Landoll Corporation

Search the Site  

Home > Products > Farm Equipment > Brillion Farm Equipment > Pulverizer

Brillion Pulverizer

Description

The Brillion Pulverizer has been synonymous with quality seedbed preparation for well over 100 years.

It’s About Higher Yield

All models in the Brillion Pulverizer line have a common denominator…HIGHER YIELD. Producers know that higher yields start with a properly prepared seedbed and a firm seedbed is critical to maintain a uniform planting depth. The ideal seedbed should be firm with fine particles at the seed depth and should have a layer of loose mulch on the surface to slow evaporation and conserve moisture. 

The_Pulverizer_Principle_600x460px.jpg

Many of the most valuable nutrients are locked in the clods and root crowns left in the field. The Pulverizer crushes those clods and breaks down the root crowns to release those nutrients for use by the crop. At the same time, air pockets are eliminated and moisture is drawn into the root zone through capillary action. Good seed to soil contact creates more uniform germination, pollination and maturity…and that means increased yields and greater profits.

It’s About the Soil

The Brillion Pulverizer line is a genuine asset to the value of the soil and can be the missing link in improving the soil from mediocre to a good growth environment with just a single pass. The ribs or ridges on the Pulverizer wheels/rolls are the real workhorses; residue is anchored into the surface of the seedbed so it can’t be blown or washed into road ditches, water ways, culverts, etc. The ribs form a distinct texture on the surface that allows the soil surface to breathe in the event of a crusting rain. The soil will normally split and crack along the rib cuts to allow oxygen and water to enter the soil and to give small seeds a place to grow through. Some producers also utilize the Pulverizer (equipped with notched wheels) in a post-plant mode, further firming the seedbed for optimum germination.

It’s About Smooth

The Brillion Pulverizer will put a smooth, textured finish on the seedbed. The smooth seedbed allows for closer to the surface harvest in a soybean field and the ultimate opportunity for high-speed cutting and harvesting of alfalfa. The smooth seedbed also has any small to medium sized stones pushed into the soil to lessen the occurrence of ingestion by a combine or forage harvester.

Endless Models and Wheel Options

Brillion offers Pulverizer models in sizes from 5’ up to 52’. There are three-point hitch models, rigid transport pull-type models, and folding pull-type units available.  Each series has its own unique features and choice of Pulverizer wheel options.

Pulverizer-Wheel-Usage-Guide_600x552px.jpg

New Upgrades for 2015/2016

The X, XL, and XXL Series Folding Pulverizers have been updated to include 1 ¾” trunnion mounted bearings and 8” roller axles (similar to what is offered on the Wing Float Series). The new 22” V-Style Wheel has been added to fit the needs of the dry land producer who wants to anchor residue and reduce wind erosion. Visit our Features and Specs pages for more details!

Features

Endless Options and Sizes to Accommodate Any Operation

  • Gray Iron Wheels Covered by Standard 1-Year Warranty
  • Ductile Iron Wheels Covered by 5-Year Limited Warranty
  • 1 ¾” Trunnion Bearings on X, XL, XXL and Wing Float Pulverizers Covered by 3-Year Limited Warranty
  • Scraper Kits Available for Notched Wheel Types and V-Style Wheels
  • Powder Coat Paint

WFP Series, Wing Float Pulverizer - 22' to 36' Models

  • Patented Wing Float Design
  • Working Widths From 23’4” to 37’4”
  • Transport Heights Under 11'
  • Transport Width 14'
  • Telescoping Drawbar on 28' to 36' Models
  • 8" Pulverizer Axle Size
  • 1 ¾” Trunnion Bearings
  • Maintenance Free Rockshaft Bearings
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer® Ductile Iron
    • 20” Crowfoot Ductile Iron

WFP Series, Wing Float Pulverizer - 38' to 52' Models

  • Patented Wing Float Design
  • Working Widths From 38’ to 52’
  • Transport Heights Under 10'
  • Transport Width 17'5" on 38' to 46' Models
  • Transport Width 19’8” on 50’ Model
  • Transport Width 21’8” on 52’ Model
  • Telescoping Drawbar
  • 8" Pulverizer Axle Size
  • 1 ¾” Trunnion Bearings
  • Maintenance Free Rockshaft Bearings
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron
    • 20” Crowfoot Ductile Iron

X Series, Folding Pulverizer - 20' to 26' Models

  • Working Widths From 20’1" to 26’1"
  • Transport Heights Under 8'2"
  • Transport Width 11'
  • 8” Pulverizer Axle
  • 1 ¾” Trunnion Bearings
  • Maintenance Free Rockshaft Bearings
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron
    • 20" Crowfoot Ductile Iron
    • 20” Notched Ductile Iron H (Heavy)
    • 22” V-Style Ductile Iron

XL Series, Folding Pulverizer - 28' to 36' Models

  • Working Widths From 28’9" to 36’9"
  • Transport Heights Under 8'1"
  • Transport Width 15'1"
  • Telescoping Drawbar
  • 8” Pulverizer Axle
  • 1 ¾” Trunnion Bearings
  • Maintenance Free Rockshaft Bearings
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron
    • 20" Crowfoot Ductile Iron
    • 20” Notched Ductile Iron H (Heavy) - 28' to 32' Models
    • 22” V-Style Ductile Iron

XXL Series, Folding Pulverizer - 38' to 46' Models

  • Working Widths From 38’4" to 46’4"
  • Transport Heights Under 8'9"
  • Transport Width 18'1"
  • Telescoping Drawbar
  • 8” Pulverizer Axle
  • 1 ¾” Trunnion Bearings
  • Maintenance Free Rockshaft Bearings
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron
    • 20" Crowfoot Ductile Iron
    • 22” V-Style Ductile Iron

PT Series, Rotating Frame Transport Models

  • Working Widths From 10’ to 20’
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20” Optimizer Ductile Iron
    • 20” Crowfoot Ductile Iron
    • 22” V-Style Ductile Iron

P Series, Pull-Type/No Transport Models

  • Working Widths From 5’ to 16’
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron - 5' to 16' Models
    • 16” Notched Gray Iron - 5’ to 8’ Models
    • 16” Crowfoot Gray Iron - 5’ to 8’ Models
    • 20” Crowfoot Ductile Iron - 10’ to 16’ Models

PP Series, Three-Point Hitch Models

  • Working Widths From 5’ to 20’
  • Cat. I Three-Point Hitch on 5' to 7' Models
  • Cat. I, II Three-Point Hitch on 8' to 20' Models
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron - 5' to 20' Models
    • 16" Notched Gray Iron - 5' to 8' Models
    • 16" Crowfoot Gray Iron - 5' to 8' Models
    • 20" Optimizer Ductile Iron - 10' to 20' Models

PFT Series, Floating Ring Models

  • Floating Ring Design Best Suited for Use with Companion Primary Tillage Tool
  • Cat. II, III Three-Point Hitch Models Available in Sizes from 6' to 18'
  • Pull-Type Models Available in Sizes from 10' to 22'
  • 20" Ductile Iron Rings with 14" Inside Diameter

SD Series, Double Gang Models

  • Double Roller Configuration - Same Foundation as on Brillion Sure Stand Seeders
  • 6', 8', 10' or 12' Three-Point Hitch Models Available
  • Pull-Type Models Available in 8', 10' or 12' Sizes
  • Gray Iron Pulverizer Wheels with Larger Diameter Wheels on the Front Roller

Compare Models

How does Brillion stack up against the competition? 

Read more

Specs

WFP Series, Wing Float Pulverizer -  22' to 36' Models

WFP22 WFP24 WFP26 WFP28 WFP30 WFP32 WFP34 WFP36
Approximate Weight
(WFPDS) 20" Notched Ductile Iron Wheels with Scrapers 7,205 lbs. (3,268 kg) 7,494 lbs. (3,399 kg) 7,779 lbs. (3,528 kg) 8,359 lbs. (3,792 kg) 8,677 lbs. (3,936 kg) 9,085 lbs. (4,121 kg) 9,331 lbs. (4,232 kg) 9,719 lbs. (4,408 kg)
(WFPD) 20" Notched Ductile Iron Wheels Excluding Scrapers 6,985 lbs. (3,168 kg) 7,259 lbs. (3,293 kg) 7,521 lbs. (3,411 kg) 8,085 lbs. (3,667 kg) 8,387 lbs. (3,804 kg) 8,780 lbs. (3,983 kg) 9,003 lbs. (4,084 kg) 9,375 lbs. (4,252 kg)
(WFPO) 20" Optimizer Ductile Iron Wheels 7,270 lbs. (3,298 kg) 7,575 lbs. (3,436 kg) 7,866 lbs. (3,568 kg) 8,462 lbs. (3,838 kg) 8,795 lbs. (3,989 kg) 9,217 lbs. (4,181 kg) 9,470 lbs. (4,296 kg) 9,873 lbs. (4,478 kg)
(WFPC) 20" Crowfoot Ductile Iron Wheels 6,440 lbs. (2,921 kg) 6,670 lbs. (3025 kg) 6,895 lbs. (3,128 kg) 7,435 lbs. (3,372 kg) 7,733 lbs. (3,508 kg) 8,045 lbs. (3,649 kg) 8,325 lbs. (3,776 kg) 8,550 lbs. (3,878 kg)
Approximate Tongue Weight
Drawbar Retracted, Transport N/A N/A N/A 1,800 lbs. (816 kg) 1,800 lbs. (816 kg) 1,850 lbs. (839 kg) 1,850 lbs. (839 kg) 1,850 lbs. (839 kg)
Drawbar Extended, Transport 1,300 lbs. (590 kg) 1,300 lbs. (590 kg) 1,300 lbs. (590 kg) 1,400 lbs. (635 kg) 1,400 lbs. (635 kg) 1,500 lbs. (680 kg) 1,500 lbs. (680 kg) 1,500 lbs. (680 kg)
Operation Under 100 lbs. (45 kg) Under 100 lbs. (45 kg) Under 100 lbs. (45 kg) Under 100 lbs. (45 kg) Under 100 lbs. (45 kg) Under 100 lbs. (45 kg) Under 100 lbs. (45 kg) Under 100 lbs. (45 kg)
Working Width 23 ft. 4 in. (7.1 m) 25 ft. 4 in. (7.7 m) 27 ft. 4 in. (8.3 m) 29 ft. 4 in. (8.9 m) 31 ft. 4 in. (9.6 m) 33 ft. 4 in. (10.2 m) 35 ft. 4 in. (10.8 m) 37 ft. 4 in. (11.4 m)
Transport Width 14 ft. 0 in. (4.3 m) 14 ft. 0 in. (4.3 m) 14 ft. 0 in. (4.3 m) 14 ft. 0 in. (4.3 m) 14 ft. 0 in. (4.3 m) 14 ft. 0 in. (4.3 m) 14 ft. 0 in. (4.3 m) 14 ft. 0 in. (4.3 m)
Transport Height 8 ft. 4 in. (2.5 m) 8 ft. 8 in. (2.6 m) 9 ft. (2.7 m) 9 ft. 4 in. (2.8 m) 9 ft. 8 in. (2.9 m) 10 ft. 2 in. (3.1 m) 10 ft. 6 in. (3.2 m) 10 ft. 10 in. (3.3 m)
Overall Length, Drawbar Retracted N/A N/A N/A 17 ft. (5.2 m) 17 ft. (5.2 m) 17 ft. (5.2 m) 18 ft. (5.5 m) 18 ft. (5.5 m)
Overall Length, Drawbar Extended N/A N/A N/A 22 ft. (6.7 m) 22 ft. (6.7 m) 22 ft. (6.7 m) 23 ft. (7.0 m) 23 ft. (7.0 m)
Overall Length, Rigid Drawbar 21 ft. (6.4 m) 21 ft. (6.4 m) 21 ft. (6.4 m) N/A N/A N/A N/A N/A
Road Clearance 11.5 in. (292 mm) 11.5 in. (292 mm) 11.5 in. (292 mm) 11.5 in. (292 mm) 11.5 in. (292 mm) 11.5 in. (292 mm) 11.5 in. (292 mm) 11.5 in. (292 mm)
Automatic Transport Lock Standard Standard Standard Standard Standard Standard Standard Standard
Hydraulic Circuits Required 1 1 1 1 1 1 1 1
Number of Pulverizer Wheels
(WFPDS) 20" Notched Ductile Iron Wheels with Scrapers 72 78 84 90 96 102 108 114
(WFPD) 20" Notched Ductile Iron Wheels Excluding Scrapers 72 78 84 90 96 102 108 114
(WFPO) 20" Optimizer Ductile Iron Wheels 47 51 55 59 63 67 71 75
(WFPC) 20" Crowfoot Ductile Iron Wheels 47 51 55 59 63 67 71 75
Axle Size 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm)
Hitch Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport
Tire Size 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims
Scraper Kits Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S"
WFP Float Lock Kit Optional Optional Optional Optional Optional Optional Optional Optional
WFP Hydraulic Top Link Kit Optional Optional Optional Optional Optional Optional Optional Optional
Telescoping Drawbar Optional Optional Optional Standard Standard Standard Standard Standard
Electronic Acre Meter Kit Optional Optional Optional Optional Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem Standard Standard Standard Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard Standard Standard Standard
Horsepower Requirements 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m)
Horsepower Requirements As Companion Tool 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m)
Recommended Operating Speed 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h)

WFP Series, Wing Float Pulverizer -  38' to 46', 50' & 52' Models

WFP38 WFP40 WFP42 WFP44 WFP46 WFP50 WFP52
Approximate Weight
(WFPDS) 20" Notched Ductile Iron Wheels with Scrapers 11,000 lbs. (4,990 kg) 11,300 lbs. (5,126 kg) 11,900 lbs. (5,398 kg) 12,200 lbs. (5,534 kg) 12,500 lbs. (5,670 kg) 12,857 lbs. (5,832 kg) 13,172 lbs. (5,975 kg)
(WFPD) 20" Notched Ductile Iron Wheels Excluding Scrapers 10,610 lbs. (4,813 kg) 10,896 lbs. (4,942 kg) 11,465 lbs. (5,200 kg) 11,750 lbs. (5,330 kg) 12,036 lbs. (5,459 kg) 12,380 lbs. (5,615 kg) 12,680 lbs. (5,752 kg)
(WFPO) 20" Optimizer Ductile Iron Wheels 11,190 lbs. (5,076 kg) 11,490 lbs. (5,212 kg) 12,075 lbs. (5,477 kg) 12,400 lbs. (5,624 kg) 12,720 lbs. (3,989 kg) 13,500 lbs. (6,123 kg) 13,860 lbs. (6,287 kg)
(WFPC) 20" Crowfoot Ductile Iron Wheels 9,620 lbs. (4,364 kg) 9,885 lbs. (4,484 kg) 10,350 lbs. (4,695 kg) 10,575 lbs. (4,797 kg) 10,795 lbs. (4,897 kg) 11,410 lbs. (5,175 kg) 11,635 lbs. (5,278 kg)
Approximate Tongue Weight
Drawbar Retracted, Transport 1,075 lbs. (488 kg) 1,125 lbs. (510 kg) 1,175 lbs. (533 kg) 1,200 lbs. (544 kg) 1,225 lbs. (556 kg) 1,000 lbs. (454 kg) 1,000 lbs. (454 kg)
Drawbar Extended, Transport 780 lbs. (354 kg) 800 lbs. (363 kg) 820 lbs. (372 kg) 840 lbs. (381 kg) 860 lbs. (390 kg) 750 lbs. (340 kg) 750 lbs. (340 kg)
Operation Under 200 lbs. (91 kg) Under 200 lbs. (91 kg) Under 200 lbs. (91 kg) Under 200 lbs. (91 kg) Under 200 lbs. (91 kg) Under 200 lbs. (91 kg) Under 200 lbs. (91 kg)
Working Width 38 ft. 4 in. (11.7 m) 40 ft. 4 in. (12.3 m) 42 ft. 4 in. (12.9 m) 44 ft. 4 in. (13.5 m) 46 ft. 4 in. (14.1 m) 49 ft. 10 in. (15.2 m) 51 ft. 10 in. (15.8 m)
Transport Width 17 ft. 5 in. (5.3 m) 17 ft. 5 in. (5.3 m) 17 ft. 5 in. (5.3 m) 17 ft. 5 in. (5.3 m) 17 ft. 5 in. (5.3 m) 19 ft. 8 in. (6.0 m) 21 ft. 8 in. (6.6 m)
Transport Height 9 ft. 0 in. (2.7 m) 9 ft. 0 in. (2.7 m) 9 ft. 0 in. (2.7 m) 9 ft. 0 in. (2.7 m) 9 ft. 0 in. (2.7 m) 10 ft. 0 in. (3.0 m) 10 ft. 0 in. (3.0 m)
Overall Length, Drawbar Retracted 20 ft. 0 in. (6.1 m) 20 ft. 0 in. (6.1 m) 20 ft. 0 in. (6.1 m) 20 ft. 0 in. (6.1 m) 20 ft. 0 in. (6.1 m) 24 ft. 7 in. (7.5 m) 24 ft. 7 in. (7.5 m)
Overall Length, Drawbar Extended 26 ft. 8 in. (8.1 m) 26 ft. 8 in. (8.1 m) 26 ft. 8 in. (8.1 m) 26 ft. 8 in. (8.1 m) 26 ft. 8 in. (8.1 m) 31 ft. 3 in. (9.5 m) 31 ft. 3 in. (9.5 m)
Road Clearance 15 in. (381 mm) 15 in. (381 mm) 15 in. (381 mm) 15 in. (381 mm) 15 in. (381 mm) 15 in. (381 mm) 15 in. (381 mm)
Mechanical Transport Lock Standard Standard Standard Standard Standard Standard Standard
Hydraulic Circuits Required 1 1 1 1 1 1 1
Number of Pulverizer Wheels
(WFPDS) 20" Notched Ductile Iron Wheels with Scrapers 117 123 129 135 141 151 157
(WFPD) 20" Notched Ductile Iron Wheels Excluding Scrapers 117 123 129 135 141 151 157
(WFPO) 20" Optimizer Ductile Iron Wheels 77 81 85 89 93 99 103
(WFPC) 20" Crowfoot Ductile Iron Wheels 77 81 85 89 93 99 103
Axle Size 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm)
Hitch Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport
Tire Size 12.5 x 15 FI Tires on 8 Bolt Rims 12.5 x 15 FI Tires on 8 Bolt Rims 12.5 x 15 FI Tires on 8 Bolt Rims 12.5 x 15 FI Tires on 8 Bolt Rims 12.5 x 15 FI Tires on 8 Bolt Rims 12.5 x 15 FI Tires on 8 Bolt Rims 12.5 x 15 FI Tires on 8 Bolt Rims
Scraper Kits Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S" Standard on Models with "S"
WFP Float Lock Kit Optional Optional Optional Optional Optional Optional Optional
Telescoping Drawbar Standard Standard Standard Standard Standard Standard Standard
Electronic Acre Meter Kit Optional Optional Optional Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem Standard Standard Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard Standard Standard
Horsepower Requirements 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m)
Horsepower Requirements As Companion Tool 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m)
Recommended Operating Speed 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h)

X Series, Folding Pulverizer - 19' to 27' Models

X19 X21 X23 X25 X27
Approximate Weight
(XDS) 20" Notched Ductile Iron Wheels with Scrapers 5,246 lbs. (2,380 kg) 5,509 lbs. (2,499 kg) 5,792 lbs. (2,627 kg) 6,053 lbs. (2,746 kg) 6,315 lbs. (2,864 kg)
(XD) 20" Notched Ductile Iron Wheels Excluding Scrapers 5,023 lbs. (2,278 kg) 5,271 lbs. (2,391 kg) 5,519 lbs. (2,503 kg) 5,766 lbs. (2,615 kg) 6,014 lbs. (2,728 kg)
(XO) 20" Optimizer Ductile Iron Wheels 5,445 lbs. (2,470 kg) 5,744 lbs. (2,605 kg) 6,043 lbs. (2,741 kg) 6,334 lbs. (2,873 kg) 6,633 lbs. (3,009 kg)
(XC) 20" Crowfoot Ductile Iron Wheels 4,470 lbs. (2,028 kg) 4,966 lbs. (2,253 kg) 5,192 lbs. (2,355 kg) 5,418 lbs. (2,458 kg) 5,644 lbs. (2,560 kg)
(XHS) 20" Notched Ductile Iron H (Heavy) Wheels with Scrapers 5,937 lbs. (2,693 kg) 6,267 lbs. (2,843 kg) 6,617 lbs. (3,001 kg) 6,947 lbs. (3,151 kg) 7,277 lbs. (3,301 kg)
(XH) 20" Notched Ductile Iron H (Heavy) Wheels Excluding Scrapers 5,718 lbs. (2,594 kg) 6,034 lbs. (2,737 kg) 6,349 lbs. (2,880 kg) 6,664 lbs. (3,023 kg) 6,980 lbs. (3,166 kg)
(XHR) 20" Notched Ductile Iron H (Heavy) Wheels with Sprockets 6,627 lbs. (3,006 kg) 7,035 lbs. (3,191 kg) 7,443 lbs. (3,376 kg) 7,851 lbs. (3,561 kg) 8,258 lbs. (3,746 kg)
(XVS) 22" V-Style Ductile Iron Wheels with Scrapers 5,682 lbs. (2,577 kg) 6,020 lbs. (2,731 kg) 6,336 lbs. (2,874 kg) 6,651 lbs. (3,017 kg) 6,965 lbs. (3,159 kg)
(XV) 22" V-Style Ductile Iron Wheels Excluding Scrapers 5,248 lbs. (2,380 kg) 5,528 lbs. (2,507 kg) 5,807 lbs. (2,634 kg) 6,086 lbs. (2,761 kg) 6,365 lbs. (2,887 kg)
Approximate Tongue Weight
Drawbar, Transport 598 lbs. (271 kg) 603 lbs. (274 kg) 609 lbs. (276 kg) 615 lbs. (279 kg) 622 lbs. (282 kg)
Operation Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg)
Working Width 20 ft. 1 in. (6.1 m) 22 ft. 1 in. (6.7 m) 24 ft. 1 in. (7.3 m) 26 ft. 1 in. (7.9 m) 28 ft. 1 in. (8.6 m)
Transport Width 11 ft. (3.4 m) 11 ft. (3.4 m) 11 ft. (3.4 m) 11 ft. (3.4 m) 11 ft. (3.4 m)
Transport Height 7 ft. 3 in. (2.2 m) 7 ft. 6 in. (2.3 m) 7 ft. 9 in. (2.4 m) 7 ft. 11 in. (2.4 m) 8 ft. 2 in. (2.5 m)
Overall Length 22 ft. 2 in. (6.8 m) 22 ft. 6 in. (6.9 m) 22 ft. 10 in. (7.0 m) 23 ft. 1 in. (7.0 m) 23 ft. 5 in. (7.1 m)
Road Clearance
XDS, XD, XO, XC, XHS, XH, XHR Models 11.625 in. (295 mm) 11.625 in. (295 mm) 11.625 in. (295 mm) 11.625 in. (295 mm) 11.625 in. (295 mm)
XVS, XV Models 10.625 in. (270 mm) 10.625 in. (270 mm) 10.625 in. (270 mm) 10.625 in. (270 mm) 10.625 in. (270 mm)
Mechanical Transport Lock Standard Standard Standard Standard Standard
Hydraulic Circuits Required 1 1 1 1 1
Number of Pulverizer Wheels
(XDS) 20" Notched Ductile Iron Wheels with Scrapers 62 68 74 80 86
(XD) 20" Notched Ductile Iron Wheels Excluding Scrapers 62 68 74 80 86
(XO) 20" Optimizer Ductile Iron Wheels 40 44 48 52 56
(XC) 20" Crowfoot Ductile Iron Wheels 40 44 48 52 56
(XHS) 20" Notched Ductile Iron H (Heavy) Wheels with Scrapers 62 68 74 80 86
(XH) 20" Notched Ductile Iron H (Heavy) Wheels Excluding Scrapers 62 68 74 80 86
(XHR) 20" Notched Ductile Iron H (Heavy) Wheels with Sprockets 62 68 74 80 86
(XVS) 22" V-Style Ductile Iron Wheels with Scrapers (6 in. Spacing) 40 44 48 52 56
(XV) 22" V-Style Ductile Iron Wheels Excluding Scrapers (6 in. Spacing) 40 44 48 52 56
Axle Size
XDS, XD, XO, XC, XHS, XH, XHR Models 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm)
XVS, XV Models 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
Hitch Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport
Tire Size 9.5L x 15 Tires on 6 Bolt Rims 9.5L x 15 Tires on 6 Bolt Rims 9.5L x 15 Tires on 6 Bolt Rims 9.5L x 15 Tires on 6 Bolt Rims 9.5L x 15 Tires on 6 Bolt Rims
Scraper Kits Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S'
Weight Kit Optional Optional Optional Optional Optional
Electronic Acre Meter Optional Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard
Horsepower Requirements 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m)
Horsepower Requirements As Companion Tool 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m)
Recommended Operating Speed 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h)

XL Series, Folding Pulverizer - 28' to 36' Models

XL28 XL30 XL32 XL34 XL36
Approximate Weight
(XLDS) 20" Notched Ductile Iron Wheels with Scrapers 7,536 lbs. (3,418 kg) 7,805 lbs. (3,540 kg) 8,122 lbs. (3,684 kg) 8,390 lbs. (3,806 kg) 8,519 lbs. (3,864 kg)
(XLD) 20" Notched Ductile Iron Wheels Excluding Scrapers 7,218 lbs. (3,274 kg) 7,472 lbs. (3,389 kg) 7,773 lbs. (3,526 kg) 8,027 lbs. (3,641 kg) 8,141 lbs. (3,693 kg)
(XLO) 20" Optimizer Ductile Iron Wheels 7,884 lbs. (3,576 kg) 8,190 lbs. (3,715 kg) 8,541 lbs. (3,874 kg) 8,847 lbs. (4,013 kg) 9,013 lbs. (4,088 kg)
(XLC) 20" Crowfoot Ductile Iron Wheels 6,843 lbs. (3,104 kg) 7,076 lbs. (3,210 kg) 7,355 lbs. (3,336 kg) 7,587 lbs. (3,441 kg) 7,679 lbs. (3,483 kg)
(XLHS) 20" Notched Ductile Iron H (Heavy) Wheels with Scrapers 8,540 lbs. (3,874 kg) 8,877 lbs. (4,027 kg) 9,258 lbs. (4,199 kg) 9,594 lbs. (4,352 kg) 9,790 lbs. (4,441 kg)
(XLH) 20" Notched Ductile Iron H (Heavy) Wheels Excluding Scrapers 8,228 lbs. (3,732 kg) 8,550 lbs. (3,878 kg) 8,917 lbs. (4,045 kg) 9,239 lbs. (4,191 kg) 9,421 lbs. (4,273 kg)
(XLHR) 20" Notched Ductile Iron H (Heavy) Wheels with Sprockets 9,568 lbs. (4,340 kg) 9,982 lbs. (4,528 kg) 10,443 lbs. (4,737 kg) N/A N/A
(XLVS) 22" V-Style Ductile Iron Wheels with Scrapers 8,380 lbs. (3,801 kg) 8,702 lbs. (3,947 kg) 9,076 lbs. (4,117 kg) 9,397 lbs. (4,262 kg) 9,833 lbs. (4,460 kg)
(XLV) 22" V-Style Ductile Iron Wheels Excluding Scrapers 7,734 lbs. (3,508 kg) 8,020 lbs. (3,638 kg) 8,352 lbs. (3,788 kg) 8,637 lbs. (3,918 kg) 9,037 lbs. (4,099 kg)
Approximate Tongue Weight
Drawbar Retracted, Transport 922 lbs. (418 kg) 928 lbs. (421 kg) 940 lbs. (426 kg) 946 lbs. (429 kg) 937 lbs. (425 kg)
Drawbar Extended, Transport 776 lbs. (352 kg) 780 lbs. (354 kg) 789 lbs. (358 kg) 793 lbs. (360 kg) 784 lbs. (356 kg)
Operation Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg)
Working Width 28 ft. 9 in. (8.8 m) 30 ft. 9 in. (9.4 m) 32 ft. 9 in. (10.0 m) 34 ft. 9 in. (10.6 m) 36 ft. 9 in. (11.2 m)
Transport Width 15 ft. 1 in. (4.6 m) 15 ft. 1 in. (4.6 m) 15 ft. 1 in. (4.6 m) 15 ft. 1 in. (4.6 m) 15 ft. 1 in. (4.6 m)
Transport Height 7 ft. 7 in. (2.3 m) 7 ft. 10 in. (2.4 m) 8 ft. 0 in. (2.4 m) 7 ft. 11 in. (2.4 m) 8 ft. 1 in. (2.5 m)
Overall Length, Drawbar Retracted 22 ft. 8 in. (6.9 m) 22 ft. 11 in. (7.0 m) 23 ft. 1 in. (7.0 m) 23 ft. 4 in. (7.1 m) 23 ft. 6 in. (7.2 m)
Overall Length, Drawbar Extended 29 ft. 2 in. (8.9 m) 29 ft. 5 in. (9.0 m) 29 ft. 7 in. (9.0 m) 29 ft. 10 in. (9.1 m) 30 ft. 0 in. (9.1 m)
Road Clearance
XLDS, XLD, XLO, XLC, XLHS, XLH, XLHR Models 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm)
XLVS, XLV Models 11 in. (279 mm) 11 in. (279 mm) 11 in. (279 mm) 11 in. (279 mm) 11 in. (279 mm)
Mechanical Transport Lock Standard Standard Standard Standard Standard
Hydraulic Circuits Required 1 1 1 1 1
Number of Pulverizer Wheels
(XLDS) 20" Notched Ductile Iron Wheels with Scrapers 90 96 102 108 114
(XLD) 20" Notched Ductile Iron Wheels Excluding Scrapers 90 96 102 108 114
(XLO) 20" Optimizer Ductile Iron Wheels 59 63 67 71 75
(XLC) 20" Crowfoot Ductile Iron Wheels 59 63 67 71 75
(XLHS) 20" Notched Ductile Iron H (Heavy) Wheels with Scrapers 90 96 102 108 114
(XLH) 20" Notched Ductile Iron H (Heavy) Wheels Excluding Scrapers 90 96 102 108 114
(XLHR) 20" Notched Ductile Iron H (Heavy) Wheels with Sprockets 90 96 102 N/A N/A
(XLVS) 22" V-Style Ductile Iron Wheels with Scrapers (6 in. Spacing) 59 63 67 71 75
(XLV) 22" V-Style Ductile Iron Wheels Excluding Scrapers (6 in. Spacing) 59 63 67 71 75
Axle Size
XLDS, XLD, XLO, XLC, XLHS, XLH, XLHR Models 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm)
XLVS, XLV Models 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
Hitch Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport
Tire Size 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims
Scraper Kits Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S'
Weight Kit Optional Optional Optional Optional Optional
Electronic Acre Meter Optional Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard
Horsepower Requirements 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m)
Horsepower Requirements As Companion Tool 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m)
Recommended Operating Speed 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h)

