The Latest Landoll Addition

Staying true to what Landoll does, bringing maximum flexibility to our low deck height detachable series. The engineered extension beams create 4 different positions.

Model Options Standard Length Extended Length 1 Extended Length 2 Extended Length 3
48′ 48′ 50-1/2′ 53′ 56′
53′ 53′ 55-1/2′ 58′ 61′

Low ride with 6″ Ground clearance

The 850XT shares features from the current Landoll 800 series and provides loadable low deck height all the way to the rear bumper. Having ride height adjustments in the gooseneck and rear trunnion, provides much needed compliance on the job site. Staying with the industry’s easiest gooseneck attachment, getting those challenging loads doesn’t seem challenging anymore.

Quick Load & Unload of large equipment

Featuring the industry’s best load angles and frame clearances, the 850XT is up for the challenge. Engineered meticulously for low ground clearance loads, like buses, RV coaches, firetrucks, and more. Landoll is here to help you get the job done while others simply do not have the right tool for the job.

Photos may show optional features.

Features

Frame & General

Capacity* 50 Ton (100,000 lbs.) (Capacity Reduces During Extending)
Deck Rating 100,000 lbs. in 16′
Estimated Base Weight 53′ – 24,000 lbs.(+/-3%)
Main Frame Fabricated Box Beam, 100,000 Yield PSI Flange
Crossmembers 6″ High Tensile I-Beams on 21″ Centers
Gooseneck 12″ Outriggers for 24′ Main Deck
Pin Setting 15″ Pin Setting
Swing Clearance 84″ Swing Clearance
Hitch 2″ Hitch Receiver with Electrical Outlet for Accessory Lights
Deck Width 102″
Loaded Deck Height 22″
Loaded Ground Clearance 6″
Decking 42″ Deck Behind Rear Axle With Loading Angle and Boom Through
Accessories Arctic Components
Storage Area 1 – Located Rear of Lower Deck; 1 – Located Behind Rear Axle; Easy Access Side Door Storage in Bolsters; Chain and Block Box at Rear of Main Deck Between Main Beams
Tie Downs Perimeter Outer Flange Keyhole Gotchas; Center Main Deck Keyhole Tiedowns – 21″ Centers; (33) Total – Angled and Flush Mounted D-Rings; Neck: D-Rings 2 Each on Main Frame Rear Flush Mounted; Trunnion: D-Rings 2 Each Flush Mounted Front and Rear on Top of
Inner Beams, 1 Each Angled on Bolsters Between Axles; Lower Deck: Web Mounted on 42″ Centers
Bolsters Quarter Front Bolster with Quick-Lift Drive Over Ramp; Weight Bearing Bolsters Between Axles with Storage

* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Suspension & Undercarriage

Suspension DEXTER Air Ride Suspension with 25,000 lbs Capacity Axles
Grease Centralized Grease System
Axles 3 – 25,000 lbs. Dual Tire, Oil Bath Bearings; 60″ Axle Spacing, Automatic Slack Adjusters – All Axles, Drum Brakes
Brakes 12.25 x 7.5 Full Air with Spring Brakes ABS, 4S2M
Height Adjustment Air Raise and Lowering Valve with Quick Dump
Tires 245/70R 17.5 Michelins
Rims 17.5 x 6.75 Tubeless

Hydraulics

Hydraulic Hook Up Quick Couplers 2500 PSI/20 GPM @ Controls; 50 GPM Max

Electrical

Lights Grote Clear Lens LED With Shock Absorbing Surround (10-year warranty)
Wiring Harness Grote “Xtreme” Wiring Harness (7-year warranty)
Outlet 7 Prong Blade Electric Outlet at Rear for Accessory Lighting
Strobing Light Package in Bumper

Finish & Color

Finish 400 Degree Bake/Steel Grit Shot Blast to Bright Metal
Primer Zinc Rich Powder Primer
Powder Coat TGIC Polyester Powder Coat White, Black, Yellow, Blue, Red, Green,
Sapphire Blue, Dark Gray

Options

Gooseneck

Gooseneck Bed Assembly, Aluminum or Steel
Gooseneck Aluminum Cover Plate
Battery Back-Up for Detached Lighting
Bolt-On Chain and Binder Rack Between Lock Arms
Gooseneck Mud Flaps
Gooseneck Taillight and Work Lights
Fenders for Gooseneck
20,000 / 30,000 lb Winch In-Deck Mount (Mid and / or Rear), Gooseneck Mounted
Bus Ramps – Front and Rear Combination (4 Pieces)
Shock Straps
Air Lift on 2nd or 3rd Axle
Air Outlets

Crossmembers

Extra Crossmembers

Deck And Features

Center Filled Wood Deck – Apitong

Storage Area

Single or Dual Load Bearing Toolboxes Located at Front of Lower Deck

Suspension / Axles

Air-Weigh Scale Options
Right Weigh Scale

Brakes

Air Disc Brakes

Tires

235/75R 17.5 Double Coin on 17.5 x 6.75 Tubeless Rims
Meritor / PSI Tire Inflation

Lights

Gooseneck Mounted Work Lights
Trunnion Lighting

Finish / Color

Galvanizing

Specifications

Model Capacity* Base Weight Deck Axles Tires & Ply Rating
850XT-48′ 50 Ton TDB 102″ x 48′ 3 (12) Continental HTR2 235/75R17.5
850XT-53′ 50 Ton 24,000 lbs (+/- 3%) 102″ x 53′ 3 (12) Continental HTR2 235/75R17.5

* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice.