Traveling Axle Trailer

Traveling Axle Trailer

Traveling Axle Trailer

Traveling Axle Model 343A

previous arrow
next arrow
previous arrownext arrow
Slider

Landoll’s all new Model 343A brings together decades of experience from working in the storage container industry. Today’s demands to move standard ISO 20′ and 40′ boxes are easy.

VIEW LITERATURE
PRINT LITERATURE

Contact Trailer Sales

The Complete Container Transporter

Landoll’s all new Model 343A brings together decades of experience from working in the storage container industry. Today’s demands to move standard ISO 20′ and 40′ boxes are easy. However, add the ISO and domestic high-cube along with the never-ending customized lengths of boxes to an application, and you need a trailer that can move them all. The Model 343 will do just that.

The 343A is available in 43′, 46′, or 50′ models. The 43′ gives the operator the greatest maneuverability while handling up to a 45′ high cube**. If you are needing to handle 48′ boxes, choose the 46′ model. If you have domestic 53′ high cube boxes in your fleet, then choose the 343A-50**. Match the length with the containers you are moving.

Flexibility to Choose

The 343A is standard with the Chain Drive Load System but if your drivers like a winch cable system, then choose from a 12,000 or 20,000 lb. Warn winch. The trailer stays the same, you choose how you want to load boxes. The standard handling package is also complete with a chain loading bridle, rear tie-downs/binders and push bar. There is a standard inside corner casting guide, and you can choose to add two-position outside guide panels. The optional side guide panels have an inside position for guiding 96″ wide boxes. With an optional bolt-on panel bushing, you can position the guide panels to the outside to guide 102″ high cube boxes.

Frame and Features

  • *Capacity: 10,000 lbs.
  • Deck Rating: 10,000 lbs. in 10′
  • Estimated Base Weight: 16,000 lbs. (50′) +/-3%
  • Main Frame: Fabricated 80,000 PSI Yield Beams
  • Crossmembers: 3″ Jr. I Beam on 12″ and 24″ Centers
  • Pin Setting: 43″ Set-Back, 75″ CA Tractor Minimum; 18.5″ Setting
  • Swing Clearance: 78″ Rear and Forward Swing Clearance
  • Deck Width: 102″
  • Loaded Deck Height: 45″ at Rear Approach Plate
  • Decking: 1/8″ Steel Tread Plate, 10″ Recessed Trough – Full Length, Skid Plate 10″ Wide / Side Outer Frame 6-1/2″ Tall, 4″ Bottom Flange
  • Load Angle: 12°
  • Accessories: Inner Receiver Bushing on 24″ Centers for Side Guides, Hi-Cube Container Low-Profile, Centralized Grease System, Two Stage Powder Coat Paint, 29″ Approach Plate with (4) Keyhole Tie Downs and Shoe Lock Down Slots, Wireless Remote Control Hydraulics
  • Tool Box: (1) Street, (1) Curb Side; 42″W x 28″D x 9″H with Lockable Door
  • Tie Downs: Double Keyhole Chain Slots 24″ Centers on Outer Beam
  • Parking Stands: Jost Two Speed Landing Gear

Supspension and Undercarriage

  • Suspension: Neway Air Ride RLU228, 22,500 lb. Capacity
  • Axles: (1) 25,000 lbs. Dual Tire, Oil Bath Bearings (RTAC Legal Width), Automatic Slack Adjusters
  • Axles Prepped for Air Inflation
  • Brakes: 16.5×7 Full Air / Spring Brakes, ABS 2S1M
  • Tires: 255/70R 22.5 LRH Double Coin
  • Rims: 22.5×8.25 Tubeless
  • Wheels: Hub Pilot Wheel / Steel Outboard Brake Drum
  • Oil Seal Hubs: Internal Mated Assembly

Hydraulics

  • Hydraulic Hook Up: Quick Couplers 2,500 PSI – 20 GPM at Controls, 50 GPM Max
  • Hydraulic Winch: Gear Box, 12,000 lb., with Continuous Power Chain Drive Load System 1/2″ Chain
  • Hydraulic Valve Body: Rexroth

Electrical

  • Air / Electrical: 7-Way Receptacle
  • Lights: Grote Clear Lens LED with Chrome Bezel (10-Year Warranty)
  • Wiring Harness: Grote “Xtreme” Wiring Harness (7-Year Warranty)
  • Turn Signal: Center Mounted Turn Signal

Finish and Color

  • Finish: Steel Grit Shot Blast to Bright Metal
  • Powder Coat: TGIC Polyester Powder Coat, White / Black / Yellow / Blue / Red / Green / Sapphire Blue / Dark Gray
  • Decals: Hi-Visibility Reflective Package

Parking Stands

  • Pin Drop in Lieu of Standard

Winch and Accessories

  • CHAIN DRIVE LOAD SYSTEM INCLUDES:
    • 12,000 lb. Gear Box Chain Drive System
    • Chain and Grab Hook Assembly 42″ x 1/2″
    • Pusher / Dozer Blade
    • Chain Connector
    • Container Load Bridle
    • Double Container Stops (Hold Down Between 2 – 20′)
    • Container Stop Front / Hold Down (Lock in Bridle)