XXL Series, Folding Pulverizer - 38' to 46' Models

XXL38 XXL40 XXL42 XXL44 XXL46
Approximate Weight
(XXLDS) 20" Notched Ductile Iron Wheels with Scrapers 9,726 lbs. (4,412 kg) 9,996 lbs. (4,534 kg) 10,528 lbs. (4,775 kg) 10,817 lbs. (4,907 kg) 11,106 lbs. (5,038 kg)
(XXLD) 20" Notched Ductile Iron Wheels Excluding Scrapers 9,330 lbs. (4,232 kg) 9,585 lbs. (4,348 kg) 10,102 lbs. (4,582 kg) 10,376 lbs. (4,706 kg) 10,651 lbs. (4,831 kg)
(XXLO) 20" Optimizer Ductile Iron Wheels 10,225 lbs. (4,638 kg) 10,531 lbs. (4,777 kg) 11,104 lbs. (5,037 kg) 11,429 lbs. (5,184 kg) 11,746 lbs. (5,328 kg)
(XXLC) 20" Crowfoot Ductile Iron Wheels 8,860 lbs. (4,019 kg) 9,092 lbs. (4,124 kg) 9,592 lbs. (4,351 kg) 9,844 lbs. (4,465 kg) 10,097 lbs. (4,580 kg)
(XXLVS) 22" V-Style Ductile Iron Wheels with Scrapers 10,654 lbs. (4,833 kg) 11,230 lbs. (5,094 kg) 11,543 lbs. (5,236 kg) 11,886 lbs. (5,391 kg) 12,230 lbs. (5,547 kg)
(XXLV) 22" V-Style Ductile Iron Wheels Excluding Scrapers 9,844 lbs. (4,466 kg) 10,385 lbs. (4,711 kg) 10,683 lbs. (4,846 kg) 10,990 lbs. (4,985 kg) 11,298 lbs. (5,125 kg)
Approximate Tongue Weight
Drawbar Retracted, Transport 963 lbs. (437 kg) 967 lbs. (439 kg) 974 lbs. (442 kg) 979 lbs. (444 kg) 983 lbs. (446 kg)
Drawbar Extended, Transport 795 lbs. (361 kg) 797 lbs. (362 kg) 800 lbs. (363 kg) 801 lbs. (363 kg) 804 lbs. (365 kg)
Operation Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg) Under 500 lbs. (227 kg)
Working Width 38 ft. 4 in. (11.7 m) 40 ft. 4 in. (12.3 m) 42 ft. 4 in. (12.9 m) 44 ft. 4 in. (13.5 m) 46 ft. 4 in. (14.1 m)
Transport Width 18 ft. 1 in. (5.5 m) 18 ft. 1 in. (5.5 m) 18 ft. 1 in. (5.5 m) 18 ft. 1 in. (5.5 m) 18 ft. 1 in. (5.5 m)
Transport Height 8 ft. 2 in. (2.5 m) 8 ft. 3 in. (2.5 m) 8 ft. 5 in. (2.6 m) 8 ft. 7 in. (2.6 m) 8 ft. 9 in. (2.7 m)
Overall Length, Drawbar Retracted 22 ft. 4 in. (6.8 m) 22 ft. 6 in. (6.9 m) 22 ft. 7 in. (6.9 m) 22 ft. 9 in. (6.9 m) 22 ft. 11 in. (7.0 m)
Overall Length, Drawbar Extended 28 ft. 10 in. (8.8 m) 29 ft. 0 in. (8.8 m) 29 ft. 1 in. (8.9 m) 29 ft. 3 in. (8.9 m) 29 ft. 5 in. (9.0 m)
Road Clearance
XXLDS, XXLD, XXLO, XXLC Models 15.25 in. (387 mm) 15.25 in. (387 mm) 15.25 in. (387 mm) 15.25 in. (387 mm) 15.25 in. (387 mm)
XXLVS, XXLV Models 14.25 in. (362 mm) 14.25 in. (362 mm) 14.25 in. (362 mm) 14.25 in. (362 mm) 14.25 in. (362 mm)
Mechanical Transport Lock Standard Standard Standard Standard Standard
Hydraulic Circuits Required 1 1 1 1 1
Number of Pulverizer Wheels
(XXLDS) 20" Notched Ductile Iron Wheels with Scrapers 117 123 129 135 141
(XXLD) 20" Notched Ductile Iron Wheels Excluding Scrapers 117 123 129 135 141
(XXLO) 20" Optimizer Ductile Iron Wheels 77 81 85 89 93
(XXLC) 20" Crowfoot Ductile Iron Wheels 77 81 85 89 93
(XXLVS) 22" V-Style Ductile Iron Wheels with Scrapers (6 in. Spacing) 76 80 82 86 90
(XXLV) 22" V-Style Ductile Iron Wheels Excluding Scrapers (6 in. Spacing) 76 80 82 86 90
Axle Size
XXLDS, XXLD, XXLO, XXLC Models 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm) 8 in. (203 mm)
XXLVS, XLLV Models 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
Hitch Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport
Tire Size 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims 11L x 15 Tires on 6 Bolt Rims
Scraper Kits Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S' Standard on Models with 'S'
Electronic Acre Meter Optional Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard
Horsepower Requirements 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m) 3 to 5 HP per ft. (2.2 to 3.7 kW per m)
Horsepower Requirements As Companion Tool 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m) 1 to 3 HP per ft. (0.75 to 2.2 kW per m)
Recommended Operating Speed 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h) 3 to 8 MPH (4.8 to 12.9 km/h)

PT Series, Rotating Frame Transport Models

PT10 PT12 PT14 PT15 PT16 PT17 PT18 PT20
Approximate Weight
(PDT) 20" Notched Ductile Iron Wheels 1,828 lbs. (823 kg) 2,050 lbs. (923 kg) 2,262 lbs. (1,018 kg) N/A 2,472 lbs. (1,112 kg) N/A 2,811 lbs. (1,265 kg) 3,041 lbs. (1,368 kg)
(PDCT) 20" Crowfoot Ductile Iron Wheels 1,707 lbs. (768 kg) 2,027 lbs. (912 kg) 2,284 lbs. (1,028 kg) N/A 2,496 lbs. (1,123 kg) N/A 2,720 lbs. (1,224 kg) 2,944 lbs. (1,335 kg)
(POT) 20" Optimizer Ductile Iron Wheels 2,052 lbs. (931 kg) 2,254 lbs. (1,014 kg) 2,500 lbs. (1,125 kg) 2,642 lbs. (1,189 kg) 2,742 lbs. (1,234 kg) 3,035 lbs. (1,366 kg) 3,135 lbs. (1,411 kg) 3,387 lbs. (1,524 kg)
(PVT) 22" V-Style Ductile Iron Wheels 2,223 lbs. (1,008 kg) 2,565 lbs. (1,163 kg) 2,844 lbs. (1,290 kg) 3,006 lbs. (1,363 kg) 3,122 lbs. (1,416 kg) 3,343 lbs. (1,516 kg) 3,460 lbs. (1,569 kg) 3,844 lbs. (1,744 kg)
Working Width 10 ft. 0 in. (3.0 m) 12 ft. 0 in. (3.6 m) 14 ft. 0 in. (4.2 m) 15 ft. 0 in. (4.6 m) 16 ft. 0 in. (4.8 m) 17 ft. 0 in. (5.2 m) 18 ft. 0 in. (6.48 m) 20 ft. 0 in. (6.0 m)
Transport Width 11 ft. 0 in. (3.3 m) 13 ft. 2 in. (3.9 m) 15 ft. 2 in. (4.5 m) 17 ft. 2 in. (5.15 m) 17 ft. 2 in. (5.15 m) 19 ft. 2 in. (5.75 m) 19 ft. 2 in. (5.75 m) 21 ft. 2 in. (6.35 m)
Transport Height 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m)
Overall Length, Transport 14 ft. 3 in. (4.27 m) 14 ft. 3 in. (4.27 m) 14 ft. 3 in. (4.27 m) 14 ft. 3 in. (4.27 m) 14 ft. 3 in. (4.27 m) 14 ft. 3 in. (4.27 m) 14 ft. 3 in. (4.27 m) 14 ft. 3 in. (4.27 m)
Overall Length, Operation 16 ft. 9 in. (5 m) 16 ft. 9 in. (5 m) 16 ft. 9 in. (5 m) 16 ft. 9 in. (5 m) 16 ft. 9 in. (5 m) 16 ft. 9 in. (5 m) 16 ft. 9 in. (5 m) 16 ft. 9 in. (5 m)
Number of Pulverizer Wheels
(PDT) 20" Notched Ductile Iron Wheels 30 36 42 N/A 48 N/A 54 60
(PDCT) 20" Crowfoot Ductile Iron Wheels 20 24 28 N/A 32 N/A 36 40
(POT) 20" Optimizer Ductile Iron Wheels 20 24 28 30 32 34 36 40
(PVT) 22" V-Style Ductile Iron Wheels (6 in. Spacing) 20 24 28 30 32 34 36 40
Axle Size
(PDT) 20" Notched Ductile Iron Wheels 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) N/A 4 in. (100 mm) N/A 4.5 in. (114 mm) 4.5 in. (114 mm)
(PDCT) 20" Crowfoot Ductile Iron Wheels 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) N/A 4 in. (100 mm) N/A 4.5 in. (114 mm) 4.5 in. (114 mm)
(POT) 20" Optimizer Ductile Iron Wheels 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
(PVT) 22" V-Style Ductile Iron Wheels 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
Hitch Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport
Tire Size 9.5L x 15-6 Ply Implement Rib 9.5L x 15-6 Ply Implement Rib 9.5L x 15-6 Ply Implement Rib 9.5L x 15-6 Ply Implement Rib 9.5L x 15-6 Ply Implement Rib 9.5L x 15-6 Ply Implement Rib 9.5L x 15-6 Ply Implement Rib 9.5L x 15-6 Ply Implement Rib
Scraper Kits Optional for PDT & PVT Series Optional for PDT & PVT Series Optional for PDT & PVT Series Optional for PDT & PVT Series Optional for PDT & PVT Series Optional for PDT & PVT Series Optional for PDT & PVT Series Optional for PDT & PVT Series
Rear Hitch Kit Optional Optional Optional Optional Optional Optional Optional Optional
Dual Wheel Kit Optional Optional Optional Optional Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem Standard Standard Standard Standard Standard Standard Standard Standard
Safety Chain Kit Standard Standard Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard Standard Standard Standard
Horsepower Requirements 50 HP (40.3 kW) 50 HP (40.3 kW) 60 HP (44.8 kW) 60 HP (44.8 kW) 60 HP (44.8 kW) 60 HP (44.8 kW) 70 HP (52 .2 kW) 70 HP (52 .2 kW)
Recommended Operating Speed 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h)

P Series, Pull-Type/No Transport Models

P5 P6 P7 P8 P10 P12 P14 P16
Approximate Weight
(PM) 16" Notched Gray Iron Wheels 774 lbs. (348 kg) 903 lbs. (406 kg) 1,032 lbs. (464 kg) 1,163 lbs. (523 kg) N/A N/A N/A N/A
(PD) 20" Notched Ductile Iron Wheels 617 lbs. (278 kg) 715 lbs. (322 kg) 813 lbs. (366 kg) 912 lbs. (410 kg) 1,567 lbs. (705 kg) 1,798 lbs. (805 kg) 2,001 lbs. (900 kg) 2,195 lbs. (988 kg)
(PC) 16" Crowfoot Gray Iron Wheels 679 lbs. (305 kg) 791 lbs. (356 kg) 902 lbs. (406 kg) 1,014 lbs. (456 kg) N/A N/A N/A N/A
(PDC) 20" Crowfoot Ductile Iron Wheels N/A N/A N/A N/A 1,449 lbs. (652 kg) 1,774 lbs. (798 kg) 1,988 lbs. (894 kg) 2,183 lbs. (982 kg)
Working Width 5 ft. 0 in. (1.5 m) 6 ft. 0 in. (1.8 m) 7 ft. 0 in. (2.1 m) 8 ft. 0 in. (2.4 m) 10 ft. 0 in. (3 m) 12 ft. 0 in. (3.6 m) 14 ft. 0 in. (4.2 m) 16 ft. 0 in. (4.8 m)
Transport Width 5 ft. 8 in. (1.7 m) 6 ft. 8 in. (2.0 m) 7 ft. 8 in. (2.3 m) 8 ft. 8 in. (2.6 m) 11 ft. 2 in. (3.4 m) 13 ft. 2 in. (4.7 m) 15 ft. 2 in. (5.4 m) 17 ft. 2 in. (6.2 m)
Transport Height 2 ft. 6 in. (750 mm) 2 ft. 6 in. (750 mm) 2 ft. 6 in. (750 mm) 2 ft. 6 in. (750 mm) 3 ft. 0 in. (914 mm) 3 ft. 0 in. (914 mm) 3 ft. 0 in. (914 mm) 3 ft. 0 in. (914 mm)
Overall Length 7 ft. 9 in. (2.33 m) 7 ft. 9 in. (2.33 m) 7 ft. 9 in. (2.33 m) 7 ft. 9 in. (2.33 m) 14 ft. 3 in. (5.1 m) 14 ft. 3 in. (5.1 m) 14 ft. 3 in. (5.1 m) 14 ft. 3 in. (5.1 m)
Number of Pulverizer Wheels
(PM) 16" Notched Gray Iron Wheels 15 18 21 24 N/A N/A N/A N/A
(PD) 20" Notched Ductile Iron Wheels 15 18 21 24 30 36 42 48
(PC) 16" Crowfoot Gray Iron Wheels 10 12 14 16 N/A N/A N/A N/A
(PDC) 20" Crowfoot Ductile Iron Wheels N/A N/A N/A N/A 20 24 28 32
Axle Size 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm)
Hitch Pull-Type/No Transport Pull-Type/No Transport Pull-Type/No Transport Pull-Type/No Transport Pull-Type/No Transport Pull-Type/No Transport Pull-Type/No Transport Pull-Type/No Transport
Scraper Kits Optional for PM & PD Series Optional for PM & PD Series Optional for PM & PD Series Optional for PM & PD Series Optional for PD Series Optional for PD Series Optional for PD Series Optional for PD Series
Hydraulic Transport Kit N/A N/A N/A N/A Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem SMV Emblem Only SMV Emblem Only SMV Emblem Only SMV Emblem Only Standard Standard Standard Standard
Safety Chain Kit N/A N/A N/A N/A Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard Standard Standard Standard
Horsepower Requirements 35 HP (26.88 kW) and up 35 HP (26.88 kW) and up 45 HP (33.6 kW) 45 HP (33.6 kW) 50 HP (40.3 kW) 50 HP (40.3 kW) 60 HP (44.8 kW) 60 HP (44.8 kW)
Recommended Operating Speed 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h)

PP Series, Three-Point Hitch Models

PP5 PP6 PP7 PP8 PP10 PP12 PP14 PP16 PP18 PP20
Approximate Weight
(PPM) 16" Notched Gray Iron Wheels 676 lbs. (304 kg) 788 lbs. (355 kg) 900 lbs. (405 kg) 1,012 lbs. (455 kg) N/A N/A N/A N/A N/A N/A
(PPD) 20" Notched Ductile Iron Wheels 631 lbs. (284 kg) 734 lbs. (333 kg) 837 lbs. (377 kg) 940 lbs. (423 kg) 1,568 lbs. (706 kg) 1,792 lbs. (806 kg) 2,016 lbs. (907 kg) 2,386 lbs. (1,074 kg) 2,769 lbs. (1,246 kg) 3,026 lbs. (1,362 kg)
(PPC) 16" Crowfoot Gray Iron Wheels 686 lbs. (309 kg) 800 lbs. (360 kg) 914 lbs. (411 kg) 1,028 lbs. (463 kg) N/A N/A N/A N/A N/A N/A
(PPO) 20" Optimizer Ductile Iron Wheels N/A N/A N/A N/A 1,653 lbs. (744 kg) 1,997 lbs. (899 kg) 2,253 lbs. (1,014 kg) 2,607 lbs. (1,173 kg) 2,921 lbs. (1,314 kg) 3,216 lbs. (1,447 kg)
Working Width 5 ft. 0 in. (1.5 m) 6 ft. 0 in. (1.8 m) 7 ft. 0 in. (2.1 m) 8 ft. 0 in. (2.4 m) 10 ft. 0 in. (3.0 m) 12 ft. 0 in. (3.6 m) 14 ft. 0 in. (4.2 m) 16 ft. 0 in. (4.8 m) 18 ft. 0 in. (5.4 m) 20 ft. 0 in. (6 m)
Transport Width 5 ft. 8 in. (1.7 m) 6 ft. 8 in. (2.0 m) 7 ft. 8 in. (2.3 m) 8 ft. 8 in. (2.6 m) 11 ft. 2 in. (3.4 m) 13 ft. 2 in. (4.7 m) 15 ft. 2 in. (5.4 m) 17 ft. 2 in. (6.2 m) 19 ft. 2 in. (5.75 m) 21 ft. 2 in. (6.35 m)
Transport Height Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor
Overall Length 2 ft. 0 in. (600 mm) 2 ft. 0 in. (600 mm) 2 ft. 0 in. (600 mm) 2 ft. 0 in. (600 mm) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m)
Number of Pulverizer Wheels
(PPM) 16" Notched Gray Iron Wheels 15 18 21 24 N/A N/A N/A N/A N/A N/A
(PPD) 20" Notched Ductile Iron Wheels 15 18 21 24 30 36 42 48 54 60
(PPC) 16" Crowfoot Gray Iron Wheels 10 12 14 16 N/A N/A N/A N/A N/A N/A
(PPO) 20" Optimizer Ductile Iron Wheels N/A N/A N/A N/A 20 24 28 32 36 40
Axle Size
(PPM) 16" Notched Gray Iron Wheels 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) N/A N/A N/A N/A N/A N/A
(PPD) 20" Notched Ductile Iron Wheels 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
(PPC) 16" Crowfoot Gray Iron Wheels 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) 4 in. (100 mm) N/A N/A N/A N/A N/A N/A
(PPO) 20" Optimizer Ductile Iron Wheels N/A N/A N/A N/A 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
Three-Point Hitch Cat. I Cat. I Cat. I Cat. I, II Cat. I, II Cat. I, II Cat. I, II Cat. I, II Cat. I, II Cat. I, II
Pull-Type Hitch Optional Optional Optional Optional N/A N/A N/A N/A N/A N/A
Scraper Kits Optional for PPM & PPD Series Optional for PPM & PPD Series Optional for PPM & PPD Series Optional for PPM & PPD Series Optional for PPD Series Optional for PPD Series Optional for PPD Series Optional for PPD Series Optional for PPD Series Optional for PPD Series
S-Tine Track Remover Kit N/A N/A N/A N/A Optional Optional Optional Optional Optional Optional
Rear Hitch N/A N/A N/A N/A Optional Optional Optional Optional Optional Optional
LED Safety Warning Lights & SMV Emblem SMV Emblem Only SMV Emblem Only SMV Emblem Only SMV Emblem Only Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Horsepower Requirements 35 HP (26.88 kW) and up 35 HP (26.88 kW) and up 45 HP (33.6 kW) 45 HP (33.6 kW) 60 HP (44.8 kW) 60 HP (44.8 kW) 75 HP (56 kW) 75 HP (56 kW) 90 HP (67.2 kW) 90 HP (67.2 kW)
Recommended Operating Speed 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h)

PFT Series, Floating Ring Models

PPF6B12 PPF8B12 PPF10B12 PPF12B12 PPF14B12 PPF15B12 PPF16B12 PPF17B12 PPF18B12 PFT10B12 PFT12B12 PFT14B12 PFT15B12 PFT16B12 PFT17B12 PFT18B12 PFT20B12 PFT22B12
Approximate Weight 1,601 lbs. (720 kg) 2,020 lbs. (909 kg) 2,580 lbs. (1,161 kg) 3,056 lbs. (1,375 kg) 3,490 lbs. (1,571 kg) 3,729 lbs. (1,678 kg) 3,924 lbs. (1,765 kg) 4,350 lbs. (1,958 kg) 4,385 lbs. (1,973 kg) 3,205 lbs. (1,442 kg) 3,681 lbs. (1,656 kg) 4,115 lbs. (1,852 kg) 4,354 lbs. (1,959 kg) 4,549 lbs. (2,047 kg) 4,775 lbs. (2,149 kg) 4,998 lbs. (2,249 kg) 6,120 lbs. (2,776 kg) 6,599 lbs. (2,993 kg)
Working Width 6 ft. 0 in. (1.8 m) 8 ft. 0 in. (2.4 m) 10 ft. 0 in. (3 m) 12 ft. 0 in. (3.6 m) 14 ft. 0 in. (4.2 m) 15 ft. 0 in. (4.5 m) 16 ft. 0 in. (4.8 m) 17 ft. 0 in. (5.1 m) 18 ft. 0 in. (5.4 m) 10 ft. 0 in. (3 m) 12 ft. 0 in. (3.6 m) 14 ft. 0 in. (4.2 m) 15 ft. 0 in. (4.5 m) 16 ft. 0 in. (4.8 m) 17 ft. 0 in. (5.1 m) 18 ft. 0 in. (5.4 m) 20 ft. 0 in. (6.1 m) 22 ft. 0 in. (6.7 m)
Transport Width 7 ft. 4 in. (2.2 m) 9 ft. 4 in. (2.8 m) 11 ft. 4 in. (3.4 m) 13 ft. 4 in. (4.1 m) 15 ft. 4 in. (4.6 m) 16 ft. 4 in. (4.9 m) 17 ft. 4 in. (5.2 m) 19 ft. 4 in. (5.8 m) 19 ft. 4 in. (5.8 m) 11 ft. 4 in. (3.4 m) 13 ft. 4 in. (4.1 m) 16 ft. 4 in. (4.9 m) 16 ft. 4 in. (4.9 m) 17 ft. 4 in. (5.2 m) 19 ft. 4 in. (5.8 m) 19 ft. 4 in. (5.8 m) 21 ft. 0 in. (6.4 m) 23 ft. 0 in. (7.0 m)
Transport Height Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor Dependent Upon Tractor 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m)
Overall Length, Transport 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m) 12 ft. 6 in. (3.75 m)
Overall Length, Operation 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 4 ft. 3 in. (1.27 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m) 15 ft. 4 in. (4.60 m)
Main Frame Structure 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm) 7 in. x 7 in. (178 mm x 178 mm)
Pulverizer Wheels 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings 20 in. (500 mm) Ductile Iron Rings
Number of Wheels 30 40 50 60 70 75 80 85 90 50 60 70 75 80 85 90 97 107
Axle Size 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm)
Tire Size N/A N/A N/A N/A N/A N/A N/A N/A N/A 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib 11L x 15-8 Implement Rib
Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Cat. II, III Three-Point Hitch Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport Pull-Type with Hydraulic Transport
Dual Wheel Kit N/A N/A N/A N/A N/A N/A N/A N/A Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Single Wheel Kit N/A N/A N/A N/A N/A N/A N/A N/A Standard Standard Standard Standard Standard Standard Standard Standard N/A N/A
LED Safety Warning Lights & SMV Emblem Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Safety Chain Kit N/A N/A N/A N/A N/A N/A N/A N/A Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Powder Coat Paint, Red Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Horsepower Requirements 50 HP (37.3 kW) and up 50 HP (37.3 kW) and up 75 HP (56 kW) 75 HP (56 kW) 75 HP (56 kW) 90 HP (67.2 kW) 90 HP (67.2 kW) 90 HP (67.2 kW) 90 HP (67.2 kW) 75 HP (56 kW) 75 HP (56 kW) 75 HP (56 kW) 90 HP (67.2 kW) 90 HP (67.2 kW) 90 HP (67.2 kW) 90 HP (67.2 kW) 90 HP (67.2 kW) 90 HP (67.2 kW)
Recommended Operating Speed 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h)

