
Loaded Ground Clearance 6.5″
Decking 1-1/2″ Nominal, Apitong Track Area
Accessories 3rd Axle Ready, 12″ Swing-Out Outriggers; Half Front Bolster with Traction Bars, Lowered Bolster between Tires, HD Sloped Front Approach with Traction Bars, Open Boom Trough with V-Type Bumper
Storage Area 1-Between Main Frame at Rear of Lower Deck (41″W x 21″L x 6″D)
Tie Downs 22 Total, All Angled “D” Rings
Pivots for Manual Ramps, Double Outrigger Bracket & D-Ring (P/N 209999)
Assist Ramp (Pin Front Approach) (P/N 209999, P/N 210000, P/N 213373)

* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Suspension & Undercarriage

Suspension Neway RLU250 Air Ride 25,000 lbs. Capacity Mechanical Ride Height Control Valve
Grease Centralized Grease System
Axles 2-25,000 lbs. Dual Tire, Oil Bath Bearings; 50″ Spacing; Prepped for Air Inflation
Brakes 16.5 x 7 Full Air / Spring Brakes ABS 4S/2M
Tires 255/70R 22.5 LRH Double Coin
Rims 22.5 x 8.25
Wheels Steel Hub Pilot
Oil Seal Hubs Internal Mated Assembly


Hydraulic Hook Up Quick Couplers 2500 PSI/20 GPM @ Controls; 50 GPM Max
Cylinders Main Gooseneck Cylinders Horizontally Mounted


Air / Electrical Glad Hand / 7-Way Receptacle
Lights Grote MicroNova® LED Clear Lens (10-year warranty)
Wiring Harness Grote “Xtreme” Wiring Harness (7-year warranty)
Strobing Light Package in Bumper (Each) one required for trailer, one for Flip

Finish & Color

Finish 400 Degree Bake/Steel Grit Shot Blast to Bright Metal
Powder Coat Color White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue
Decals Hi-Visibility Reflective Package



10’9″ Gooseneck with 72″ Swing Clearance, Shortens Overall Length of Trailer
Gooseneck Liquid Filled Weight Gauge
Fenders for 11’9″ Gooseneck
Fenders for 10’9″ Gooseneck
Aluminum Cover Plate (HD 1/8″ x 80″ long) (P/N 168531)
Gooseneck LED Lights (2 stop / turn and 1 white work light) (Per side)
Gooseneck Mud Flaps
Bolt-On Chain and Binder Rack Between Lock Arms

Front Approach

24″ Flip Over Ramp (Construction style) Includes Pivot Pins (P/N 209999, P/N 210000, P/N 210001)
Bi-Fold Paver Ramp (Paver style, track area) Includes Pivot Pins (P/N 209999, P/N 180837)
Center Aluminum Wood Filled Ramps with Gooseneck Storage Rack (2) (P/N 182125)
Electric over Hydraulic Power-Lift Full Width Ramp (Extra crossmembers recommended)

Rear Trunnion

Boom Trough Cover (Not available with PC-Combo, Center Filler for Trunnion)
Flip Third Axle Assembly (60″ Axle Spacing)
Provision for Hydraulic Flip (Adds components for Rear Trunnion and Bumper)
Hydraulic Flip for Flip Axle Assembly
Full Covered Wheel Area (1/8″ Tread Plate) (Non-weight bearing) Boom Trough Remains Open
Full Covered Wheel Area 1/4″ Plate (Weight bearing) Boom Trough Remains Open
Steel Bolt-On Wheel Covers (Per axle) (Weight bearing) for 255 70R 22.5 only
Bolt-On Poly Fenders (2 axle) (Non-weight bearing)
Bolt-On Poly Fenders For Flip
Paver Slope Filler for Rear Trunnion
Removable Center Fill Deck for Boom Trough


Swing-Out Outrigger Plank, 1 set of 4 Boards 2 3/4″ T x 5″ W x 84″L (P/N 163580)
Outrigger Plank Storage Lock Downs

Tie Downs

Extra Flush Mounted D-Rings
Extra Flush Mounted Angled D-Rings

Deck & Accessories

Center Filled Wood Deck Apitong
Additional Center Storage Area Center Lower Deck
Lockable Hinged Cover for Storage Area
3/8 x 3-1/2 Double Keyhole Strap Full-Length Lower Deck on Each side (For 3/8″ chain only)
Extra Crossmembers Full Width

Suspension & Undercarriage

Air-Weigh Digital Scale System Loadmaxx Plus
Air-Weigh Digital Scale System Quickload Plus


Magnetic LED Amber Warning Lights (360-degree flashing, battery powered)
Battery Back-up for Strobe Lights

Hydraulic Power Source

Wet Kit for Tractor (Includes 30 Gallon Steel Tank) – Shipped loose with trailer or factory installed
Polished Aluminum Hyd Tank (19″W x 24″D) (Side mount) in lieu of Standard
Hydraulic Quick Couplers 1 Male/1 Female (Matches trailer)
11 HP Honda Engine Pkg Gooseneck mounted with Cover (Net 10.2 HP)

Tires & Rims

255/70R 22.5 Continental Tires in lieu of Standard (Price per axle)
255/70R 22.5 Michelin in lieu of Standard (Price per axle)
Spare 255/70R 22.5 Double Coin Tire & Hub Pilot Type Rim
Spare 255/70R 22.5 Continental Tire & hub Pilot Type Rim
Spare 255/70R 22.5 Michelin Tire & Hub Pilot Type Rim
22.5 Aluminum Wheel (10 bolt polished) in lieu of Standard (Each)
22.5 Aluminum Wheel (10 bolt machined) in lieu of Standard (Each)
22.5 x 8.25 Aluminum Wheel (10 bolt Dura-Brite) in lieu of Standard (Each) (Available with Steel Inner only)
Crossfire Air Equalizers (Price per axle)
PSI Tire Inflation System (Price per axle)
Shock Straps (Price per axle)
Dust Shields (Price per axle)

Paint & Special

Hot Dip Galvanizing (Lower Deck and Trunnion) G/N Powder Coated only
Hot Dip Galvanizing of Flip Axle Assembly
Paint over Galvanizing-Sides only of Lower Deck and Trunnion Slope with Standard Colors only


Model Capacity* Base Weight Length Deck Axles Tires & Ply Rating
835-27-47 35 Ton Consult Factory 47′ 102″ x 26′ 7″ 2 (8) 255/70R 22.5 LRH
835-30-50 35 Ton Consult Factory 50′ 102″ x 29′ 7″ 2 (8) 255/70R 22.5 LRH
835-32-52 35 Ton Consult Factory 52′ 102″ x 31′ 7″ 2 (8) 255/70R 22.5 LRH
835-23-44 35 Ton Consult Factory 44′ 102″ x 22′ 7″ 2 (8) 255/70R 22.5 LRH
835-27-48 35 Ton Consult Factory 48′ 102″ x 26′ 7″ 2 (8) 255/70R 22.5 LRH
835-30-51 35 Ton Consult Factory 51′ 102″ x 29′ 7″ 2 (8) 255/70R 22.5 LRH
835-32-53 35 Ton Consult Factory 53′ 102″ x 31′ 7″ 2 (8) 255/70R 22.5 LRH

* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice.

Disclaimer: Landoll has a corporate policy of continuous product improvement and development, therefore, specifications are subject to change without any advance notice. Landoll is not responsible for differences between the specifications or illustrations contained on literature, data sheets, website and actual equipment.

The information on any form of this website is intended only for the sole use of Landoll. We do not share or sell any of this information to third parties. This drawing and all information therein is property of Landoll and is confidential. It must not be made public or copied. This drawing is loaned subject to return upon demand and shall not be used directly or indirectly in anyway detrimental to our interest. Drawing illustrates standard equipment; optional equipment may change standard measurements.