Home > Products > Material HandlingBendi Forklifts > B40AC-DR/B50AC-DR

Bendi Forklift

Home > Products > Material HandlingBendi Forklifts > B40AC-DR/B50AC-DR

Bendi Forklift

Home > Products > Material HandlingBendi Forklifts > B40AC-DR/B50AC-DR

Bendi Forklift

Model B40AC-DR B50AC-DR

B40DR-Aisle
B40ACDR
2016-Bendi-B40AC-DR--DeepReach-ForksExtended
Model B40AC-DR B50AC-DR Video
 
previous arrow
next arrow
 
B40DR-Aisle
B40ACDR
2016-Bendi-B40AC-DR--DeepReach-ForksExtended
Model B40AC-DR B50AC-DR Video
previous arrow
next arrow

Bendi Rear Wheel Drive Narrow Aisle Deep Reach Multipurpose Electric Forklift

VIEW LITERATURE
PRINT LITERATURE

Contact Forklift Sales

The Bendi model B40AC-DR / B50AC-DR will stack loads two deep in aisles as narrow as *96” (2.4 M) has a basic starting capacity of 2,500 lbs. (1,136 kg) at 24” (600 mm) load center and has lift heights available to 35′ 5″ (10.80 M). The reach from face to mast is 52” (1,321 mm) and the integral pantograph reach stroke is 41” (1,041 mm) The B40AC-DR / B50AC-DR has a 33” (838 mm) wide tilting and side shifting fork carriage.

The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The B40AC-DR / B50AC-DR can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-DR / B50AC-DR provides exceptional control and makes load placement and retrieval superior to the competition.

3-Stage Mast

The new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 48” (1,219 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance. Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.

*Based on 48” (1200mm) long x 40” (1000mm) wide load.

  • 2,500 lb. (1,136kg) and 3,000 lb. (1,364kg) Capacity at 24″ (600mm) Load Center
  • Four-Wheel Design, Dual Rear Wheel Drive
  • Integral 8″ (200mm) Stroke Sideshifter and 36″ (914mm) High Load Backrest
  • Hydraulic Power Steering – Front Wheel Steer
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • AC Traction and Hydraulic Motors Ensure Minimal Maintenace and High Efficiency
  • High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 48 Volt Electrical System
  • Optional Cold Storage Conditioned to -22°F (-30°C)

Standard Specifications

  • Four Wheel Design, Dual Rear Wheel Drive
  • 8” (200 mm) Stroke Integral Side Shifter
  • 41” (1041 mm) Stroke Integral Pantograph Reach
  • 52” (1321 mm) Reach From Face of Mast
  • 33” (838 mm) Wide Tilting and Side Shifting Fork Carriage
  • Adjustable Seat and Steering Wheel
  • Rotation via DuraSteerTM Actuator, with 5-Year Warranty on Articulation
  • Dual Curtis AC Traction Motor Controllers
  • Curtis AC Hydraulic Motor Controller
  • Battery Discharge Indicator with Slow Alert
  • Hydraulic Disk Brakes
  • “Floating” Articulated Front Axle
  • One Parts and Operator’s Manual Included
  • Curtis Engage Dash Display
  • Hand Actuated Parking Brake
  • 36” (914mm) High Backrest
  • High Visibility Mast
  • 170˚ Rear View Mirror
  • Safety Seat Switch and Seat Belt
  • Fixed Mast with Carriage Tilt of 3º Fwd / 4º Rwd
  • 48 Volt Electrical System
  • Three Section Hydraulic Control Valve
  • Smooth Rubber Drive Tires
  • Soft Polyurethane Load Wheel Tires
  • 40” Tapered Tip Forks – Rear Tow Hitch Pin
  • Meets ANSI B56.1

Optional Equipment

  • Non-Standard Fork Lengths
  • LED Headlights, Flashing Light and Rear Safety Lights
  • Non-Marking Tires
  • Vinyl Seat
  • Slide-Out Sideways Battery Tray
  • Fire Extinguisher
  • Lazer Fork Height Indicator
  • Carriage Mounted Camera with Operator Compartment Monitor
  • Capable of Freezer Operation to -22°F (-30°C)

Model Specifications

Specifications Sheet

Related Equipment

PT40

LSC25/LSC30

FL40-60EX

R60i5

SL120

SL60AC/SL80AC

SL40AC/SL50AC

SLT30AC/SLT35AC

B40i5

B55AC

B40AC-HL/B50AC-HL

B30AC/B40AC

B3/30AC