    OPTION IN LIEU OF ABOVE STANDARD

    • 12,000 lb. Warn Planetary Winch, 2 Speed, with Air Release
    • Container Load Bridle
    • Container Stops, Front / Hold Down (Lock into Bridle)

    OPTION IN LIEU OF ABOVE STANDARD

    • 20,000 Lb. Warn Planetary Winch, 2 Speed, with Air Release
    • Container Load Bridle
    • Container Stop, Front / Hold Down

Tie Down

  • 3/8″ x 12’6″ Chain with Rear Container Hold Down (1 Pair)
  • Load Binder 3/8″ Ratchet Style (1 Pair)
  • (1) Pair Lock Pins for Front Lockdowns (Mounted on Front Cross Tube)
  • (1) Pair Shoe Lock Tie Down for Approach Plate

Deck and Accessories

  • Side Guide Anchors (Bolt-On) (1 Pair)
  • Side Container Guide Panels (1 Pair) 40″ x 4″
  • Chain and Grab Hook Assembly 42″ x 1/2″
  • (1) Pair Shoe Lock Tie Downs for Rear Corner Casting
  • Aluminum Ladder LH Front Mounted
  • Aluminum Ladder RH Front Mounted
  • Toe Board 3/8″ x 2-1/2″ on Outside of Skid Plate
  • Bolt-On Strap Ratchet and Hook Assy
  • Special Side Pin Container Stop Lock Assy (Ref 19993)(1-Frt, 1-40′, 2-20′ Includes All Pins)

Suspension and Undercarriage

  • Galvanized Bumper in Lieu of Standard Painted Bumper

Hydraulic Power Source

  • Wet Kit for Tractor (Includes 30 Gallon Steel Tank)
    • Shipped Loose with Trailer or Factory Installed
  • Hydraulic Quick Couplers 1 Male / 1 Female (Matches Trailer)
  • Polished Aluminum Hydraulic Tank, (19″W x 24D”) (Side Mount) in Lieu of Standard
  • Hydraulic Engine Package, Front Mounted Over Gear Box / Winch with Cover Kohler EFI 25 HP Gas

Tire and Rims

  • 255/70R 22.5 Michelin Tires in Lieu of Standard
  • 235/75R 17.5 Double Coin Tires in Lieu of Standard 22.5
  • Spare Double Coin Tire and Hub Pilot Rim (235/75R 17.5)
  • Spare Double Coin Tire and Hub Pilot Type Rim (255/70R 22.5)
  • Spare Michelin Tire and Hub Pilot Type Rim (255/70R 22.5)
  • Hubometer
  • Pressure Guard Tire Inflation N/A

Paint and Special Options

  • Hot Dip Galvanizing (Trailer Frame Totally Submerged) – Adds Minimum of 3 Weeks to Delivery
  • Paint Over Galvanizing – Top Surface Only Inside of Skid Plate with Standard Colors Only
  • Paint Over Galvanizing – Outer Skid Plate and Sides Only with Standard Colors Only
  • Special Paint Color

Specifications Table

Model Capacity Base Weight Length Axles Tires and Ply Rating
Model Capacity Base Weight Length Axles Tires and Ply Rating
343A-39 5 Ton Consult Factory 102″x39′ 1 (4) 255/70R 22.5 LRH
343A-43 5 Ton Consult Factory 102″x43′ 1 (4) 255/70R 22.5 LRH
343A-46 5 Ton Consult Factory 102″x46′ 1 (4) 255/70R 22.5 LRH
343A-50 5 Ton 16,00 lbs. (+/- 3%) 102″x50′ 1 (4) 255/70R 22.5 LRH

Line Drawing

Printable Line Drawing

343TrailerLineDrawings-LD343_178662-0419

*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

**A FIFTH WHEEL HEIGHT OF 45″ IS REQUIRED WHEN HAULING HIGH-CUBE CONTAINERS 

Specifications subject to change without notice.

Related Equipment

Model 440B

Model 455B

Model 317E

Model 318E

Model 330D-1

Model 330D-2

Model 345F

Model 325C

Model 326C

Model 327C

Model 329C

Model 825E-AG

Model 835E-AG

Model 845E-HD-AG

Model 835E-Construction

Model 835E-PS Paver

Model 835E-PC Combo

Model 855E Construction

Model 855E-PS Paver

Model 855E-PC Combo

Model 930E

Model 950E

Model 302C-B

Model 302D-B

Model 305D-B

Model 312D-B

Model 313D-B

Model 314D-B

Model 135C

Model 150C

135 CSY GSA

Loadoll II

Model LT1016A

Model LT1016A+4

Model LT1020A

Model LT1216+4

Model LT1220

Model LT1420A / LT1422A

Model L2024A

Model L2424A

Model L4024A

Model L5029A

Model 860-CE