Detachable Trailers

Detachable Trailers

Detachable Trailers

Detachable Model 860

previous arrow
next arrow
previous arrownext arrow
Slider

The new innovative 4-beam frame features a flat deck with a loaded height of 19 1/2″. The 860 is a 3 base trailer frame with hinge brackets air/electrical for a 4th -axle flip or a Nitrogen Stinger / Spreader Bar, 120,000 lb. capacity with a 14’ concentrated deck rating.

VIEW LITERATURE
PRINT LITERATURE

Contact Trailer Sales

Heavy Duty Versatility Plus Many Standard Features

The Landoll 860’s versatility originates in its primary standard features. The innovative 4-beam frame features a flat deck with a loaded height of 19 1/2″. The 860 is a 3 axle trailer frame with hinge brackets air/electrical for a 4th -axle flip or a Nitrogen Stinger / Spreader Bar, 120,000 lb. capacity with a 14’ concentrated deck rating.

Patented Gooseneck Design – Flexibility

The gooseneck is a Landoll patent that gives the operator the control at his fingertips. Two kingpin settings, with swing clearance of 108″ and 90″, allow three or four axle tractors to maximize their weight distribution. The 7-position ride height gives needed ground clearance and lowers the deck height to carry extremely high loads. No other gooseneck offers such flexibility as the Landoll 800 Construction Series.

Complete Package

The 860 Series is the complete package. A maximum lower deck length allows you to position your loads and scale legally. For heavy loads, the base trailer comes standard with flip axle brackets and air/electrical couplers. To move a permit load with ease, an optional flip axle for four in a row or the Nitrogen Stinger / Spread bar to establish a 14-foot spread between the rear trailer axle and the stinger axle can be added. The 860 gooseneck is standard with the flip extension brackets. The optional 36” flip extension allows for swing clearance of a two-axle jeep dolly. The Landoll detachable series is work ready with a flattened front approach, apitong wood in the track area, a recessed storage compartment, and swing-out overwidth extensions. The front, the double outrigger is for added strength at the break over. There are traction bars on the approach and on the front half bolster for added traction.

Frame and Features

  • *Capacity: 60 Ton (120,000 lbs.)
  • Deck Rating: 120,000 lbs. in 14′
  • Estimated Base Weight: 25,400 lbs.
  • Main Frame: Fabricated 13″ Beam, 100,000 PSI Flange; 4th Axle or 14’1″ Stinger Ready (3+1 Configuration)
  • Deck Width: 102″
  • Loaded Deck Height: 19.5″
  • Loaded Ground Clearance: 6.5″
  • Decking: Full 2″ Apitong Track Area
  • Crossmembers: 8″ High Tensile I-Beams on 24″ Centers
  • Gooseneck: 12’5″ Dual Drop-In Kingpin Settings, with 7-Position Fifth-Wheel Ride Height; Front Brackets for Flip Extension
  • Pin Setting: Dual Pins 15″ and 33″
  • Swing Clearance: 108″
  • Accessories: Gooseneck Front Flip Extension Ready, 12″ Swing-Out Outriggers; HD Sloped Front Approach with Traction Bars, 6′ Recessed Bucket Trough at Rear of Lower Deck, Open Boom Trough with “V” Type Bumper, One Pair Flag Holders
  • Storage Area: (1) Between Main Frame at Front of Lower Deck (41″W x 24″L x 10″ D)
  • Tie Downs: (24 Total) All Angled D-Rings, (7) Each Side Lower Deck, (1) on End of Each Bolster, (2) at Rear of Lower Deck, (2) at the Top of Rear Slope, (2) at Rear of Trunnion
  • Bolsters: Half Front Bolster with Traction Bars, Lowered Bolster Between Tires (20,000 lb. Capacity); Rear Bolster (17,500 lb. Capacity)

Suspension and Undercarriage

  • Suspension: Neway Air Ride, 25,000 lb. Capacity with Mechanical Ride Height Control Valve
  • Grease: Centralized Grease System
  • Axles: (3) 25,000 lb. Axles, Dual Tire, Oil Bath Bearings, 54″ Spacing on 53′; Auto Slack Adjusters – All Axles
  • Axles Prepped for Air Inflation
  • Brakes: 16.5×7 Full Air / Spring Brakes on 3 Axles ABS, 4S2M
  • Tires: 275/70R 22.5 LRH Double Coin
  • Rims: 22.5×8.25
  • Wheels: Hub Pilot / Steel Outboard Brake Drums
  • Oil Seal Hubs: Internal Mated Assembly
  • Air Raise and Lowering Valve

Hydraulics

  • Hydraulic Hook-Up: Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max
  • Cylinders: Gooseneck Cylinders Horizontally Mounted

Electrical

  • Air / Electrical:  Glad Hand / 7-Way Receptacle
  • Lights: Grote Clear Lens LED with Chrome Bezel (10-Year Warranty)
  • Wiring Harness: Grote “Xtreme” Wiring Harness (7-Year Warranty)
  • Strobe Light

Finish and Color

  • Finish: 400° Bake / Steel Grit Shot Blast to Bright Metal
  • Color: Zinc Rich Powder Primer
  • Powder Coat: TGIC Polyester Powder Coat, White / Black / Yellow / Blue / Red / Green / Sapphire Blue / Dark Gray

Gooseneck:

  • Fenders for Standard 12′ 5″Gooseneck
  • Aluminum Cover Plate (HD 3/16″ x 72″ Long)
  • Gooseneck LED Lights (2 Stop / Turn / Tail and 1 White Work Light per Side)
  • Gooseneck Mud Flaps
  • Bolt-On Chain and Binder Rack Between Lock Arms
  • 36″ Front Flip Extension for Heavy-Duty Gooseneck (144″ Swing Clearance)
  • Hydraulic Flip for Gooseneck Extension
  • Lockable Curbside G/N Mounted Toolbox-Black or Galvanized

Outriggers:

  • Swing-Out Outrigger Plank, 1 Set of 4 Boards 2-3/4″T x 5″W x 84″L (P/N 163580)
  • Outrigger Plank Storage Lock Downs

Trunnion:

  • 60″ Axle Spacing (Changes Deck / Trailer Length)
  • Boom Trough Cover
  • Flip 4th Axle Assembly (Matches Trailer Axle Spacing) (with 255/70R 22.5 Tires)
  • Hydraulic Flip for 4th Axle (Effects Boom Trough)(3rd Axle Air Lift / Retract Not Available)
  • Full Covered Wheel Area 1/4″ Plate (Weight Bearing) Boom Trough Remains Open 275 (Hi-Pro) or 255 (Lo-Pro) Tires
  • Bolt-On Poly Fenders (3 Axle) (Non-Weight Bearing)
  • Bolt-On Poly Fenders for Flip
  • Center Filler Deck for Trunnion
  • Bucket Trough Filler
  • Paver Trunnion Slope Filler (Wood Covered)
  • Pin-On Beaver Tail Weldment (rear flip anchors to ramps)
  • Mack Ramps for Pin-On Beaver Tail Weldment

Accessories:

  • Magnetic LED Amber Warning Lights (360° Flashing, Battery Powered)
  • Battery Back-Up for Strobe Lights
  • Pull-Out Marker Lights for G/N & Trunnion (Amber Front/Red Rear)

Tie Down Rings:

  • Extra Flush Mounted D-Rings
  • Extra Flush Mounted Angled D-Rings
  • 3/8″ x 3-1/2″ Double Keyhole Strap Full-Length Lower Deck (Each)

Deck and Accessories:

  • Center Filled Wood Deck – Apitong
  • Additional Center Storage Area Center Lower Deck
  • Lockable Hinged Cover for Storage Area
  • Additional Crossmembers in Track Area or Full Width
  • Smooth Side Frame Option