SD Series, Double Gang Models

SDP-6 SD-8 SDP-8 SD-10 SDP-10 SD-12 SDP-12
Approximate Weight 845 lbs. (380 kg) 1,886 lbs. (849 kg) 1,560 lbs. (702 kg) 2,188 lbs. (985 kg) 1,851 lbs. (833 kg) 2,386 lbs. (1,074 kg) 2,118 lbs. (953 kg)
Working Width 6 ft. 0 in. (1.8 m) 8 ft. 0 in. (2.4 m) 8 ft. 0 in. (2.4 m) 10 ft. 0 in. (3.0 m) 10 ft. 0 in. (3.0 m) 12 ft. 0 in. (3.60 m) 12 ft. 0 in. (3.60 m)
Transport Width 7 ft. 0 in. (2.1 m) 11 ft. 1 in. (3.33 m) 9 ft. 6 in. (2.85 m) 12 ft. 11 in. (3.88 m) 11 ft. 4 in. (3.40 m) 15 ft. 0 in. (4.5 m) 13 ft. 3 in. (3.98 m)
Transport Height 2 ft. 10 in. (.85 m) 2 ft. 10 in. (.85 m) 2 ft. 10 in. (.85 m) 2 ft. 10 in. (.85 m) 2 ft. 10 in. (.85 m) 2 ft. 10 in. (.85 m) 2 ft. 10 in. (.85 m)
Overall Length 2 ft. 4 in. (.70 m) 13 ft. 2 in. (3.95 m) 5 ft. 6 in. (1.65 m) 13 ft. 2 in. (3.95 m) 5 ft. 6 in. (1.65 m) 13 ft. 2 in. (3.95 m) 5 ft. 6 in. (1.65 m)
Transport Tires N/A 7.6 x 15 Ply Tires N/A 7.6 x 15 Ply Tires N/A 7.6 x 15 Ply Tires N/A
Pulverizer Wheels, Front Gang 12 in. (300 mm) Gray Iron 16 in. (400 mm) Gray Iron 16 in. (400 mm) Gray Iron 16 in. (400 mm) Gray Iron 16 in. (400 mm) Gray Iron 16 in. (400 mm) Gray Iron 16 in. (400 mm) Gray Iron
Number of Wheels, Front Gang 31 40 40 50 50 61 61
Axle Size, Front Gang 8.625 in. (216 mm) 12.75 in. (319 mm) 12.75 in. (319 mm) 12.75 in. (319 mm) 12.75 in. (319 mm) 12.75 in. (319 mm) 12.75 in. (319 mm)
Pulverizer Wheels, Rear Gang 10 in. (250 mm) Gray Iron 12 in. (300 mm) Gray Iron 12 in. (300 mm) Gray Iron 12 in. (300 mm) Gray Iron 12 in. (300 mm) Gray Iron 12 in. (300 mm) Gray Iron 12 in. (300 mm) Gray Iron
Number of Wheels, Rear Gang 32 41 41 52 52 62 62
Axle Size, Rear Gang 1.75 in. (43.75 mm) 8.625 in. (216 mm) 8.625 in. (216 mm) 8.625 in. (216 mm) 8.625 in. (216 mm) 8.625 in. (216 mm) 8.625 in. (216 mm)
Hitch Cat. I Three-Point Pull-Type Hydraulic Transport Cat. II Three-Point Pull-Type Hydraulic Transport Cat. II Three-Point Pull-Type Hydraulic Transport Cat. II Three-Point
LED Safety Warning Lights & SMV Emblem SMV Emblem Only Standard Standard Standard Standard Standard Standard
Safety Chain Kit N/A Standard N/A Standard N/A Standard N/A
Powder Coat Paint, Red Standard Standard Standard Standard Standard Standard Standard
Horsepower Requirements 35 HP (26.88 kW) and up 55 HP (42.24 kW) and up 55 HP (42.24 kW) and up 65 HP (49.92 kW) and up 65 HP (49.92 kW) and up 80 HP (61.44 kW) and up 80 HP (61.44 kW) and up
Recommended Operating Speed 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h) 3 to 6 MPH (5 to 10 km/h)

Specifications subject to change without notice.

Literature

View Literature

Pulverizer

Pulverizer (Printer Friendly)

Request Printed Literature

If you would like us to send you our product brochure, printed full-color on glossy paper stock, please fill out and submit the form below.

Note: To request literature for multiple products, visit our Literature Request page.


 
 

Manuals

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 22' to 36' Wing Float Pulverizer models.

This manual contains repair part listings for 22' to 36' Wing Float Pulverizer models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 38' to 52' Wing Float Pulverizer models.

This manual contains repair part listings for 38' to 52' Wing Float Pulverizer models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 19' to 27' Folding Pulverizer - X Series models.

This manual contains repair part listings for 19' to 27' Folding Pulverizer - X Series models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 28' to 36' Folding Pulverizer - XL Series models.

This manual contains repair part listings for 28' to 36' Folding Pulverizer - XL Series models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 38' to 46' Folding Pulverizer - XXL Series models.

This manual contains repair part listings for 38' to 46' Folding Pulverizer - XXL Series models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 10' to 20' Transport Pulverizer - PT Series models.

This manual contains repair part listings for 10' to 20' Transport Pulverizer - PT Series models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 10' to 20' Non-Transport Pulverizer - P/PP Series models. This manual also includes a repair parts listing.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 5' to 8' Pulverizer - PP Series models. This manual also includes a repair parts listing.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 6' to 18' Three-Point Hitch Floating Ring Pulverizer - PPF Series models. This manual also includes a repair parts listing.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 10' to 18' Pull-Type Floating Ring Pulverizer - PFT Series models.

This manual contains repair part listings for 10' to 18' Pull-Type Floating Ring Pulverizer - PFT Series models.

This manual will familiarize you with safety, assembly, operation, adjustment, troubleshooting and maintenance for 20' to 22' Pull-Type Floating Ring Pulverizer - PFT Series models.

This manual contains repair part listings for 20' to 22' Pull-Type Floating Ring Pulverizer - PFT Series models.

To view manuals for previous versions of this or a different product line, click here.

Home > Products > Farm Equipment > Brillion Farm Equipment > Pulverizer