Drexel Forklift

Drexel Forklift

Drexel Forklift

Model SL60AC/SL80AC

SL60-80-Aisle
Drexel-SL80-Side-View
Drexel-SL50-Steering
Drexel-SL80-Aisle-1
Drexel-SL80-Back-View
Drexel-SL80-Aisle-3
Drexel-SL80-Aisle-2
previous arrow
next arrow
 
SL60-80-Aisle
Drexel-SL80-Side-View
Drexel-SL50-Steering
Drexel-SL80-Aisle-1
Drexel-SL80-Back-View
Drexel-SL80-Aisle-3
Drexel-SL80-Aisle-2
previous arrow
next arrow

Drexel SwingMast® Front Wheel Drive, Rear Wheel Steer VNA and Side Loading Forklift

VIEW LITERATURE
PRINT LITERATURE

Contact Forklift Sales

The Drexel model SL60AC and SL80AC are high capacities SwingMast® models that work in aisles as narrow as 66″ (1.7M), have a basic capacity of 6,000 lbs. (2722kg), and up to 8,000 lbs. (3629kg) at 24″ (600mm) load center and have lift heights available to 289” (7.34M).

The SL60AC and SL80AC are 4-Wheel SwingMast® VNA and Side Loading forklifts with independently driven front wheels and dual rear steer tires. The front mast rotates 90°, has side shift of 30” (762mm), allows easy stacking in Very Narrow Aisles. Both can work inside and outside on paved surfaces and can perform the jobs of high capacity front loading and side loading forklifts including working in bulk storage, cantilever rack, push-back rack, double deep and climbing steep ramps. The SL range does the jobs of reach and counterbalanced trucks in aisles over 40% smaller. The ability to store and transport heavy long loads as a side loader increases versatility and maximizes utilization.

Exceptional Performance and Maneuverability

The SL60AC and SL80AC’s fast lift/lower and travel speeds with a tight turning radius provide excellent maneuverability and productivity. The optional roll-out battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four-stage masts are available for a wide range of applications including those with low overhead obstructions requiring high lift heights. Wire Guidance is a standard option on this model allowing safe, full-speed travel in the narrowest aisles.

Maximizes Material Handling Productivity

The versatile SL60AC and SL80AC forklifts replace conventional reach and counterbalanced fork trucks in standard warehouse pallet-handling operations. The unique design allows operators to use it as a counterbalance truck indoors or out, operates in very narrow aisles in the warehouse, and replace reach and counterbalanced trucks that require much wider aisles. The operator’s compartment is offset providing a wide, long load-carrying side deck to be used as side loaders. The front tires are 20″ (508mm) diameter and the rear/steer tires are 16.25” (413mm) dia. providing great under clearance for avoiding floor obstructions. The rear steer axle is articulated to provide a smooth ride over rough floor conditions.

  • 6,000 lb. (2722kg) and 8,000 lb. (3629kg) Capacities at 24″ (600mm) Load Center
  • Four-Wheel Design, Independently Driven Front Drive Wheels and Dual Rear Steering Wheels Provide Excellent Maneuverability and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Dual Joysticks Control all Hydraulic Functions
  • Hydrostatic Power Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Adjustable Suspension Seat Improves Operator Comfort
  • Large Battery Compartment Allows Maximum Battery Capacity for Long Run Times
  • High Visibility Mast Allows Optimum Safety and View of Loads and Forks
  • AC and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High Efficiency Curtis SEPEX Controllers Provide Trouble-Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 80 Volt Electrical System

Standard Specifications

  • Four-Wheel Configuration – 6,000 lb. (2,722kg) and 8,000 lb. (3,629kg) Capacity
  • 72 Volt Electrical System
  • Curtis SEPEX Dual Traction Motor Controllers
  • Curtis Series Hydraulic Motor Controller
  • Battery Discharge Indicator with Lift Interrupt
  • Hydrostatic Power Steering
  • 30” (762mm) of Shift-Includes 3” (76mm) of Reach
  • 40” (1,016mm) Long Shank Forks with Standard Taper
  • Poly Drive and Steer Tires
  • 42” (1066mm) High Load Backrest
  • Type E Construction
  • Anderson SBX350 Green Connector
  • Seat Belt (Retractable)
  • Horizontal Fork Indicator, Overhead Guard
  • Key Switch, Hand Parking Brake and Hour Meter
  • Meets ANSI B56.1

Optional Equipment

  • EE Construction (Includes Battery Side Cover)
  • Non-Standard Fork Lengths
  • Dual Overhead Guard Mounted LED Headlights
  • Dual Rear Safety LED Light Bars
  • Safety Flashing LED Light
  • Backup Alarm – Beeping Tone (“smart” dB adjusting)
  • Fire Extinguisher – OHG Post Mounted
  • Cold Storage Conditioning to -22° F (-30° C)
  • Roller Slide-Out Battery Tray
  • Lazer Fork Height Indicator
  • Fork Positioner
  • Keyless Key Pad On-Off
  • Long Load Handling Package
  • Auxiliary Hydraulics
  • Overload Sensor with Alarm

Model Specifications

Specifications Sheet

Related Equipment