Suspension and Undercarriage:

  • Air-Weigh Digital Scale System Quickload Plus or Loadmax Plus
  • Liquid Filled Air Pressure Gauge(ARCTIC Available)
  • Hubometer
  • Crossfire Air Equalizers
  • Meritor Tire Inflation System
  • Shock Straps
  • Dust Shields
  • Air Lift/Retract-Per Axle
  • Dexter Air Disc Brake Axles in lieu of drum

Hydraulic Power Source:

  • Wet Kit for Tractor (Includes 30 Gallon Steel Tank)
    • Shipped Loose with Trailer or Factory Installed
  • Polished Aluminum Hydraulic Tank, (19″W x 24D”) (Side Mount) in Lieu of Standard
  • Hydraulic Quick Couplers 1 Male / 1 Female (Matches Trailer) (P/N 105902)
  • Hydraulic Engine Package – Gooseneck Mounted with Cover 25 HP Kohler EFI Gas (P/N 124981) Includes Mounting Kit (P/N 178434)
  • Filter Lubricator Regulator Assembly (Ref 226980)

Tire and Rims:

  • 275/70R 22.5 Continental Tires LRJ in Lieu of Standard
  • 275/70R 22.5 Michelin Tires in Lieu of Standard
  • Spare 275/70R 22.5 Double Coin Tire and Hub Pilot Type Rim
  • Spare 275/70R 22.5 Continental Tire LRJ and Hub Pilot Type Rim
  • Spare 275/70R 22.5 Michelin Tire and Hub Pilot Type Rim
  • 22.5 Aluminum Wheel (10-Bolt Polished) in Lieu of Standard (Each)
  • 22.5 Aluminum Wheel (10-Bolt Machined) in Lieu of Standard (Each)
  • 22.5 Aluminum Wheel (10-Bolt Dura-Brite) in Lieu of Standard (Each)

Front Approach Options:

  • Traction Bars for Front Approach
  • Pin on Front Assist Ramps
  • 24” Flip Over Ramp
  • Bi-Fold Paver Ramp (Paver Style Track Area)
  • Center Aluminum Wood Filled Ramps (With Gooseneck Storage Rack)
  • Electric/Hydraulic Full-Width Power Ramp 8.5 degree Load Angle
  • Electric/Hydraulic Full-Width Power Ramp 15 degree Load Angle

Special Prices:

  • Hot Dip Galvanizing (Lower Deck and Trunnion) G/N Powder Coated Only
  • Hot Dip Galvanizing of Flip Axle Assembly
  • Paint Over Galvanizing – Sides Only of Lower Deck and Trunnion Slope with Standard Colors Only

Specifications Table

Model Capacity Base Weight Deck Axles Tires and Ply Rating
Model Capacity Base Weight Deck Axles Tires and Ply Rating
860 60 Ton 25,400 lbs. (+/- 3%) 102″x26′ 3 (12) 275/70R 22.5 LRH Double Coin

Line Drawing

Printable Line Drawing

860TrailerLineDrawings-LD860F_227058_Rear_Flip-0820

860TrailerLineDrawings-LD860F_227058_Spreader_Flip-0820

*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice.

Related Equipment

Model 440B

Model 455B

Model 317E

Model 318E

Model 330D-1

Model 330D-2

Model 343A

Model 345F

Model 325C

Model 326C

Model 327C

Model 329C

Model 825-AG

Model 835-AG

Model 845-AG

Model 835

Model 855

Model 930E

Model 950E

Model 302C-B

Model 302D-B

Model 305D-B

Model 312D-B

Model 313D-B

Model 314D-B

Model 135C

Model 150C

135 CSY GSA

Loadoll II

Model LT1016A

Model LT1016A+4

Model LT1020A

Model LT1216+4

Model LT1220

Model LT1420A / LT1422A

Model L2024A

Model L2424A

Model L4024A

Model L5029A