Maximize Payload and Profitability
The 930 Traveling Tail is part of the 900 Series trailers. The tail is capable of lifting 24,000 lbs up to 53″ dock height. Maximize your loads by utilizing the entire deck and maximize your payload by having the undercarriage five feet behind the main hinge. The longer wheelbase gives you proper weight distribution between tractor and trailer and fully supports the tail.
The traveling tail concept allows for stable dock loading and increases your payload by having a longer wheelbase.
Why Own a 900 Series
Quick, simple, safe operation and a longer wheelbase that increases payload. A 15′ tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 E-Series trailers. The tail can raise and lift 24,000 lbs up to 57″ dock height. The 900 Series trailers are backed by a 5-year structural warranty.
Work with Ease
The low-load tail angle ensures easy clearance for loading low-sitting equipment, providing seamless loading capabilities. The hydraulic control allows for efficient and convenient loading and unloading operations, all managed through a single control point.
Features
Frame & General
| Capacity* | 35 Ton (70,000 lbs.) |
|---|---|
| Deck Rating | 50,000 lbs. in 10′ |
| Estimated Base Weight | 16,300 lbs. (48′) +/-3% |
| Main Frame | Fabricated 80,000 PSI Yield 4-Beam Design |
| Crossmembers | 4″ Junior I-Beam and 3″ Junior I-Beam on 8″ Centers |
| Slope Drop | 90° |
| Parking Stands | Jost Two Speed Landing Gear |
| Pin Setting | 18″ |
| Swing Clearance | 84″ |
| Hitch | Fifth-Wheel Kingpin |
| Deck Width | 102″ |
| Loaded Deck Height | 38″ |
| Loaded Ground Clearance | 20″ |
| Decking | 1-3/8″ Nominal Apitong (Lower Deck) |
| Tool Box | Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated |
| Tie Downs | Double Key Hole Chain Slot / Gotchas on 16″ Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Slope at Deck |
| Tail Lifting Capacity | 24,000 lbs. |
| Load Angle | 11° with 15′ Tail |
| Features | Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail, Center Deck Keyholes on Tail, Bolt-On Traction Plate Over Approach Plate |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Slope Ramp
| 6′ x 102″ Upper Deck Ramp (Air operated) (10,000 lbs. capacity) (11.5° load angle) |
|---|
Suspension & Undercarriage
| Suspension | Neway Air Ride RLU228, 22,500 lbs. Capacity with Manual Dump Valve |
|---|---|
| Undercarriage | Centralized Grease System |
| Axles | (2) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters |
| Axles Prepped for Air Inflation | |
| Brakes | 12.25 x 7.5 Full Air / Spring Brakes ABS, 4S2M |
| Tires | 235/75R 17.5 LRJ Continental |
| Rims | 17.5 x 6.75 Tubeless |
| Wheels | Steel Hub Pilot |
| Oil Seal Hubs | Internal Mated Assembly |
Hydraulics
| Hydraulic Hook Up | Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max |
|---|---|
| Hydraulic Winch | Upper Deck 12,000 lbs. Worm Gear with 85′ of 1/2″ Cable with Wear Plate |
| Hydraulic Valve Body | Rexroth |
Electrical
| Air / Electrical | 7 Way Receptacle |
|---|---|
| Lights | Industry Best Grote LED Lighting with Oven Annealed Markers (Up to a 10-year warranty) |
| Wiring Harness | Industry Best Grote Xtreme Harnessing (7-year warranty) |
Finish & Color
| Finish | Steel Grit Shot Blast to Bright Metal |
|---|---|
| Color | Zinc Rich Primer |
| Powder Coat Color | White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue |
| Decals | Hi-Visibility Reflective Package |
Options
Bulkhead
| Bulkhead | 16″/24″ 2 Position 48″ x 102″ Mesh |
|---|---|
| Note: All Bulkhead options require the 48″ X 102″ Bulkhead | |
| Bulkhead Wings | Steel Wings (Powder Coat Black) Aluminum Wings |
| Aluminum LED Light Bar (Stop, Turn, and Taillights) with Chain Binder Rack | |
| Dual LED Work Lights | |
| Dual Class II Strobe Beacons | |
| Bolt-On Chain-Binder Rack | |
| Spare Tire Carrier | |
Parking Stands
| Pin Drop |
|---|
Tie Downs
| D-Rings | Flush Mounted Bolt-On at Winch Recessed Mounted |
|---|
Winch & Accessories
| Winch | 20K Winch (Braden) 12K Delete Standard Winch 20k or 30K Winch (Warn) |
|---|---|
| Winch Guard | |
| Cable Roller Guide | 4-Way Rollers Pivoting |
| Wireless Remote Control | Six Function |
Deck & Accessories
| Toolboxes | Load Bearing, Self-Supporting, Top Opening Toolboxes Side Opening Toolboxes Lower Deck Bolt-On Lockable Toolbox |
|---|---|
| Traction Bars for Tail | Weld On 12′ Tail Weld On 15′ Tail |
| Bolt-On Landoll Traction Plate over Approach | |
| Keyhole Tie Downs for Center Main Deck | |
| Double Drop Deck | |
| Swing-Out Lights | Upper Deck Turn/Flashing Lights Lower Deck Turn/Flashing Lights |
Suspension & Undercarriage
| Digital Scale System | |
|---|---|
| Galvanized Bumper |
Hydraulic Power Source
| Wet Kit for Tractor (Includes 30 Gallon Steel Tank) | Shipped loose with trailer or factory installed |
|---|---|
| Hydraulic Quick Coupler Kit (1 male, 1 female) | |
| Polished Aluminum Hydraulic Tank, (19″W x 24D”) (Side mount) | |
| Kohler EFI, 25 HP, Gas Powered Hydraulic Engine Package with Cover | Upper Deck Mounted Under Deck Mounted |
Tires & Rims
| 17.5 Machined Aluminum Wheel (Priced per tire) | |
|---|---|
| 17.5 Polished Aluminum Wheel (Priced per tire) | |
| 22.5 Machined Aluminum Wheel (Priced per tire) | |
| 22.5 Polished Aluminum Wheel (Priced per tire) | |
| Tires | 235/75R 17.5 Double Coin 245/70R 17.5 Michelin X Multi T LRH 255/70R 22.5 Double Coin 255/70R 22.5 Michelin |
| Spare Tires Available with Rim of Choice | |
| PSI Tire Inflation System | |
| Hubometer | |
Paint & Special
| Hot Dip Galvanizing | |
|---|---|
| Paint Over Galvanizing | Sides Top Surface (Standard Colors Only) |
| Wet Paint Colors | Black (Standard), Metallic Gray, White, Red, Viper Red, Green, Balboa Blue, Sapphire Blue, Yellow |
| Powder Coat Paint only available with Non-Galvanized Trailers | |
| Powder Coat Paint Colors | Black (Standard), Metallic Gray, White, Red, Viper Red, Green, Balboa Blue, Sapphire Blue, Yellow |
| Special Paint: Contact Factory | |
Specifications
| Model | Capacity* | Base Weight | Length | Tail Length | Deck | Axles | Tires & Ply Ratings |
|---|---|---|---|---|---|---|---|
| 930E-45-12 | 35 Ton | 17,265 lbs. (+/- 3%) | 45′ | 12′ | 102″ x 35’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
| 930E-48-12 | 35 Ton | 17,660 lbs. (+/- 3%) | 48′ | 12′ | 102″ x 38’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
| 930E-48-15 | 35 Ton | 18,770 lbs. (+/- 3%) | 48′ | 15′ | 102″ x 38’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
| 930E-51-15 | 35 Ton | 19,250 lbs. (+/- 3%) | 51′ | 15′ | 102″ x 41’ 3″ | 2 | (8) 235/75R 17.5 LRJ Double Coin |
* Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
Specifications subject to change without notice.
Disclaimer: Landoll has a corporate policy of continuous product improvement and development, therefore, specifications are subject to change without any advance notice. Landoll is not responsible for differences between the specifications or illustrations contained on literature, data sheets, website and actual equipment.
The information on any form of this website is intended only for the sole use of Landoll. We do not share or sell any of this information to third parties. This drawing and all information therein is property of Landoll and is confidential. It must not be made public or copied. This drawing is loaned subject to return upon demand and shall not be used directly or indirectly in anyway detrimental to our interest. Drawing illustrates standard equipment; optional equipment may change standard measurements.
Gallery
